ページ1に含まれる内容の要旨
OWNER’S MANUAL
GUIDE D’UTILISATION
50” CLASS LED-LCD HDTV
LED-LCD HDTV CATÉGORIE 50 PO
SLED5000
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au télévis
ページ2に含まれる内容の要旨
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended to SHOCK, DO NOT REMOVE COVER alert the user to the presence of (OR BACK). NO USER-SERVICEABLE important operating
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22) When you connect th
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to
ページ6に含まれる内容の要旨
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction. Hold the unit and attach the stand as shown in fi gure 1. Wait Figure 2 Figure 1 Fin
ページ7に含まれる内容の要旨
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. • Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed
ページ8に含まれる内容の要旨
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 F eatures ............................................................ 7 Power source ....................................................7 Contents ...........................................................8 Parts and functions ..................
ページ9に含まれる内容の要旨
Parts and functions Front Right Side INPUT/ENTER button CH (CHANNEL) / / ▲/ ▼ buttons VOL (VOLUME) +/–/ ▶/ ◀/MENU buttons POWER button Remote sensor Power Indicator Red: Standby Green: On To display the menu screen. Press MENU button to display the menu screen. CH (CHANNEL) / buttons, VOL (VOLUME) +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations. Right side PC MONITOR IN jack HDMI/DVI3 IN jack Rear USB INPUT HDMI/DVI1/2 IN jacks
ページ10に含まれる内容の要旨
Remote control 6.CURSOR ▲/ ▼/ ◀/ ▶ Buttons - Use to operate the 12 menu functions of the TV. 1 13 7.ENTER Button - Use to enter or select 2 information for On-Screen operations. 8.MUTE Button - To turn off the sound, press this 3 button once. The TV will be silenced and the symbol will appear on the screen. The muting 4 14 feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) + / – 15 5 buttons. 9.VOL (VOLUME) + / – Buttons - Press the + 6 button to increas
ページ11に含まれる内容の要旨
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. Combination VHF/UHF Antenna (Single 75 ohm cable) Connect the 75 ohm cable from the combination Antenna VHF/UHF antenna to the Antenna Jack. Jack 75 ohm Coaxial Cable Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter
ページ12に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the TV to a VCR Right of the unit VCR To VIDEO/AUDIO IN To Video/Audio OUT Video/Audio cord (not supplied) To connect the TV to a DVD player with Component Video Input You can enjoy a high quali
ページ13に含まれる内容の要旨
Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below. Right of the unit Front Speaker To COAXIAL OUT Subwoofer (Right) TV Front Speaker (Left) Coaxial digital cable (not sup
ページ14に含まれる内容の要旨
Connections to other equipment To connect the TV to a PC (Personal Computer) BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S RESOLUTION AND REFRESH RATE (60 HZ). Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia
ページ15に含まれる内容の要旨
Starting setup TV operation The Initial Setup menu appears the first time you To turn on the TV, press POWER. (POWER 1 turn on the TV, and assists you to specify the indicator on the front of the unit changes green. Air/Cable setting, and program your channels It may take approx. 10 seconds for a picture to automatically. appear on screen.) Adjust the volume level by pressing VOL + or – . IMPORTANT: Make sure that the antenna or cable 2 The volume level will be indicated on the screen
ページ16に含まれる内容の要旨
CH / Quick guide for menu Press and release CH / . The channel automatically stops at the next channel set into operation memory. For proper operation, before selecting channels, they should be set into the memory. See “Channel setup” Call menu and for example: Select Language. on page 20. Press INPUT SELECT to select TV mode. 1 DISPLAY Press DISPLAY to display the current information on 2 Press MENU. The TV menu screen will appear. the screen. Picture Sound Time Setup Lock Channel When
ページ17に含まれる内容の要旨
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the top of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Picture Picture Preference Power Saving The darker the brightness for power-saving Standard Standard picture quality Dynamic Bright and dynamic picture Soft Soft edge picture setting User Your personal preferences Brightness You can adjust the picture qu
ページ18に含まれる内容の要旨
Convenience functions Icon Selected Items Setup hint Sound Equalizer Settings Equalizer Mode Standard / Music / You can choose a basic equalizer mode. Depending on this Movie / Sports setting, the following detail setting is set to default value of each mode. User 150 Hz / 500 Hz/ The setting of this item adjusts the audio level of its 1K Hz/5K Hz/ frequency corresponding to each setting. 10K Hz • Available only when you selected “User”. Balance Adjust the left and right sound channel volume.
ページ19に含まれる内容の要旨
Convenience functions Icon Selected Items Setup hint Setup Language English / Français / Español You can choose from three different languages (English, Français (French) and Español (Spanish)) for the on-screen displays. Select the language you prefer first, then proceed with the other menu options. OSD Timeout 5 / 15 / 30 / 45 / 60 Sec. You can set the display time of OSD Menu. Closed Caption See page 23. Over Scan To adjust the size of the display by removing excess or unattractive when s
ページ20に含まれる内容の要旨
receive a list based on your address or zip code. Channel setup Should you require further assistance you may call our toll-free customer service line at 1-800-289-0980. This TV is equipped with a channel memory • New digital channels may be added to your area feature which allows channels to skip up or down periodically, it is recommended to perform the to the next channel set into memory, skipping “Automatic Search” procedure regularly. over unwanted channels. Before selecting channels
