ATEN Technology UE-250の取扱説明書

ページ1に含まれる内容の要旨

Installation specifications
Installation is simply a matter of plugging in the cables:
Function Specification
1. Plug the UE-250 USB cable into the computer’s USB
port or a USB hub. Power Supply Bus Powered
2. Plug the USB peripheral into the UE-250 socket. Cable length (output) 5 m (16ft.)
That’s all there is to it.
Connectors 1 Type A Male
1 Type A Female
USB Specification 2.0 spec. for high, full and low
Driver Support Native Driver Support
Operating Temperature 5° - 40° C
1
Storage Temperat

ページ2に含まれる内容の要旨

Overview Components The UE-250 USB Repeater Cable allows you to extend 1 the distance between your computer and your USB peripherals by 5 meters (16’). Unlike typical cables, the 2 UE-250 is an active extension cable. All USB signals NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device transmitted through it are regenerated to maintain optimal pursuant to Subpart J of Part 15 of FCC Rules. These signal integrity to meet the USB 2.0 specification.