ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Contents Features ............................................................................................ 2 Timeshift Recording ........................................................................ 16 Dear SHARP customer ...................................................................... 2 Instant Recording ............................................................................ 16 Introduction ......................................................................................
ページ3に含まれる内容の要旨
• Headphone connection. • Automatic programming system. • Forward or backward manual tuning. • Sleep timer / Child lock. • Automatic sound mute when no transmission. • NTSC playback. • AVL (Automatic Volume Limiting). • Auto power down. SPECIAL NOTE FOR USERS IN THE U.K. • PLL (Frequency Search). The mains lead of this product is fitted with a non-rewireable (moulded) • PC input. plug incorporating a 5A fuse. Should the fuse need to be replaced, a • Plug&Play for Windows 98, ME, 2000, XP, Vi
ページ4に含まれる内容の要旨
Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV. • Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
ページ5に含まれる内容の要旨
• Do not try to recharge batteries, there is a danger of explosion. Safety Precautions Replace batteries only with the same or equivalent type. Read the following recommended safety precautions carefully This symbol on the product or on its packaging means that your for your safety. electrical and electronic device should be disposed at the Power Source end of its service life separately from your household wastes. There are separate collection systems for recycling The TV set should be op
ページ6に含まれる内容の要旨
• The “HD TV 1080p” Logo is a trademark of EICTA. Environmental Information • This television is designed to consume less energy to save • The DVB logo is the registered trademark of the environment. Digital Video Broadcasting—DVB—project. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take Electrical device not in the hands of children the fol
ページ7に含まれる内容の要旨
Remote Control Buttons 1. Standby 2. Image size / Zooms videos (in Media Browser video mode) 3. Sleep Timer 4. Mono / Stereo - Dual I-II / Currrent Language (*) (in DVB channels) 5. Favourite Mode Selection (in DVB channels) 6. Numeric buttons 7. Electronic programme guide (in DVB channels) 8. No function 9. Media Browser 10. Navigation buttons (Up/Down/Left/Right) 11. No function 12. Recordings Library 13. Programme Down / Page up - Programme Up / Page down 14. Mute 15. Programme record
ページ8に含まれる内容の要旨
LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. Viewing the Connections - Back Connectors 1. HDMI 2: HDMI Input 2. HDMI 1: HDMI Input HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of displaying High Definition pictures from devices such as a High Defin
ページ9に含まれる内容の要旨
Viewing the Connections - Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section. 2. USB Inputs. Note that programme recording feature is available via these USB inputs. You can connect external hard disk drives to this input. 3. Video Input is used for connecting video signals of external devices.Connect the video cable between the VIDEO IN socket on the TV and
ページ10に含まれる内容の要旨
• Quickly plugging and unplugging USB devices, is a very hazardous • When you connect to DVD player as illustrated above, switch to the operation. Especially, do not repeatedly quickly plug and unplug connected HDMI source. See, Input Selection section for more the drive. This may cause physical damage to the USB player and information on changing sources. especially the USB device itself. Connecting to a DVD Player via Component • Do not pull out USB module while playing or recording a file
ページ11に含まれる内容の要旨
Note: If you switch on your TV via CH / CH buttons on the remote Connecting the LCD TV to a PC control or on the TV set, the programme that you were watching last For displaying your computer’s screen image on your LCD TV, you will be reselected. can connect your computer to the TV set. Power off both computer By either method the TV will switch on. and display before making any connections. Use 15-pin D-sub display To Switch the TV to Standby cable to connect a PC to the LCD TV. When the c
ページ12に含まれる内容の要旨
Programme Selection (Previous or Next Programme) • Press “CH ” button to select the previous programme. • Press “CH ” button to select the next programme. Programme Selection (Direct Access) • Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between, press the numeric buttons consecutively. When the pressing time is due for the second numeric button, only the first digit programme will be dis
ページ13に含まれる内容の要旨
To cancel an already set reminder, highlight that programme and press the OK button. Then select “Delete Timer” option. The timer will be cancelled. Note: It is not possible to record or set timer for two or more individual events at the same time interval. First Time Installation IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation. • When the TV is operated for the first time, installation wizard will guide you through the process. Firs
ページ14に含まれる内容の要旨
Analogue Manual Search Installation Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button. Press OK button and the following menu screen will be displayed. After selecting search type as analogue, you can use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option. Enter the channel number or frequency using the numeric buttons. You Select Automatic Channel Scan (Retune) by using “ ”/“ ” button can then press OK button
ページ15に含まれる内容の要旨
Operating the Channel List • Select a channel by using “ ” or “ ” button. Press OK button to add selected channel to favourites list. Press OK button again to • Press “ ” or “ ” button to select the channel that will be processed. remove. Press “ ” or “ ” button to select a function on Channel List menu. Button Functions • Use CH /CH buttons to move page up or down. • OK: Add/remove a station. • Press BLUE button to view filtering options. • YELLOW: Tag/untag a channel. • Press “MENU” button
ページ16に含まれる内容の要旨
Media Playback Using Media Browser If the USB stick is not recognized after power off/on or First Time Installation, first, plug the USB device out and power off/on the TV set. Plug the USB device in again. To display Media Browser window, press either “MENU” button on the remote control and then select Media Browser by pressing “ ” or “ Yellow: Opens subtitle time correction menu ” button. Press OK button to continue. Media Browser menu options will be displayed. Also, when you plug USB de
ページ17に含まれる内容の要旨
Media Browser Settings Up/Down: Navigate. You can set your Media Browser preferences by using the Settings Play ( button): Plays all media files starting with the selected one. dialog. Press “ ” or “ ” button to highlight an item and use “ ” or “ Stop ( button): Stops playback. ” button to set. Pause ( button): Pauses the selected playback. View Style: Sets default browsing mode. RED: Sorts files by Title,Artist or Album. Music FF/FR Speed: Sets forwarding/advancing speed. Loop/Shuffle (GREEN
ページ18に含まれる内容の要旨
Changing Image Size: Picture Formats • You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. • Press “SCREEN” button repeatedly to change the image size. Available zoom modes are listed below. Auto Press (STOP) button to cancel instant recording. The following OSD When AUTO is selected, the aspect ratio of the screen is adjusted by will be displayed: the information provided by the selected source (if available). The format being displayed i
ページ19に含まれる内容の要旨
Colour Shift: Adjust the desired colour tone. 4:3 Colour Temp: Sets the desired colour tone. Use to view a normal picture (4:3 aspect ratio) as this is its original size. Setting Cool option gives white colours a slight blue stress. For normal colours, select Normal option. Setting Warm option gives white colours a slight red stress. Noise Reduction: If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Noise Reduction can be set to
ページ20に含まれる内容の要旨
Configuring Sound Settings Configuring Y our TV’ s Settings Sound settings can be configured according to your personal Detailed settings can be configured to suit your personal preferences. preferences. Press “MENU” button and select the first icon by using “ ” or “ ” Press “MENU” button and select Settings ikon by using “ ” or “ ” button. Press OK button to view Sound Settings menu. button. Press OK button to view Settings menu. Operating Settings Menu Items Operating Sound Settings Menu It
