ページ1に含まれる内容の要旨
CardBus ADSL Modem Card
Quick Installation Guide
M73-APO01-350
ページ2に含まれる内容の要旨
REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
ページ3に含まれる内容の要旨
FCC Part 68 Registration This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is label that contains, among other information, the FCC registration Number and Ringer equipment Number (REN) for the equipment. If requested, this information must be given to the Telephone Company. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but n
ページ4に含まれる内容の要旨
Introduction The CIA3000 is a cost effective ADSL solution that is designed with leading 32-bit bus architecture. With this CIA3000, you can simply plug the cord into a standard phone jack and enjoy faster, less expensive Internet access over an existing telephone line. It is the ideal solution for the entire family and the rising number of households with more than one PC. With the device, you can go to the Internet and talk on the telephone simultaneously. The CIA3000 achieves the transmissi
ページ5に含まれる内容の要旨
Features Build a network using your existing telephone line. No additional hubs or network cables needed Interoperable with all major central office DSLAMs. Most convenient way to share the internet connection, file, printer and peripherals in Home Data rate up to 8Mbps downstream and 768 Kbps upstream (Subject to DSLAM configuration). over telephone lines PC Card CardBus standard with high performance 32-bit PCI-like bus master architecture Works with any CardBus-equipped PC PC Card hot
ページ6に含まれる内容の要旨
Hardware Installation Installing the CardBus Network Device & Cabling 1. Insert CardBus Card into the CardBus slot of your system. 2. Connect one end of the telephone line to the ADSL port and the other end to the phone jack on the wall. - 5 -
ページ7に含まれる内容の要旨
Software Installation Windows 98 Installation 1. Insert the network device into the CardBus slot of your system. Windows 98 will automatically detect the device and prompt you with the following message. Click Next. 2. Select Search for the best driver for your device (Recommended) and click Next. 3. Load the CD-ROM into your CD drive and select Specify a location. Type D:\driver\ protocolpath\protocol_WIN98_WINME (where D is the letter of your CD-ROM drive). Windows 98/ME will start searchin
ページ8に含まれる内容の要旨
4. Click Next. Windows 98 will copy necessary files onto your system. 5. Click Finish to complete software installation. 6. When asked to restart your computer, click Yes to activate the device. - 7 -
ページ9に含まれる内容の要旨
Windows 2000 Installation 1. Insert the device into the CardBus slot of your system. Windows 2000 will automatically detect the device and prompt you with the following message. Click Next. 2. Select Search for a suitable driver for my device (Recommended) and click Next. 3. Load the device CD-ROM into your CD drive, select Specify a location and click Next. Windows 2000 will start searching for the suitable driver for the device. 4. Type D:\driver\ protocol\protocol_WIN98_WINME (where D is the
ページ10に含まれる内容の要旨
CD-ROM drive) in the following dialog box. Click OK. Windows 2000 will copy necessary files onto your system. 5. Click Next to continue. 6. Click Finish to complete software installation. - 9 -
ページ11に含まれる内容の要旨
Windows ME Installation 1. Insert the device into the CardBus slot of your system. Windows ME will automatically detect the device and prompt you with the following message. Select Specify the location of the driver (Advanced) and click Next. 2. Load CD-ROM into your CD drive and click Specify a Location when you see the following picture. Type D:\driver\ protocol\protocol_WIN98_WINME (where D is the letter of your CD-ROM drive) in the following box. Click Next. - 10 -
ページ12に含まれる内容の要旨
3. Click Next. Windows ME will copy necessary files onto your system. 4. Click Finish to complete software installation. Windows XP Installation 1. Insert the device into the CardBus slot of your system. Windows will automatically detect the device and prompt you with the following message. Select Install from a list or specific location (Advanced). Click Next. 1. Load the device driver CD-ROM into your disk drive and check Include this location - 11 -
ページ13に含まれる内容の要旨
in the search. Type D:\driver\ protocolpath\protocol_WINXP (where D is the letter of your CD-ROM drive)). Click Next to continue. 2. Click Continue Anyway when the following picture appears. 3. The installation program will proceed automatically. 4. Click Finish to complete the software installation. - 12 -
ページ14に含まれる内容の要旨
- 13 -
