ページ1に含まれる内容の要旨
BiPAC 7402VGO
VoIP/802.11g ADSL2+ VPN
Firewall Router
Quick Start Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
VoIP/802.11g ADSL2+ VPN Firewall Router For more detailed instructions on configuring and using the Billion VoIP/802.11g ADSL2+ VPN Firewall Router, please refer to the on-line manual. Package Contents VoIP/802.11g ADSL2+ VPN Firewall Router CD-ROM containing the online manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable Console (PS2-RS232) Cable AC-DC power adapter (12VDC, 1.2A) This Quick Start Guide Do not use this router in high hum
ページ4に含まれる内容の要旨
Quick Start Guide The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. Lit when connected to an Ethernet device. LAN Port 3 - 5 Green for 100Mbps; Orange for 10Mbps. 1X — 3X (RJ-45 connector) Blinking when data is Transmitted / Received. Lit green when the wireless connection is established. 7 WLAN Flashes when sending/receiving data. Phone 1X — 2X 8 – 9 Lit green when the phone is off-hook. (RJ-11 connector)
ページ5に含まれる内容の要旨
VoIP/802.11g ADSL2+ VPN Firewall Router The Rear Ports 1 6 5 3 4 2 7 8 9 Port Meaning Power Switch 1 Power ON/OFF switch PWR 2 Connect the supplied power adapter to this jack. After the device is powered on, press it to reset the device or restore to factory default settings. 0-3 seconds: reset the device 3 RESET 6 seconds above: restore to factory default settings (this is used when you can not login to the router, e.g. forgot the password) LAN Connect a UTP Ether
ページ6に含まれる内容の要旨
Quick Start Guide Connecting Your ADSL Router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit. 4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set. 5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack Switching/ HUB ADSL Phone ADSL Splitter Line Analog Phone Con
ページ7に含まれる内容の要旨
VoIP/802.11g ADSL2+ VPN Firewall Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish
ページ8に含まれる内容の要旨
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the confi
ページ9に含まれる内容の要旨
VoIP/802.11g ADSL2+ VPN Firewall Router Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuratio
ページ10に含まれる内容の要旨
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 8
ページ11に含まれる内容の要旨
VoIP/802.11g ADSL2+ VPN Firewall Router Configuring Your ADSL Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out. If your ping is successful which means your local network is able to reac
ページ12に含まれる内容の要旨
Quick Start Guide Connecting to the Router 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. 2. A username and password window will appear. The default username and password are admin and admin. Press OK to proceed. 3. You will get a status report web page and main menu screen. Navigation panel 10
ページ13に含まれる内容の要旨
VoIP/802.11g ADSL2+ VPN Firewall Router At the main menu screen, the left navigation panel where bookmarks are provided links you directly to the desired setup page, including: Status (ARP Table, Wireless Association, Routing Table, DHCP Table, PPTP Status, IPSec Status, L2TP Status, Email Status, VoIP Status, Event Log, Error Log, NAT Sessions and UPnP Portmap) Quick Start Configuration (LAN, WAN, System, Firewall, VPN, VoIP, QoS, Virtual Server, Time Schedule and Advanced)
