ページ1に含まれる内容の要旨
9/12/2008
®
VISIT THE LIFETIME WEB SITE:
WWW.LIFETIME.COM
Snow Load Kit For 11’ Sheds
Kit #1034594
**U.S. and Canada customers ONLY**
IF ASSISTANCE IS NEEDED,
DO NOT CONTACT THE STORE!!!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
Call, or visit our Website for Saturday hours.
**For customers outside the U.S. or Canada, please contact the store for assistance.**
INSTRUCTION #1046979 B
Copy
ページ2に含まれる内容の要旨
Before Beginning Assembly A. Identify and inventory all parts using the checklist boxes on the Parts List. Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department. PARTS LIST ID Part # Description Qty A 1034590 Truss Bracket A 2 B 1034591 Truss Bracket B 2 C 1046981 Long Truss Support 2 Hardware Bag [1039532] HA 300072 1/4”-20 x 1 1/2” Hex Bolt 6 HB BN00300 1/4”-20 Cap Nut 10 HC 1006750 1/4”-20 x 1 3/4” Hex Bolt 4 Tools and Mater
ページ3に含まれる内容の要旨
1.1: Slide Truss Bracket B (B) into Truss Bracket A (A) and align the holes as shown. Secure with two (2) 1/4”-20 x 1 1/2” Hex Bolts (HA) and two (2) Cap Nuts (HB). 1.2: Repeat Step 1.1 for each Truss Bracket Assembly. Top Top A HB HA HB B HA Bottom Bottom Angled end of Truss Bracket B (B) faces down. 1.3: Loosely attach a Truss Bracket Assembly to a Truss Channel using one (1) Hex Bolt (HA) and one (1) Cap Nut (HB) through the hole at the position shown. HA HB 3 Truss Channel Truss Channe
ページ4に含まれる内容の要旨
1.4: Loosely attach the Long Truss Support (C) to the Truss Channel using one (1) Hex Bolt (HC) and one (1) Cap Nut (HB). HB C HC 1.5: Rotate the Long Truss Support (C) upward until it meets the Truss Bracket Assembly and Truss Brace. C 4 Truss Brace Truss Channel Truss Channel
ページ5に含まれる内容の要旨
1.6: Mark the location of the hole on each side of the Truss Brace. Drill a hole at each spot, with a 5/16” Drill Bit. Mark the location of the hole on each side of the Truss Brace. 1.7: Loosely secure the Long Truss Support (A) and the Truss Bracket Assembly to the Truss Brace. HB HC C 1.8: Repeat Steps 1.3 to 1.7 for the other side of the Truss. 1.9: Tighten all hardware. 1.10: Repeat Steps 1.3 to 1.9 for all Trusses. When finished, all Trusses will look like this. 5 Truss Brace Truss B
