Lifetime 1034594 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

9/12/2008
®
VISIT THE LIFETIME WEB SITE:
WWW.LIFETIME.COM
Snow Load Kit For 11’ Sheds
Kit #1034594
**U.S. and Canada customers ONLY**
IF ASSISTANCE IS NEEDED,
DO NOT CONTACT THE STORE!!!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
Call, or visit our Website for Saturday hours.
**For customers outside the U.S. or Canada, please contact the store for assistance.**
INSTRUCTION #1046979 B
Copy

ملخص المحتوى في الصفحة رقم 2

Before Beginning Assembly A. Identify and inventory all parts using the checklist boxes on the Parts List. Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department. PARTS LIST ID Part # Description Qty A 1034590 Truss Bracket A 2 B 1034591 Truss Bracket B 2 C 1046981 Long Truss Support 2 Hardware Bag [1039532] HA 300072 1/4”-20 x 1 1/2” Hex Bolt 6 HB BN00300 1/4”-20 Cap Nut 10 HC 1006750 1/4”-20 x 1 3/4” Hex Bolt 4 Tools and Mater

ملخص المحتوى في الصفحة رقم 3

1.1: Slide Truss Bracket B (B) into Truss Bracket A (A) and align the holes as shown. Secure with two (2) 1/4”-20 x 1 1/2” Hex Bolts (HA) and two (2) Cap Nuts (HB). 1.2: Repeat Step 1.1 for each Truss Bracket Assembly. Top Top A HB HA HB B HA Bottom Bottom Angled end of Truss Bracket B (B) faces down. 1.3: Loosely attach a Truss Bracket Assembly to a Truss Channel using one (1) Hex Bolt (HA) and one (1) Cap Nut (HB) through the hole at the position shown. HA HB 3 Truss Channel Truss Channe

ملخص المحتوى في الصفحة رقم 4

1.4: Loosely attach the Long Truss Support (C) to the Truss Channel using one (1) Hex Bolt (HC) and one (1) Cap Nut (HB). HB C HC 1.5: Rotate the Long Truss Support (C) upward until it meets the Truss Bracket Assembly and Truss Brace. C 4 Truss Brace Truss Channel Truss Channel

ملخص المحتوى في الصفحة رقم 5

1.6: Mark the location of the hole on each side of the Truss Brace. Drill a hole at each spot, with a 5/16” Drill Bit. Mark the location of the hole on each side of the Truss Brace. 1.7: Loosely secure the Long Truss Support (A) and the Truss Bracket Assembly to the Truss Brace. HB HC C 1.8: Repeat Steps 1.3 to 1.7 for the other side of the Truss. 1.9: Tighten all hardware. 1.10: Repeat Steps 1.3 to 1.9 for all Trusses. When finished, all Trusses will look like this. 5 Truss Brace Truss B