ページ1に含まれる内容の要旨
OWNER’S
INSTRUCTION MANUAL
CALLER ID TYPE II
MULTI-FEATURE TELEPHONE
MODEL 9125
1
ページ2に含まれる内容の要旨
THANK YOU FOR PURCHASING THE 9125 CALLER ID TYPE II MULTI-FEATURE TELEPHONE We want you to know all about your new Telephone, how to install it, the features it provides, and the services you can expect from its use. We have included this informa- tion in your Owner’s Instruction Manual. PLEASE READ BEFORE INSTALLING AND USING YOUR NEW TELEPHONE EQUIPMENT. 2
ページ3に含まれる内容の要旨
Table Of Contents IMPORTANT SAFETY INSTRUCTIONS ................................ 5 TELEPHONE PART IDENTIFICATION ................................. 7 INSTALLATION .......................................................................... 9 BOX CONTENTS .............................................................................................................. 9 BATTERY INSTALLATION ............................................................................................. 9 DIALING MODE .....
ページ4に含まれる内容の要旨
CONTRAST BUTTON .................................................................................................... 16 REPROGRAMMING NETWORK SERVICE BUTTONS ............................................. 16 SPEAKER BUTTON ....................................................................................................... 17 SPEED DIAL .............................................................................. 17 STORE NEW NUMBERS ............................................................
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Always follow basic safety precautions when using your telephone equipment to reduce the risk of fire, electrical shock, and injury. 1. Read and understand all instructions in the Owner’s Instruction Manual. 2. Read all warnings and follow all instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. 4. Do not use the telephone near water. For example, do not
ページ6に含まれる内容の要旨
14. Unplug the telephone from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the line cord is frayed or plugs damaged. • If liquid has been spilled into the telephone. • If the telephone has been exposed to rain or water. • If the telephone does not operate properly by following the operating instructions. (Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage and
ページ7に含まれる内容の要旨
TELEPHONE PART IDENTIFICATION 1 M essage Waiting Lamp 17 Dial Keys 2 LCD 18 Volume Down Button 3 Hookswitch 19 Volume Up Button 4 M enu Button 20 Speaker On/Off Button 5 Delete Button 21 Shift Button 6 Save Button 22 Redial Button 7 Direction Buttons 23 Speed Dial Buttons 8 Enter Button 24 M emory 3 Button 9 Speaker 25 M emory 2 Button 10 End Call Button 26 M emory 1 Button 11 Call Forward On Button 27 Hold Button 12 M ute Button 28 Call Forward Off Button 13 Flash Button 29 Clear M essage Butto
ページ8に含まれる内容の要旨
TELEPHONE PART IDENTIFICATION Back and Side 1 D at a J ack 2 R in ger V o lu m e Sw it ch 3 L in e J ack 4 A C A d ap t er J ack 5 H ead s et J ack 6 H an d s et J ack 8
ページ9に含まれる内容の要旨
INSTALLATION BOX CONTENTS Verify that the following items are in the box. • Telephone • Handset • Handset Cord • Line Cord • 3 AA Batteries • Power Adapter • Instruction Manual BATTERY INSTALLATION The 9125 telephone requires 3 AA size 1.5 V batteries for the LCD display. To install the batteries, follow the steps below: 1. Remove the battery cover. The cover is located underneath your phone. 2. Insert 3 AA size 1.5 V batteries. Be careful to observe the polarity markings in the battery compa
ページ10に含まれる内容の要旨
DESK MOUNT 1. Press in the two areas shown below to release the desk stand. 2. Rotate the desk stand into the desk mounting position as shown below. 3. Connect the power adapter and the line cord. See Steps 2 and 3 in the WALL MOUNT instructions. 4. Plug the coiled cord into the handset, and then plug the other end of the cord into the handset jack. 5. Place the handset on the base. ANSWERING MACHINE 1. Connect the LINE jack of the answering machine to the wall telephone jack. 2. Connect the T
ページ11に含まれる内容の要旨
UNIT SETUP Use MENU to enter the setup screen. 1. Press MENU. PHONE BOOK appears on the display. The Phone Book is covered in a later section. 2. Press . When CALL WAITING appears, press ENTER. Then use to toggle this feature ON or OFF. If this is set to OFF, Caller ID information will not be displayed for a Call Waiting call. Press ENTER to exit. 3. Press . When DATE FORMAT appears, press ENTER. Then use to select either Month-Day (MM-DD) and Day-Month (DD-MM). Press ENTER to exit. 4.
ページ12に含まれる内容の要旨
9. Press MENU. Then press or until LCD CONTRAST appears. Press ENTER to set the contrast. Use or to set the contrast. There are 8 choices available. Press ENTER to exit to idle screen. 10. Press MENU. Then press or until BACK LIGHT appears. Press ENTER. The display will show BACK LIGHT TIME. Press ENTER. The display will show the back light time. Use or to select between 30 sec, 20 sec, 10 sec or OFF. Press ENTER. The display will show BACK LIGHT TIME. Press or . The displ
ページ13に含まれる内容の要旨
BASIC OPERATION RECEIVING A PHONE CALL When the phone rings, lift the handset, press HEADSET or press SPEAKER to begin your conversation. You can adjust the volume of the caller’s voice by pressing the Volume Buttons on the base of the telephone. PLACING A PHONE CALL 1. Lift the handset, press HEADSET or press SPEAKER and wait for a dial tone. 2. Dial the telephone number you wish to call. The number will appear on the display window. PREDIAL 1. While the handset is on hook, enter the desired t
ページ14に含まれる内容の要旨
FEATURE BUTTONS END CALL BUTTON To end a conversation, press END CALL. In handset mode, the phone will go on-hook for 2 seconds and then go off hook again. This allows you to make another call. In speaker or headset mode, the phone will go on hook. MUTE BUTTON Press MUTE to speak without the person on the phone hearing your conversation. “MUTE” will show in the display. To resume the conversation, press MUTE. FLASH BUTTON This telephone provides a line break signal for accessing PABX service
ページ15に含まれる内容の要旨
2. Making A Call a. Press and release HEADSET. b. When you hear a dial tone, dial the number or press a memory button. The number will appear on the display window. c. When your party answers, adjust the volume of the conversation by pressing the Volume Buttons on the base of the telephone. d. After the conversation has finished, press and release HEADSET to hang up. Note: 1. If you wish to switch from headset to handset, simply lift the handset. 2. If you wish to switch from headset to speaker
ページ16に含まれる内容の要旨
CALL FORWARD ON When you come off hook and press this button, the 9125 will dial *72. This is a standard code to activate call forwarding. For more information about call forwarding, contact your telephone company. CALL FORWARD OFF When you come off hook and press this button, the 9125 will dial *73. This is a standard code to deactivate call forwarding. For more information about call forwarding, contact your telephone company. VOLUME BUTTON A built-in amplifier feature allows you to change
ページ17に含まれる内容の要旨
SPEAKER BUTTON This button controls the speakerphone. Press once to activate the speakerphone. Press again to deactivate. SPEED DIAL The 9125 can store up to 20 names and numbers in the memory buttons. Two names and numbers can be programmed in each button. STORE NEW NUMBERS Entering a number 1. Place the phone on hook. 2. Enter the number to be stored. 3. Press and hold the memory button or press SHIFT and then press and hold the memory button until the last digit of the number blinks. 4. Pr
ページ18に含まれる内容の要旨
PHONE BOOK The phonebook can store up to 70 names and numbers. ADDING AN ENTRY TO THE PHONE BOOK 1. Press MENU. 2. The display will show PHONE BOOK 3. Press ENTER. 4. The display will show REVIEW>>. 5. Press 6. 6. The display will show ADD>> 7. Press ENTER. 8. Use the keypad to enter the number. A maximum of 20 digits may be stored. Use 3or DELETE to delete digits. 9. Press and hold ENTER until the cursor flashes in the name area. 10. The cursor will begin to blink on the name line. 11. Use th
ページ19に含まれる内容の要旨
STORING A CALLER ID RECORD IN THE PHONE BOOK 1. Use 5 or 6 to display the number. 2. Press and hold ENTER until the first character of the name begins to flash. 3. Make any desired changes to the name using DELETE to delete letters and the keypad to add letters. 4. Press and hold ENTER until the cursor flashes in an empty number area. 5. Press MENU. CALLER ID Caller ID service will display the name and number of callers. The 9125 is also compatible with Caller ID on Call Waiting (CIDCW). Us
ページ20に含まれる内容の要旨
CALLER ID ON CALL WAITING Call-waiting service alerts you to a new call by playing a tone while you are on a call. Call Waiting Caller ID not only tells you there is another call waiting, but lets you know who the caller is before the call is answered. The name and number of the incoming call will be shown on the display. Press FLASH to place the first call on hold and answer the new call. Press FLASH again to return to the first call. REVIEWING CALLS 1. While on hook, press 5 or 6 to see the
