ページ1に含まれる内容の要旨
BLU-RAY DISC & HDD RECORDER
INSTRUCTIONS
SR-HD2500US
HB DD RECD REC
OPEN/
CLOSE
STANDBY/ON REC INPUT MIDIA SELECT DIRECT/
RESET MODE SELECT HDD BD/SD MONITOR
STOP REV PLAY FWD PAUSE REC
HDV/DV IN
For Customer Use:
Enter below the Model No. and Serial
No. which are located on the rear of
cabinet. Retain this information for
future reference.
Model No.
Serial No.
.
LST1302-001A
2012/3/8 13:53:0
ページ2に含まれる内容の要旨
Safety Precaution Dear Customer, WARNING: Thank you for purchasing the JVC BLU-RAY DISC & HDD TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE recorder. Before use, please read the safety information and THIS UNIT TO RAIN OR MOISTURE. precautions to ensure safe use of your new unit. CAUTION: This unit should be used with AC 120VH, 60Hz only. Cautions To prevent electric shocks and fire hazards, DO NOT use any other power source. CAUTION: CAUTION AVIS TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
ページ3に含まれる内容の要旨
Safety Precaution CAUTION: IMPORTANT SAFETY INSTRUCTIONS Changes or modifications not approved by JVC could void user’s 1) Read these instructions. authority to operate the equipment. 2) Keep these instructions. 3) Heed all warnings. Declaration of Conformity 4) Follow all instructions. Model Number: SR-HD2500US 5) Do not use this apparatus near water. Trade Name: JVC 6) Clean only with dry cloth. Responsible Party: JVC Americas Corp. 7) Do not block any ventilation openings. Install in accorda
ページ4に含まれる内容の要旨
Safety Precaution DISCLAIMER OF LIABILITY JVC shall not be liable for any loss relating to the unit’s failure to properly record, store or playback any content (video, audio or otherwise) for any reason whatsoever. Any applicable warranties shall only cover replacement or repair of the effected unit, and shall not apply to recovery or replacement of lost content. ● Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ATTENTION:
ページ5に含まれる内容の要旨
Contents Playing Still Images (JPEG) ............................................ 58 Contents Changing Playback Settings ........................................... 59 Playback Settings Menu .................................................. 59 Audio/subtitle settings .................................................. 59 Safety Precaution Playback settings ......................................................... 59 Video settings .............................................................. 60
ページ6に含まれる内容の要旨
Getting Started Equipped with SDI output terminal Key Features You can connect this unit directly to an SDI system without using any converter or peripheral device. Professional Blu-ray Disc recorder of the high-definition era Supports direct recording to discs Copy videos to a Blu-ray Disc in high-definition from a high- You can record contents directly to an optical disc (BD-R/RE, definition camcorder, or down convert the videos and record them onto DVDs, all without the need for a PC. DVD-R/R
ページ7に含まれる内容の要旨
Getting Started Disclaimer of compensation for loss or Other Precautionary Notes damage of stored video content Please note that our company will not be liable for compensation Copyright protection of the content or any incidental damages in the event that dubbing or playback cannot be performed properly for some This unit supports copyright protection technologies. reasons. The same applies during repair of this unit. Copyrights Handling precautions v According to the copyright law, video or mu
ページ8に含まれる内容の要旨
Getting Started Hard Disk Drive (HDD) SD Cards Hard disk drive (HDD) Precautions for handling SD and SDHC cards The HDD rotates at a high speed whenever the power is turned “On”. Note: v Pay particular attention to the following precautions when The disc operation display icon appears blinking and using this unit. “READING” is displayed on the display window when the SD card is being accessed (such as during dubbing, playback, or Warning formatting). When access to the SD card is in progress, do
ページ9に含まれる内容の要旨
Getting Started m When using DVD-RW discs Discs Formatting is required. Format the disc using this unit. v Format using “VR MODE” or “VIDEO MODE”. BD recording formats m BDAV mode v Videos can be edited (chapter edit etc) and new videos can be added to the disc. This format is suitable for recording videos. v MPEG2 with HD quality will be recorded as it is onto the disc. This format has low playback compatibility, but performs well when used for backups. m BDMV mode v Compatible and playable on
ページ10に含まれる内容の要旨
Getting Started Discs (Continued) Discs that enable both dubbing and playback Disc Type Recording Format Format Finalize Repeated Use (Reformat) BD-RE BDAV mode V - V BDMV mode V - V BD-R BDAV mode V V - BDMV mode V - - DVD-RW Video mode V V V VR mode V V V DVD-R Video mode - V - VR mode V V - Discs that enable playback only Disc Type Description DVD-RAM (4.7 GB) Supports specific forms of playback, but no recording can be done. BD-ROM Commercially available Blu-ray discs (movies, music, etc.) T
ページ11に含まれる内容の要旨
Getting Started Disc storage Precautions on the Use of v Avoid storing the disc at the following locations. Discs v Places that are subject to high humidity, dust, or mold growth v Places that are exposed to direct sunlight or near a heater Maintenance of discs v Inside a car during summer v v Dirt attached to the disc, such as fingerprints and dust, may Do not drop the disc or subject it to strong impact. cause distortion in the video image or sound. v Place the disc in a case and store it vert
ページ12に含まれる内容の要旨
Getting Started SDI time code display On-screen Displays The time code is displayed during recording of SDI input signals. Status display You can specify whether to display the time code, and also where to display it. Displays the current settings and operating status (such as For details, refer to “TIME CODE INPUT SETTING” and playback, pause) of this unit. “TIME CODE DISPLAY POSITION” under “SDI Pressing the [ON SCREEN] button on the remote control CONNECTION”. displays the status. To cancel t
ページ13に含まれる内容の要旨
Getting Started Name and Function of Parts Front panel A B C D EFGHIJKLM N O P Q R . A [ A ] button N Playback control buttons v Turn On/Off the power. [ I ] button Plays back the data. B Disc tray v [ o ] button C [ M ] button Stops playback/recording. Opens/closes the disc tray. v [ O ] button D Display window Fast reverses playback. E Remote control sensor v [ N ] button F [RESET] switch Fast forwards playback. v Reset the unit. [ W ] button Pauses playback. G [REC MODE] button Switches the r
ページ14に含まれる内容の要旨
Getting Started Name and Function of Parts (Continued) Display window A B C D . A HDD/DISC remaining level display English messages appear for a number of operations. (Examples) B Dubbing display HELLO : When the power plug is inserted C Disc status display READING : When reading the disc D HDMI output display : ONSCREEN Upon moving to the playback navigation Memo: screen v The brightness of the display window can be adjusted. For more details, refer to “PANEL DISPLAY BRIGHTNESS” (A page 78) . R
ページ15に含まれる内容の要旨
Getting Started I [ J / K / H / I ] Remote control The cursor can be moved to select an item. J [OPTION] Displays the option screen. A T K [ S ] B U Move to the chapter just before the current chapter. C V L [ O ] W Fast reverses the video and starts slow playback. D M [ R ] Press the [ R ] and [ I ] buttons together to start recording. X N [REC MODE] E Y For checking the recording mode settings and amount of time Z F remaining. a G b O [ON SCREEN] c H Displays information on the screen. I P [PR
ページ16に含まれる内容の要旨
Getting Started Remote control codes Name and Function of By setting a remote control code for the unit and remote Parts (Continued) control, you can prevent two recorders from operating simultaneously using the remote control for this unit. e [RETURN] (the setting for the unit and remote control at time of purchase Returns to the previous screen without applying the selection is “REMOTE CONTROL 3”.) or entry. Memo: v f [ T ] Changing the remote control code for the remote control before the uni
ページ17に含まれる内容の要旨
Preparation Memo: v Connecting a Monitor After connecting a component video cable, change the unit setting to “COMPONENT OUTPUT”. To display video images from this unit, connect it to a monitor. For more details, refer to “COMPONENT OUTPUT” ( A page v This unit supports connections using “HDMI cable”, 85) . “component video cable”, “S-video cable”, or “video cable”. Memo: v Switch to the appropriate monitor input according to the Connecting using an S-video cable type of connection cable used. C
ページ18に含まれる内容の要旨
Preparation Connecting using an SDI cable (BNC) Connecting a Video Deck Connect using an SDI cable (sold separately). You can or Other Equipment transmit both digital video and audio signals with a single cable. Connecting a video camera m Connecting via the i.LINK terminal HDD REC BV REC REC INPUT MIDIA SELECT DIRECT/ MODE SELECT HDD BD/SD MONITOR HDV/DV IN . . Memo: v The SDI output terminal comes with two outputs, one is an m Connecting via the USB terminal SDI terminal that enables switchi
ページ19に含まれる内容の要旨
Preparation Connecting External Connecting the Power Devices Supply Connect the supplied power cable to this unit as follows. Connecting a wired remote control . . 1 Connect the supplied power cable to the AC IN terminal of this unit Using a wired connection enables stable control of this unit from an external device. 2 Connect the other end of the power cable to a Operation is possible using any code (1 to 4) regardless of power point the remote control code settings of this unit. 3 Press the [
ページ20に含まれる内容の要旨
Preparation 4 Select “CLOCK SET”, and press the [OK] button v Setting and Displaying The Clock Set menu screen appears. Date/Time Set the date/time of the built-in clock as follows. The recording date/time is stored on the disc. Setting the date/time Set the date/time of the built-in clock as follows. 1 Press the [SET UP] button on the remote control unit v The Settings menu screen appears. . 5 Set the time and date v Repeat the steps below to specify the time and date. ① Pres
