ページ1に含まれる内容の要旨
User Manual
EURORACK
UB1204 -PRO
Ultra-Low Noise Design 12-Input 2/2-Bus Mixer with Premium Mic Preamplifiers and Multi-FX Processor
UB1204-PRO
Ultra-Low Noise Design 12-Input 2/2-Bus Mic/Line Mixer with Premium Mic Preamplifiers
ページ2に含まれる内容の要旨
2 EURORACK UB1204FX-PRO/UB1204-PRO User Manual Table of Contents Thank you ....................................................................... 2 Important Safety Instructions ...................................... 3 Legal Disclaimer ............................................................. 3 Limited Warranty ........................................................... 3 1. Introduction ............................................................... 5 1.1 General mixing console functions
ページ3に含まれる内容の要旨
3 EURORACK UB1204FX-PRO/UB1204-PRO User Manual 9. Do not defeat the safety purpose of the polarized UNDERTAKING OR REPRESENTATION. THIS MANUAL Important Safety or grounding-type plug. A polarized plug has two blades IS COPYRIGHTED. NO PART OF THIS MANUAL MAY Instructions with one wider than the other. A grounding-type plug BE REPRODUCED OR TRANSMITTED IN ANY FORM has two blades and a third grounding prong. The wide OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, blade or the third prong are prov
ページ4に含まれる内容の要旨
4 EURORACK UB1204FX-PRO/UB1204-PRO User Manual “Support” at behringer. com. If your country is not • connection or operation of the unit in any way (3) This warranty does not detract from the seller’s listed, please check if your problem can be dealt with that does not comply with the technical or safety obligations in regard to any lack of conformity of the by our “Online Support” which may also be found under regulations applicable in the country where the product and any hidden defect. “Su
ページ5に含まれる内容の要旨
5 EURORACK UB1204FX-PRO/UB1204-PRO User Manual 1. Introduction 1.2 The user’s manual The BEHRINGER EURORACK mixing console offers you premium-quality The user’s manual is designed to give you both an overview of the controls, microphone preamplifiers with optional phantom power supply, balanced line as well as detailed information on how to use them. In order to help you inputs and the ability to connect external effects devices. Because of its extensive understand the links between the cont
ページ6に含まれる内容の要旨
6 EURORACK UB1204FX-PRO/UB1204-PRO User Manual 2. Control Elements and Connectors 2.1.2 Equalizer This chapter describes the various control elements of your mixing console. All controls, switches and connectors will be discussed in detail. 2.1 Mono channels 2.1.1 Microphone and line inputs Fig. 2.2: The equalizer of the input channels All mono input channels include a 3-band equalizer. All bands provide boost or cut of up to 15 dB. In the central position, the equalizer is inactive. The u
ページ7に含まれる内容の要旨
7 EURORACK UB1204FX-PRO/UB1204-PRO User Manual PRE SOLO When the PRE switch is pressed, aux send 1 is sourced pre-fader. The SOLO switch (UB1204FX-PRO only) is used to route the channel signal to the solo bus (Solo In Place) or to the PFL bus (Pre Fader Listen). This enables you to AUX 2 (FX) monitor a channel signal without affecting the main output signal. The signal you hear is sourced either before (PFL, mono) or after (solo, stereo) both the pan The aux send labeled FX is for sending to
ページ8に含まれる内容の要旨
8 EURORACK UB1204FX-PRO/UB1204-PRO User Manual 2.3 Connector panel and main section AUX SEND 2 Whereas it was useful to trace the signal flow from top to bottom in order to gain The AUX SEND 2 connector outputs the signal you picked up from the individual an understanding of the channel strips, we now look at the mixing console from channels using the FX control. You can connect this to the input of an effects left to right. The signals are, so to speak, collected from the same point on each
ページ9に含まれる内容の要旨
9 EURORACK UB1204FX-PRO/UB1204-PRO User Manual STEREO AUX RETURN MON 2.3.6 Level meter and monitoring The STEREO AUX RETURN MON control has a special function: it can be used to add an effect to a monitor mix. For example: Monitor mix with effect In this instance, the effects device should be set up as follows: AUX SEND 2 is connected to the L/Mono input of your effects device, while its outputs are connected to STEREO AUX RETURN 1. Connect the amplifier of your monitor system to AUX SEND 1
ページ10に含まれる内容の要旨
10 EURORACK UB1204FX-PRO/UB1204-PRO User Manual LEVEL METER PFL (UB1204FX-PRO only) The high-precision level meter accurately displays the appropriate signal level. The PFL LED indicates that the peak meter is set to PFL mode. LEVEL SETTING: PHONES When recording to a digital device, the recorder’s peak meter should not exceed You can connect headphones to this 1/4" TRS connector. The signal on the PHONES 0 dB. This is because, unlike analog recordings, slightly excessive levels can create con
ページ11に含まれる内容の要旨
11 EURORACK UB1204FX-PRO/UB1204-PRO User Manual ALT 3-4 OUTPUTS 3. Digital Effects Processor The ALT 3-4 outputs are unbalanced and carry the signals of the channels that you have assigned to this group using the MUTE switch. This can be used to route a subgroup to a further mixing console for example, or or it could be used as a recording output working in tandem with the main output. This means you could record to four tracks simultaneously. The icing on the cake, so to speak, is that yo
ページ12に含まれる内容の要旨
12 EURORACK UB1204FX-PRO/UB1204-PRO User Manual 4. Installation 4.2.1 Audio connections Please use commercial RCA cables to wire the 2-track inputs and outputs. 4.1 Rack mounting You can, of course, also connect unbalanced devices to the balanced The packaging of your mixing console contains two 19" rack mount wings which input/outputs. Use either mono plugs, or ensure that ring and sleeve are bridged can be installed on the side panels of the console. inside the stereo plug (or pins 1 & 3
ページ13に含まれる内容の要旨
13 EURORACK UB1204FX-PRO/UB1204-PRO User Manual 5. Specifications Balanced ¼" TRS connector strain relief clamp Mono Inputs sleeve ring Microphone Inputs (IMP “Invisible” Mic Preamp) tip Type XLR, electronically balanced, discrete input circuit sleeve Mic E.I.N. (20 Hz - 20 kHz) ground/shield @ 0 Ω source resistance -134 dB / 135.7 dB A-weighted ring cold (-ve) @ 50 Ω source resistance -131 dB / 133.3 dB A-weighted tip hot (+ve) @ 150 Ω source resistance -129 dB / 130.5 dB A-weighted For conn
ページ14に含まれる内容の要旨
14 EURORACK UB1204FX-PRO/UB1204-PRO User Manual 2 EQ Mono Channels Main Mix System Data Low 80 Hz / ±15 dB Noise Mid 2.5 kHz / ±15 dB Main mix @ -∞, -105 dB / -108 dB A-weighted Channel fader @ -∞ High 12 kHz / ±15 dB Main mix @ 0 dB, -95 dB / -97 dB A-weighted EQ Stereo Channels Channel fader @ -∞ Main mix @ 0 dB, -82.5 dB / -85 dB A-weighted Low 80 Hz / ±15 dB Channel fader @ 0 dB Mid 2.5 kHz / ±15 dB Power Supply High 12 kHz / ±15 dB Mains voltage 100 to 240 V~, 50/60 Hz Aux Sends Po
ページ15に含まれる内容の要旨
15 EURORACK UB1204FX-PRO/UB1204-PRO User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EURORACK UB1204FX-PRO/UB1204-PRO Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.: Phone: +1 425 672 0816 Fax: +1 425 673 7647 EURORACK UB1204FX-PRO/UB1204-PRO complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for
ページ16に含まれる内容の要旨
We Hear You