JVC LT-42B300の取扱説明書

ページ1に含まれる内容の要旨

LCD/Blu-ray Disc Combo TV Software Update Procedure
This document describes the procedure to update the software for LCD/Blu-ray Disc Combo TV:
LT-42B300
Tools Required
In preparing for the software update, you must meet the following requirements:
• Access to a PC capable of extracting ZIP archive files
• Access to a PC capable of writing one of the following formats DVD-RW / DVD-R / CD-RW / CD-R (Only for
-
Blu ray Player's Software Updating)
For Blu-ray Player's Software Update
Step 1

ページ2に含まれる内容の要旨

Others Disc Upgrade Software Upgrade? No Yes 9. Insert the software update disc you created in Step 3 into the disc slot of the Blu-ray Player The unit will begin to load the disc automatically Software Upgrade Loading Disc... http://firmware.jvc.com CJ42OB_2.2 Note : If the disc does not load or you receive the error message, check your disc and try again. Acceptable disc formats are DVD-RW / DVD-R / CD-RW / CD-R. 10. After a brief delay, the “Current Version” and “Insert Version” of Blu-ray P

ページ3に含まれる内容の要旨

12. After the software update has completed successfully,the "Finish" message will be shown at the bottom right of the TV screen Software Upgrade 2.Upgrading 1.Loading Upgrading Software... Please wait a moment. Do NOT turn off the unit during the software upgrade. Once the upgrade is completed, press 'POWER' to turn off the unit. http://firmware.jvc.com Finish 13. Turn off the LCD/Blu-ray Combo TV and wait 30 seconds 14. Turn on the LCD/Blu-ray Combo TV. The software update disc will be eje