ページ1に含まれる内容の要旨
®
®
Aussie
b by y M Me ec co o
TM
ULURU LP Gas Grill Elite
Assembly and Use Manual
MODELS: 8452-5-SS1 Liquid Propane
8452-5-SL1 Liquid Propane MODEL 8452-5-S11 Liquid Propane
FOR OUTDOOR HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE.
For Customer Service, call 1-800-251-7558 or visit our web site at www.meco.net
• Failure to follow these instructions could result in fire or explosion which could cause death,
serious personal injury, or property damage.
• Read and follow instructions carefully be
ページ2に含まれる内容の要旨
CONTENTS I. ASSEMBLY INSTRUCTIONS............................................2 1) Connecting LP Gas Cylinder...................................14 2) Dis-connecting LP Gas Cylinder.............................14 A) Parts Illustrations...........................................................3 III. Operating and Maintaining Your LP Gas Grill.,................14 B) Parts List.......................................................................4 A) Before Using Your Grill.......................
ページ3に含まれる内容の要旨
PARTS ILLUSTRATIONS If you need replacement parts, refer to the Parts Illustrations and the Parts List to find the exact parts you need. If you have any questions which require help, contact Customer Service and be sure to mention the model number of your grill. (7) M6 x 15 (8) M6 NUT SCREW (2) SILVER BACK PANEL (3) BLACK BACK PANEL (4) LP CYLINDER CLAMP (5) BOTTOM PANEL (1) OWNERS MANUAL SILVER (6) BOTTOM PANEL BLACK (9) BOTTOM PANEL BRACE SILVER (10) BOTTOM PANEL BRACE BLACK (17) M6 x 20 S
ページ4に含まれる内容の要旨
PARTS ILLUSTRATIONS (Cont’d) (51) FOIL PAN (52) GREASE PAN (53) DRIP TRAY (54) FLAME DIFFUSER (55) COOKING GRID (60) HEAT INDICATOR (56) WARMING RACK (58) IGNITION BOX SHIM (59) LP HOSE AND REGULATOR (57) IGNITION BOX (61) IGNITOR SWITCH (63) MANIFOLD ASSEMBLY (LP) (62) ELECTRODE MAIN BURNER PARTS LIST ITEM DESCRIPTION PART # QTY. 1 Owner's Manual 03.6538.00 1 2 Back Panel-Silver 03.6508.00 1 3 Back Panel-Black 03.6508.01 1 4 LP Cylinder Clamp 03.6510.00 1 5 Bottom Panel-Silver 03.6511.00 1 6 B
ページ5に含まれる内容の要旨
PARTS LIST (Cont'd) 31 Bowl Assembly SS/Black 03.6523.00 1 32 Hood Assembly 430 SS/Silver 03.6524.00 1 33 Hood Assembly 430 SS/Black 03.6524.01 1 34 Spring Pin, Hood Hinge 03.6525.00 2 35 Clevis Pin, Hood Hinge 03.6526.00 2 36 Side Table, Left Burner SS/Silver 03.6527.00 1 37 Side Table, Left Burner SS/Black 03.6527.01 1 38 Screw, M4x15mm (Side Table Front) 03.6528.00 4 39 Side Table, Right SS/Silver 03.6529.00 1 40 Side Table, Right SS/Black 03.6529.01 1 41 Valve, Side Burner 03.6530.00 1 42 Sc
ページ6に含まれる内容の要旨
STEP 2) Cart Sides and Bottom Assembly: Lay Back Panel (2/3) on floor. (FIG. 2) Place Bottom Panel (5/6) against Back Panel edge and align the holes. (FIG. 2) Install two M6x15 Bolts (7) through the holes and secure with two M6 Nuts (8). Attach Bottom Panel Brace (9/10) to Bottom Panel (5/6) with two M6x15 Bolts and M6 Nuts. Attach Back Panel Brace (11/12) to Back Panel (2/3) with two M6x15 Bolts and M6 Nuts. Secure Bottom Panel Brace and and Back Panel Brace with one ST4.0 x10mm Screw (13). At
ページ7に含まれる内容の要旨
STEP 4) CASTER ASSEMBLY: Lay cart on the floor with Back Panel side down. Assemble Fixed Casters (23) to the LEFT Side of Bottom Panel and Swivel Lock Casters (24) to the RIGHT Side of Bottom Panel. Insert eight M6x15 Bolts (7) through the caster bracket holes into the threaded holes in the Bottom Panel. (FIG. 4A & 4B) Tighten the screws. Push the lever on the Swivel Lock Caster to lock so the caster wheel does not roll. (FIG. 4C) Set cart assembly up on the the floor. (7) M6 x 15 BOLT (23) FIXE
ページ8に含まれる内容の要旨
To reduce the risk of injury from lifting: The following assembly will require 2-people. STEP 6) HOOD/BOWL TO CART ASSEMBLY: Lift the Hood/Bowl Assembly (30) over the cart assembly and set it down until it rests on the inside top flanges of the cart. (FIG. 6A) Align the holes in the side of the Hood/Bowl with the holes in the cart brackets. Insert eight M6x15 (7) Bolts through the holes and tighten after all are installed. (FIG. 6B) Align the flat keyed hole in the Control Knob (47) with the key
ページ9に含まれる内容の要旨
To reduce the risk of an injury: The following assembly will require 2-people. STEP 7) BURNER SIDE TABLE ASSEMBLY: Align the four holes of the LEFT Side Burner Table (36/37) bracket with the threaded inserts in the side of the Bowl. Insert four M6x15 Bolts (7) into the holes and screw them in with a screwdriver, but do not tighten. (Fig. 7A & 7B). Install an M4 x15 Screw (38) at the front of the side Table. Repeat this assembly on the other side of the grill for the RIGHT Side Table (30). Tighte
ページ10に含まれる内容の要旨
STEP 9) SIDE BURNER ASSEMBLY: Insert the Side Burner (44) and the Electrode Wire through the front of the large hole in the Side Table. (FIG. 9A) Install the burner tube end over the valve nozzle. (FIG. 9B) Secure the Burner to the bracket with two M4x8mm Screws (45). (FIG. 9B) Pass the Electrode Wire through the opening at the top left corner of Side Panel for later connection to Ignition Box. (See also Wiring the Ignition Box.) (44) SIDE BURNER- (46) ELECTRODE WIRE (45) M4 X 8MM BURNER TUBE E
ページ11に含まれる内容の要旨
STEP 11) BURNER REMOVAL/RE-ASSEMBLY: The Burners (49) are already installed in the grill. There is some (49) MAIN BURNER cardboard packing underneath each burner; it will burn off the first time of use. If you wish to remove it: 1. Remove the burner pin. (FIG. 11A) 2. Lift the burner upwards. (FIG. 11B) 3. Gently pull the burner mouth away from the valve injector. (FIG. 11C) (50) MAIN BURNER PIN 4. Lift the burner out and remove the cardboard packing. (FIG. 11D) FIG. 11A FIG. 11B View from insi
ページ12に含まれる内容の要旨
STEP 13) FLAME DIFFUSER/GRID/ WARMING RACK ASSEMBLY: Lay a Flame Diffuser (54) over each Burner on the lower Body ridges from front to back. Place each Flame Diffuser in the individual guides to keep from sliding. (FIG. 13A) (54) FLAME DIFFUSER Place the Cooking Grids (55) over the Burner Diffusers on the (55) COOKING GRID upper Body ridges. (FIG. 13B) Insert the ends of the Warming Rack (56) into the V-shape hangers at each end of the hood. (Fig. 13C) (56) WARMING RACK V-SHAPE HANGER Fig. 13A F
ページ13に含まれる内容の要旨
CONNECTING/DISCONNECTING THE GAS USING GAS · When grill is not in use, turn off all grill control knobs, LP cylinder valve and disconnect LP cylinder. · Never fill the LP gas cylinder more than 80% of cylinder volume. (20 lb. maximum) Do not ask the CARBON MONOXIDE HAZARD propane supplier to over-fill the cylinder. · This appliance can produce carbon monoxide which · If you obtain LP gas through a cylinder exchange has no odor. Using it in an enclosed space can kill you. dealer, make sure
ページ14に含まれる内容の要旨
· If an external electrical source is utilized, the outdoor Connecting the LP Cylinder: cooking appliance, when installed, must be electrically grounded in accordance with local codes or, in the 1) Fill empty OPD LP Cylinder at your local LP gas absence of local codes, with the National Electrical supplier. Codes, ANSI/NFPA 70, or the Canadian Electrical Code 2) Lift up LP Cylinder Clamp and set LP Cylinder in the CSA C22.1. Large hole inside the Bottom Panel. Lower the clamp · Keep any
ページ15に含まれる内容の要旨
10) Place the protective cap over LP cylinder gas How to perform a leak test: nozzle. Supplies Needed for a Leak Test: Clean paint 11) Attach the wire leads to the Ignitor button and brush, water, and dish washing liquid. Replace control panel with the three screws 1) Use an LP Cylinder equipped with an OPD After completing Leak Test, you are ready to (Overfill Prevention Device) and have it filled at begin using your grill! an authorized LP gas dealer by a qualified attendant. 2) Make sur
ページ16に含まれる内容の要旨
LIGHTING THE GRILL USING THE PULSE-SPARK IGNITOR Control Knob in OFF position To reduce the risk of serious bodily injury or death: · Open Hood before lighting the grill to prevent an explosion from gas build-up. · During failed lighting attempts, or if the burners go out during operation, turn control knobs “Off” to dissipate any accumulation of gas. Wait five minutes before FIG. 17B repeating lighting procedure. 1. Open the Hood. 2. Important: Make sure control knobs are turned “Off”.
ページ17に含まれる内容の要旨
LIGHTING THE SIDE BURNER MANUAL LIGHTING THE GRILL To reduce the risk of serious bodily injury or death: To reduce the risk of serious bodily injury or death: · Open Side Burner Lid before lighting the grill to prevent · Open Hood before lighting the grill to prevent an an explosion from gas build-up. explosion from gas build-up. 1. Open the side burner lid. (FIG. 18C) 1. Open the Hood. 2. Important: Make sure Side Burner Control Knob is 2. Important: Make sure control knobs are turned “Of
ページ18に含まれる内容の要旨
MANUAL LIGHTING THE SIDE BURNER Cooking on Griddle Plates allow cooking of smaller items that otherwise, would fall through the grill. The burners heat the Griddle Plate directly, which cooks the food on contact. The Plates sear cuts of meat or cook food like eggs that can not To reduce the risk of serious bodily injury or death: be cooked on a grill. They can also be used to heat pans. · Open Side Burner Lid before lighting the grill to prevent an explosion from gas build-up. CAUTION · When
ページ19に含まれる内容の要旨
1) After each cooking session, close the hood and turn the · Do not attempt to extinguish a grease fire with water grill burners to the “High” position and burn for five or other liquids. Have an BC fire extinguisher minutes. This will burn off some cooking residue, thus accessible. Do not douse or spray the grill or cooking making cleaning easier. (Side Burner not affected.) surfaces with water when hot. Burns from grease or 2) When you have finished using your grill, turn the grill the wa
ページ20に含まれる内容の要旨
To reduce the risk of a fire beneath the grill: · Inspect and clean burner/venturi tubes for insects and insect nests. · Be sure burners are re-installed properly before using grill. G) Check the side burner electrode to see if it is loose. If so, How to Clean the Burners: tighten the screw holding the electrode to maintain 3/16” A) Make sure the LP cylinder grill control knobs are turned gap between electrode tip and side burner. Note: Before OFF; and the grill is completely cooled. next
