ページ1に含まれる内容の要旨
<< Previous Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MG6120
Windows OS
1
ページ2に含まれる内容の要旨
<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MG6120 Windows OS Preparing to Connect My Multifunction To My Network 3 Connecting Your MG6120 To Your Network 5 Installing The MG6120 Software 12 2
ページ3に含まれる内容の要旨
Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. 3
ページ4に含まれる内容の要旨
Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or conta
ページ5に含まれる内容の要旨
Connecting Your MG6120 To Your Network << Previous Next >> Step 1 Step 2 Use the ↑ or ↓ button (A) to display Use the ← or → button (C) to select Setup, then touch the right Wireless LAN setup, then touch the FUNCTION button (B). OK button. 5
ページ6に含まれる内容の要旨
Connecting Your MG6120 To Your Network << Previous Next >> Step 3 Step 4 Select Yes, then touch the OK button. Select Easy setup, then touch the OK button. When wireless connection is enabled, the Wi-Fi lamp lights blue. 6
ページ7に含まれる内容の要旨
Connecting Your MG6120 To Your Network << Previous Next >> Step 5 Step 6 Select the access point name you Make sure that one of the below wrote down, then touch the OK screens is displayed, then touch the button. right FUNCTION button. If neither is displayed, go to Step 9. Note: • Nearby access points may be detected. • Access point names with 2-byte characters are not displayed properly, however, they can be selected. 7
ページ8に含まれる内容の要旨
Connecting Your MG6120 To Your Network << Previous Next >> Step 7 Enter the network key you wrote down on, then touch the left FUNCTION button (E). 1. Touch the center FUNCTION button (F) to switch character entry modes. 2. Enter upper and lower case letters of the alphabet correctly. 8
ページ9に含まれる内容の要旨
Connecting Your MG6120 To Your Network << Previous Next >> Step 7 (continued) Character Entry This machine allows you to enter characters when an on-screen keyboard is displayed. Follow the procedure below. 1. When the on-screen keyboard shown above is displayed, touch the center FUNCTION button (A) to switch to a keyboard having the characters you want to use. Four character sets are available: Upper-case alphabets, lower-case alphabets, numbers, and symbols. Each time you touch the cente
ページ10に含まれる内容の要旨
Connecting Your MG6120 To Your Network << Previous Next >> Step 7 (continued) Character Entry 2. Select a character on the on- screen keyboard using the ↑↓←→ buttons (B) then touch the OK button to enter it. Entered characters are displayed on the upper section (C) of the on-screen keyboard. • To insert a space, select Space on the on-screen keyboard and touch the 3. Repeat (1) and (2) to enter OK button. more characters. • To insert characters, select the section (C) of the screen usin
ページ11に含まれる内容の要旨
Connecting Your MG6120 To Your Network << Previous Next >> Step 8 Step 9 Make sure that the network key is When the screen below appears, correct, then touch the OK button. touch the OK button. Your MG6120 is now connected to your network Note: • If Failed to connect to the access point. appears, touch the OK button, make sure that the network key is correct, then enter it again. If a connection still cannot be established, refer to the printed manual: Network Setup Troubleshooting. 11
ページ12に含まれる内容の要旨
Installing The MG6120 Software << Previous Next >> Now that your MG6120 is connected to your network, we need to install the driver and the included software. Before we begin: • Log on as the administrator (or a member of the Administrators group). • Quit all running applications before installation. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set th
ページ13に含まれる内容の要旨
Installing The MG6120 Software << Previous Next >> Step 1 Step 2 Turn on the computer, then insert the Windows 7/Windows Vista. Setup CD-ROM into the CD-ROM For Windows XP, skip to Step 3. drive. If you are using Windows, the setup program starts automatically. Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. Note: If the program doe
ページ14に含まれる内容の要旨
Installing The MG6120 Software << Previous Next >> Step 3 Step 4 Click Easy Install Click Install The drivers, application software, and on-screen manuals are installed. Note: If you want to select particular items to install, click Custom Install. 14
ページ15に含まれる内容の要旨
Installing The MG6120 Software << Previous Next >> Step 5 Step 6 Select Use the printer on network, Select Next or Skip. then click Next. Selecting Next will download and install the Easy- WebPrint EX software. Easy-WebPrint EX is Web print software. Internet Explorer 7 or later is required to use this software. An Internet connection is required for installation. 15
ページ16に含まれる内容の要旨
Installing The MG6120 Software << Previous Next >> Step 7 Step 8 When the Printer Detection screen When the Detected Printers List appears, click Next. screen appears, select Canon MG6100 series, then click Next. IMPORTANT IF THE PRINTER CONNECTION SCREEN APPEARS INSTEAD OF THE SCREEN ABOVE, THE CONNECTION METHOD IS NOT CORRECTLY SELECTED IN 5. CLICK CANCEL AND START AGAIN FROM STEP 1, THEN BE SURE TO SELECT USE THE PRINTER ON NETWORK IN 5. 16
ページ17に含まれる内容の要旨
Installing The MG6120 Software << Previous Next >> Step 9 Step 10 Click Complete on the Setup Follow any on-screen instructions to Completion screen. proceed with the remaining software installation. Wireless setup is now complete 17
