ページ1に含まれる内容の要旨
Samsung
SRD Series
Installation
Guide
EOS Australia PTY LTD
ページ2に含まれる内容の要旨
Samsung SRD Series EOS Australia PTY LTD by Andrew Vo-Nguyen This guide is designed for installers as a quick guide and a checklist of what should be configured on a DVR on installation. It goes through the most important topics to ensure all configurations meet the end user's expectations and performs at it's maximum capacity.
ページ3に含まれる内容の要旨
Contents 3 Table of Contents 5 Part I DVR Configuration 1 Namin.g .. .C ..a ..m ...e ..r.a ..s ................................................................................................................... 5 2 Date &. .T ..i.m ...e ........................................................................................................................... 6 3 User M.a ..n ..a ..g ..e ..m ...e ..n ..t..............................................................................................
ページ4に含まれる内容の要旨
Part I
ページ5に含まれる内容の要旨
DVR Configuration 5 1 DVR Configuration The following DVR configurations should be checked and configured on installation of any DVR onto any site. Settings may vary depending on how the customer wants the DVR configured. 1.1 Naming Cameras Go to [Menu] > [Device] > [Cameras]. Double click each camera to change the name. EOS Australia PTY LTD
ページ6に含まれる内容の要旨
6 Samsung SRD Series Installation Guide 1.2 Date & Time Go to [Menu] > [System] > [Date/Time/Language] Time and Date should always be checked to ensure all recordings are synchronized with real time. If your DVR is connected to the internet you can Sync to a Time Server online. EOS Australia PTY LTD
ページ7に含まれる内容の要旨
DVR Configuration 7 1.3 User Management Go to [Menu] > [System] > [Permission Management] The default 'admin' password is '4321'. This can be changed as a master password or installer password. It is a good idea to keep the 'admin' password for the installer only, and create users for the end user. Only 1 admin user can be logged in locally or remotely into the DVR at any given time. Create extra users for simultaneous logins. EOS Australia PTY LTD
ページ8に含まれる内容の要旨
8 Samsung SRD Series Installation Guide You must 'Add' a group with permission policies before adding a 'User'. This is fond under the [Group] tab. Once a group as been added, go to the [User] tab to add a user. EOS Australia PTY LTD
ページ9に含まれる内容の要旨
DVR Configuration 9 1.4 Harddrive Management Go to [Menu] > [Device] > [Storage Device] Go to the [Format] tab to view how much storage is used on each Harddrive. Also check the status of any CD/DVD or USB device. EOS Australia PTY LTD
ページ10に含まれる内容の要旨
Part II
ページ11に含まれる内容の要旨
Recording Configiration 11 2 Recording Configiration The following recording configurations should be checked and configured on installation of any DVR onto any site. Settings may vary depending on how the customer wants the DVR configured. 2.1 Recording Schedule Go to [Menu] > [Record] > [Recording Schedule] Right click anywhere on the table to select your Recording Type (No Recording / Continuous , Event, Both). Left click and drag anywhere on the table to change the schedule to your selected
ページ12に含まれる内容の要旨
12 Samsung SRD Series Installation Guide Below are the Recording Type colour codes for the Recording Schedule. The below Recording Schedule is only for Camera 1, press 'Apply to All CH' to apply to all channels. EOS Australia PTY LTD
ページ13に含まれる内容の要旨
Recording Configiration 13 2.2 Event Record Duration Go to [Menu] > [Record] > [Event Record Duration] Configure the buffer time before and after a motion event occurs. EOS Australia PTY LTD
ページ14に含まれる内容の要旨
14 Samsung SRD Series Installation Guide 2.3 Recording Quality & Resolution Go to [Menu] > [Record] > [REC Quality & Resolution] There are 2 tabs at the top, [Standard] tab relates to Continuous recording and [Event] tab relates to Motion recording. Depending on which DVR you have, the Frame rates and Resolutions may vary. EOS Australia PTY LTD
ページ15に含まれる内容の要旨
Recording Configiration 15 2.4 Motion Recording Go to [Menu] > [Event] > [Motion Detection] In order for your DVR to detect Motion as an Event, make sure 'Mode' is set to 'ON' for each channel (See below). Also click on 'Motion Region' to mask and exclude particular areas from Motion Detection. EOS Australia PTY LTD
ページ16に含まれる内容の要旨
Part III
ページ17に含まれる内容の要旨
Network Configuration 17 3 Network Configuration 3.1 IP Settings Go to [Menu] > [Network] > [Connection Mode] Under the [Connection] tab, fill out the network details Connection Mode: Select 'Static IP' to enter the DVR's local IP Address. Bandwidth: This is the maximum bandwidth the DVR can throughput. IP: The Local IP address of the DVR. Gateway: The Router's IP Address (only used for accessing the internet). Subnet Mask: The Subnet Mask of the network. DNS: The DNS address of a DNS Server on
ページ18に含まれる内容の要旨
18 Samsung SRD Series Installation Guide 3.2 Port Numbers Go to [Menu] > [Network] > [Connection Mode] > [Protocol] tab The default ports for an SRD DVR are: TCP: 554, 555, 556, 557 iPhone: 558 (Is always the last port number in the sequence) Webviewer Port: 80 EOS Australia PTY LTD
ページ19に含まれる内容の要旨
Network Configuration 19 3.3 Live Transfer Go to [Menu] > [Network] > [Live Transfer] The SRD Series DVR has the ability to stream a different Resolution and Quality over the network. This ensures that the network stream can stream quicker rather than streaming the Recording resolution. EOS Australia PTY LTD
ページ20に含まれる内容の要旨
20 Samsung SRD Series Installation Guide 3.4 Smart Phone Connection The Samsung SRD Series is compatible with iPhone, iPad and all Android devices. The iPolis Mobile app gives you the ability to View your cameras live, Playback your cameras, and also Control the Pan Tilt Zoom function. Search for keyword 'iPolis' in the App Store or Android Market, or run a QR Scan on below codes. Download iPolis for iPhone Download iPolis for Android Once downloading the app and installing it, you will need to
