ページ18に含まれる内容の要旨
PLAYBACK Getting ready to play •Turn on the television, and set its video source (V ideo 1, Video 2, V ideo 3, etc.) to the one connected to this unit. •Turn on the audio device connected to this unit. Set its input source to the one connected to this unit. c 1 3 2,4 Press POWER on this unit. 1 On TV screen, “aiwa DVD VIDEO” screen is displayed. In the display window , “- on-” is displayed then it will change to “no disc”. Press zOPEN/CLOSE. 2 The disc tray opens. Load a disc. 3 2,4 Place a dis
ページ19に含まれる内容の要旨
When the menu screen is displayed Play Back Control (PBC) The menu screen may be displayed first after loading a DVD, super video CD or video CD (version 2.0) which contains a menu. This unit equips Play Back Control (PBC) ON/OFF function. After turning off PBC, super video CDs or video CDs Use ikjl to select the program you would like to (version 2.0) can be played back as well as audio CDs, view, then press ENTER to begin playback. Press TOP without returning to the menu screen. MENU or MENU
ページ20に含まれる内容の要旨
PLAYBACK (CONTINUED) Still (Pause) a c Press a during playback. To return to normal playback Press c or ENTER. rt s Frame advance Press a while the disc is paused. Each time you press the button, the program advances one frame. There is no audio when doing Frame advance. To return to normal playback Press c or ENTER. Numbered buttons CLEAR Stopping playback i/k/j/l/ SLOW ENTER c a g Press s. t r f When s is pressed during playback, the unit remembers s the point at which playback stopped. (r
ページ1に含まれる内容の要旨
DVD PLAYER
CCC
XD-DV270
OPERATING INSTRUCTIONS
CCC
En (English)
CCC
CCC
8A-AV5-902-01
010130AMK-Y-T HRJ HEJ
ページ2に含まれる内容の要旨
ENGLISH WARNING 4Ventilation — The unit should be situated with adequate space around it so that proper heat ventilation is assured. TO REDUCE THE RISK OF FIRE OR Allow a clearance of 10 cm from the rear and the top of ELECTRIC SHOCK, DO NOT EXPOSE THIS the unit, and 5 cm from each side. APPLIANCE TO RAIN OR MOISTURE. - Do not place the unit on a bed, rug, or similar surface that may block the ventilation openings. - Do not install the unit in a bookcase, cabinet, or airtight rack where ventilat
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Programmed playback ........................................... 25 Creating a 3D Surround effect .............................. 26 Introduction Changing audio soundtracks................................ 27 Displaying and changing subtitles....................... 28 Precautions ............................................................... 2 On Screen Display (OSD) ...................................... 29 Before Use .............................................................
ページ4に含まれる内容の要旨
BEFORE USE Please read the following before operating the DVD player. Note on DTS-encoded CDs When playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo outputs. To avoid possible Supported disc formats damage to the audio system, the consumer should turn down the volume before playing back such a disc, adjust This DVD player can play discs with the following marks the volume gradually, and keep the volume level low. To TM TM enjoy DTS playback, an external 5.1 channe
ページ5に含まれる内容の要旨
The order of playing back MP3 Notes on MP3 The unit only plays MP3 tracks in the following order. An MP3 file stores audio data compressed using MPEG1, Root Directory(Album) [Order of Playback] the audio layer-3 file-coding scheme. In this manual, we refer to what are called “folder” and “file” in PC terminology as “album” and “track”. Album 1 Notes on playing MP3 Track 1 [ 1 ] • An MP3 track must be recorded on a disc in the format Track 2 [ 2 ] compliant with ISO 9660. Note, however, that the
ページ6に含まれる内容の要旨
BEFORE USE (CONTINUED) Cleaning discs Handling the unit Fingerprints and dust on the disc can cause poor picture When shipping the this unit quality and sound distortion. Before playing, clean the disc The original shipping carton and packing materials come with a clean cloth. Wipe the disc from the center out. in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting the this unit The picture and sound of a nearby TV, VCR or radio may be distort
ページ7に含まれる内容の要旨
PARTS AND CONTROLS The instructions in this manual refer mainly to the buttons on the remote control. Buttons on the main unit with the same names as those on the remote control can be used as well. Front panel 12 3 45678 9 & ^ %$ # @! 0 POWER button s STOP button 1 9 Press to switch on and off the main power of this unit. Press to stop playing back a disc. 6STANDBY/ON indicator & KEY CONTROL button 2 0 • Lights in red when the unit is in standby mode. Press repeatedly to adjust the key upward
ページ8に含まれる内容の要旨
PARTS AND CONTROLS (CONTINUED) Remote control ! 9MARK button Press to mark any point in a disc (except for MP3 disc) during playback. @ 0 0OPEN/CLOSE button # Press to open and close the disc tray. 9 !ZOOM button $ Press repeatedly to enlarge the picture while playing % back a DVD,super video CD or video CD. SURROUND button @ ^ 8 Press to turn on the 3D Surround effect. & A-B Repeat button # * Press to memorize the point you want to repeat. 7 ( $ANGLE button 6 Press to change the angle while pla
ページ9に含まれる内容の要旨
Display window This unit shows On-Screen Display messages on the screen of the TV set to which this unit is connected, as well as those on the display window of the unit. The On-Screen Display messages, which accompany each operation of the unit, make operation simple and easy especially when playing DVDs or video CDs. They are also displayed when pressing the ON SCREEN DISPLAY ON/OFF button on the remote control. The instructions in this manual refer mainly to the On-Screen Display messages. 1
ページ10に含まれる内容の要旨
CONNECTIONS Before connection, identify the type of your audio equipment or of the TV set referring to the following chart. Then decide the connection and the setup menu according to the types. NOTES • The player cannot be connected to a TV set which is not equipped with a video input connector . •Use a commercially available stereo-monaural audio cord when connecting to a monaural TV set. Audio system to be connected Input jack of equipment to be Referring connected to the DVD player Letter No
ページ11に含まれる内容の要旨
A Connecting to a TV set only Rear of TV set to a video input jack (yellow) to an audio input jacks (Left/white, Right/red) Video cord (supplied) Audio cord (supplied) red yellow white to VIDEO OUT to AUDIO OUT L (white)/ 1 or 2 jack R (red) jacks Rear of the unit (yellow) AUDIO OUT VIDEO S-VIDEO OUT R L COAXIAL OPTICAL DIGITAL AUDIO OUT En to an AC outlet When your TV set is equipped with an S-video input terminal, see page 16. Set the setup menu correctly after connecting! NOTE According to t
ページ12に含まれる内容の要旨
CONNECTIONS (CONTINUED) B Connecting to a TV set and an amplifier with a Digital In jack Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an amplifier with a Digital In jack. The supplied video cord is also available instead of the coaxial cord. TV set to a video input yellow jack (yellow) Video cord (supplied) yellow to VIDEO OUT 1 or 2 yellow jack (yellow) Rear of the unit AUDIO OUT VIDEO S-VIDEO OUT R L COAXIAL OPTICAL DIGITAL AUDIO OUT t
ページ13に含まれる内容の要旨
C Connecting to a TV set and an audio system TV set to a video input jack (yellow) Video cord (supplied) to VIDEO OUT 1 or 2 yellow Rear of the unit jack (yellow) AUDIO OUT VIDEO S-VIDEO OUT R L COAXIAL OPTICAL DIGITAL AUDIO OUT white to AUDIO OUT red L (white)/ R (red) jacks Audio cord (supplied) to an AC outlet to an audio input jacks (Left/ white, Right/ red) En Audio system When your TV set is equipped with an S-video input terminal, see page 16. Set the setup menu correctly after connectin
ページ14に含まれる内容の要旨
CONNECTIONS (CONTINUED) D Connecting to an AV receiver equipped with a Dolby Digital (AC-3) or DTS decoder Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an AV receiver with a Digital In jack. The supplied video cord is also available instead of the coaxial cord. TV set to a video input jack (yellow) Video cord (supplied) yellow to VIDEO OUT 1 or 2 yellow jack (yellow) Rear of the unit Rear of the unit AUDIO OUT VIDEO S-VIDEO OUT R L COAXIA
ページ15に含まれる内容の要旨
E Connecting to a TV set and an AV receiver with the Dolby Pro Logic Surround system TV set to a video input jack (yellow) Video cord (supplied) to VIDEO OUT 1 or 2 yellow jack (yellow) Rear of the unit AUDIO OUT VIDEO S-VIDEO OUT R L COAXIAL OPTICAL DIGITAL AUDIO OUT white to AUDIO OUT L (white)/ R (red) jacks red to an AC outlet Audio cord (supplied) to an audio input jacks Receiver equipped with (Left/ white, Right/ red) Dolby Pro Logic Surround Front Front speaker (L) speaker (R) En Center
ページ16に含まれる内容の要旨
CONNECTIONS (CONTINUED) Connecting to a TV set equipped with S-video jack Rear of TV set S-video input connector (S1, S2) S-video cord (not supplied) to S-VIDEO OUT connector Rear of the unit AUDIO OUT VIDEO S-VIDEO OUT R L COAXIAL OPTICAL DIGITAL AUDIO OUT to an AC outlet Set the setup menu correctly after connecting! NOTES Set the “TV TYPE” of the setup menu correctly referring to • For the best possible picture clarity , it is recommended the following below . that an S (separate) video cord
ページ17に含まれる内容の要旨
REMOTE CONTROL ABOUT SYMBOLS Although this unit can play DVDs, super video CDs, V ideo Installing batteries CDs, Audio CDs or MP3 discs, some of the functions are Detach the battery cover on the rear of the remote control, restricted by the kinds of discs. and insert two R6 (size AA) batteries with 0 and 9 aligned In this operating instructions, the following symbols are used correctly . to make distinction. : Shows the function or the display for only DVDs. : Shows the function or the display
