ページ1に含まれる内容の要旨
Music al Master pieces
Serial Numbers ____________________
Handcrafted by:
_________________________________
_________________________________
_________________________________
_________________________________
This product is certified to meet the requirements of the European Union (EU)
Electromagnetic Compatibility (EMC) Directive (89/336/EEC). Because the
permanent magnets attached to the loudspeaker drivers produce magnetic fields,
it is recommended that the product not be positioned in ver
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Table of Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Introduction .................................................................................................6 C
ページ4に含まれる内容の要旨
9 Accuracy of Bass Reproduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Introduction .................................................................................................34 9.1 Sensitivity to Time-Related Information ..................................................................35 "Fast Bass" ............................................................................................
ページ5に含まれる内容の要旨
1 Introduction The Opus Ceramique was conceived as an alternative to our award winning original Opus. Designed specifically for moderate sized listening rooms, the Ceramique presents a taught and coherent soundfield, free of stored energy. Staging of exceptional clarity and harmonic structure is achieved through innovations in crossover technology and the use of low mass drivers, all utilizing the same ceramic diaphragm material. “Purity of musical communication”, was the touchstone phrase th
ページ6に含まれる内容の要旨
2 Unpacking Instructions Introduction Your Avalon Acoustics loudspeakers were shipped in a heavy-duty crate to ensure their safe arrival. It is recommended to save this crate for possible future use. Due to the weight of the speakers, it will require two persons to un-crate them and position them for listening. Please arrange for your dealer or other friend to assist in this project. Contents The shipping crate contains the following items: • two loudspeaker cabinets • two grille assemblies
ページ7に含まれる内容の要旨
2.1 Opening the Crate The crate features a one-piece top assembly which is fastened to the crate bottom with screws around the lower perimeter. To unpack, remove the screws and lift the upper portion of the crate straight up (this will require two people). Next, slide each speaker part way off of the crate base so that the plastic bag can be unfastened from the enclosure bottom. Stand the speaker up and the bag can be slid off the top. Please refer to Figure 2.1. ` 1. Remove screws. 2. Lift cas
ページ8に含まれる内容の要旨
2.2 Installing the Grilles The grille assemblies are behind a panel on the outside of the speaker crate. Remove the screws securing the panel, and then carefully pull the grilles straight out. The grilles are installed with friction fasteners and press into place on the speaker cabinets. Please see Figure 2.2. 1. Remove screwsand panel fromtop of crate.2. Pull grillesstraight out.3. Push grille pins straightinto grille pin sockets. Figure 2.2 - To install the grille assemblies. Orientation of t
ページ9に含まれる内容の要旨
2.3 Replacing Grille Pins The grille pins installed on the grille assemblies are fragile and can be easily damaged. Should any of the pins break, you may replace them using the following procedure. 1. Place the grille assembly face-down on a padded surface (a towel or carpeting). 2. Remove the damaged grille pin by pulling it straight out with a small pliers or similar tool. Please refer to figure 2.4. Make sure that the complete pin is removed and that there are no pin fragments left in the
ページ10に含まれる内容の要旨
4. Carefully pull the grille cloth away from the frame mounting hole. The mounting hole must be clear of all obstacles during pin installation. 5. Place the exposed end of the grille pin in the open mounting hole. Check to insure that the grille cloth is not trapped between the pin and frame. Use a small hammer and gently tap the new grille pin in place. Then, pull the insertion tool off the new pin and verify that the pin flange is flush with the surface of the grille. Please refer to Fi
ページ11に含まれる内容の要旨
3 Wiring Instructions Introduction The crossover is housed in a sealed, non-accessible chamber in the bottom of the speaker cabinet, to minimize the effect of vibration on the components. The Opus Ceramic is equipped with high-quality barrier terminals for connecting the speaker cables. Ring terminals or spade lugs designed for #10 screws are recommended for cable termination. Connecting the Speaker to the Amplifier 1. Place the speaker in its approximate location, then lay the speaker on its
ページ12に含まれる内容の要旨
INPUTS From Amplifier Figure 3.1 - Bottom view of the speakers showing the connections from the amplifier to the loudspeaker. Check to insure the correct polarity (positive lead connected to the (+) terminal and negative lead connected to the (-) terminal. 12
ページ13に含まれる内容の要旨
4 Break-in Period Your new Avalon Acoustics loudspeakers have an initial break-in period. They will not perform to their full sonic potential when first installed in your system. This is partially due to a residual polarization of the dielectric materials used in the crossover capacitors and internal 1 wiring. As music is played through the loudspeakers, the electrical signal will gradually anneal these materials. Similarly, the suspensions of the drivers will reach their optimal mechanical pr
ページ14に含まれる内容の要旨
5 Maximizing Performance These details are imperative to obtaining optimum results from your Avalon Acoustics loudspeakers. Break-in The break-in period is critical to maximizing sonic performance and should take place before other adjustments (see the discussion on page 13). The break-in should begin with three to six hours of quiet music, followed by 200 to 300 hours of loud and dynamic source material. Grille Assemblies The grille assemblies, with their felt anti-diffraction masks, are int
ページ15に含まれる内容の要旨
Toe-In Adjusting the toe-in angle of the speakers is useful in tailoring the sound to best match the characteristics of your system and listening room. When the speakers are facing straight forward, they tend to create a large, expansive sound-stage, painted with broad brush strokes. As they are rotated toward the listening position, the image becomes more compact, with increased focus, creating a greater sense of intimacy. Pointing the speakers inward is also helpful in situations where strong
ページ16に含まれる内容の要旨
First Reflection Points Since the ear/brain system tends to integrate the sounds arriving within a 10 millisecond time window, it is important to control the early reflections arriving from the sidewalls to the listening position. A hard-surfaced wall can produce a strong frequency-dependent reflection that can interfere with the reproduced sound-stage, as well as change the perceived tonal balance of the system. Therefore, damping these first reflection points is strongly recommended. Pleas
ページ17に含まれる内容の要旨
6 Care of Your Loudspeakers Cabinet (Hardwood Finish) Avalon Acoustics’ hardwood finished loudspeakers are supplied with a special polish and two lint-free polishing cloths, in order to properly care for the high quality furniture lacquer. The following polishing instructions should be observed: IMPORTANT: Use the supplied furniture polish ONLY. Do NOT use cleaners that contain ammonia, strong solvents, or abrasive materials. Use of these materials can degrade, scratch, or even DESTROY the fi
ページ18に含まれる内容の要旨
7 Warranty Your Avalon Acoustics loudspeakers are warranted against defects in workmanship and materials for a period of five years,!provided that the enclosed registration card is returned to the factory!within seven days of the purchase date. If the registration card is not returned within the seven day period, this warranty is null and void, and you will not be notified of future updates. In the unlikely event that you did not receive the registration card with your loudspeakers, please co
ページ19に含まれる内容の要旨
Warranty Statement 1. Avalon Acoustics warrants the materials, workmanship, and proper functioning of this product for a period of five years, provided that the completed registration card is returned to Avalon Acoustics within seven days of the date of purchase. If the registration card is not returned to the factory within the seven day period, this warranty is null and void. If any defects are found in the materials or workmanship of this Avalon Acoustics product, or if the product ceases
ページ20に含まれる内容の要旨
6. The above warranty is the sole warranty given by Avalon Acoustics, and is in lieu of all other warranties. All implied warranties, including warranties of merchantability or fitness for any particular purpose shall be strictly limited in duration to five years from the date of original purchase, and upon the expiration of the warranty period (five years), Avalon Acoustics shall have no further obligation of any kind whether express or implied, including but not limited to merchantability. Fur
