ページ1に含まれる内容の要旨
USER GUIDE
USB 2.0 FAST ETHERNET ADAPTER CABLE
Model: 39998
1
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Introduction......................................................................................................................................................2 Features...........................................................................................................................................................3 System Requirements.................................................................................................................................
ページ3に含まれる内容の要旨
INTRODUCTION Thank you for purchasing the USB 2.0 Fast Ethernet Adapter Cable from Cables To Go. With its 480 Mbps of available bandwidth, you get true 10/100 network access. The plug-and-play design makes this adapter the most convenient and efficient way to connect a laptop or desktop computer to a fast ethernet network. With our fast ethernet adapter, you can experience the full speed of your fast ethernet network without the need for opening your PC and adding internal network adapte
ページ4に含まれる内容の要旨
FEATURES IEEE 802.3u 100 BASE-T, TX compatible Supports full duplex or half duplex mode Supports suspended mode and remote wakeup Compliant with the standard specification of USB 1.1 and 2.0 3
ページ5に含まれる内容の要旨
SYSTEM REQUIREMENTS A USB-enabled PC USB 2.0 host controller Windows® 98/98SE/ME/2000/XP/Vista/Windows 7 4
ページ6に含まれる内容の要旨
PACKAGE CONTENTS (1) USB 2.0 Fast Ethernet Adapter Cable Installation CD User Guide 5
ページ7に含まれる内容の要旨
SOFTWARE/DEVICE INSTALLATION-WIN 2000, XP, VISTA, WIN 7 Step 1 Insert the CD into your CD-ROM. A menu should appear. Click the “39998-USB 2.0 Fast Ethernet” button and then on the next menu, click the button that represents your current operating system. This will begin the AX88772 Windows Driver Setup Program. The following is an example of AX88772 WinXP/2K driver setup program for users’ reference. Step 2 The setup program will auto-install AX88772 WinXP/2K driver
ページ8に含まれる内容の要旨
SOFTWARE/DEVICE INSTALLATION-WIN 2000, XP, VISTA, WIN 7 Step 3 Plug the USB 2.0 Fast Ethernet Adapter into a USB port. Windows will recognize the adapter and you are now ready to use it by plugging in your network cable to the RJ45 female port. The adapter will be labeled as a Local Area Connection (or something similar) in your Network Connections folder. 7
ページ9に含まれる内容の要旨
SOFTWARE/DEVICE INSTALLATION-WIN 98 AND ME Step 1 Plug in the USB 2.0 Fast Ethernet Adapter into a USB port on your PC. Step 2 Windows 98/ME users will be asked to select a driver location. Check ONLY specify a location, and then type (or browse to) the following. (Substitute D: for the letter of your CD-ROM drive) Windows 98_ME\AX88772_772A_WinME98SE_v3.0.3.12 Step 3 Windows will find the driver it needs and install it. Continue to click Next to advance through the wizard, an
ページ10に含まれる内容の要旨
VERIFY INSTALLATION TO VERIFY SUCCESSFUL INSTALLATION IN WINDOWS 98SE/ME 1. From the main desktop, double-click My Computer; double-click Control Panel, System, and then Device Manager. 2. You should see a category called Network Adapters, and a device called Asix AX88772 USB to Fast Ethernet Adapter (or something similar). TO VERIFY SUCCESSFUL INSTALLATION IN WINDOWS 2000 1. From the main desktop, right-click My Computer; select Properties. Click the Hardware tab, then Device M
ページ11に含まれる内容の要旨
EXPLANATION OF LEDS The top of the USB 2.0 Fast Ethernet Adapter has a series of LED’s to provide you with at-a-glance diagnostic and status information. LINK/ACT – This is a yellow LED that when lit, tells you that you have a good connection to your network. If it is not lit, check your Ethernet cable. ACT100M – This tells you that you are connected to a 100BaseT (100 Mb/s) network. ACT10M – This tells you that you are connected to a 10BaseT (10 Mb/s) network.
ページ12に含まれる内容の要旨
UN-INSTALLATION Users can uninstall the AX88772 driver package from the following “Add or Remove Programs” dialog if necessary. 11
ページ13に含まれる内容の要旨
TROUBLESHOOTING Once installed, Windows will treat the adapter as it would any standard Ethernet connection. Use whatever tools, programs, or configurations you would normally use to utilize your computer on an Ethernet network. Cables To Go can only assist with questions or issues related to installing the adapter itself or the adapter drivers. For assistance with other issues, please consult the following list: - For questions about using your computer on the network, please util
ページ14に含まれる内容の要旨
TECHNICAL SPECIFICATIONS Product No. 39998 Complies USB Rev. 1.1 and 2.0 USB A Male Connectors RJ45 Female Housing Plastic 70mm x 38.7mm x Product Dimension 24.2mm Product Weight 0.20 lbs USB Cable Length 7.5 in. 13
ページ15に含まれる内容の要旨
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering Blv
ページ16に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product. ! In case of a storm, it
ページ17に含まれる内容の要旨
16
ページ18に含まれる内容の要旨
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 1.0.10.1.09 17
