ページ1に含まれる内容の要旨
R
CDA-7846E
FM/AM Compact Disc Receiver
• OWNER'S MANUAL (page 2- page 55)
Please read this manual to maximize your
enjoyment of the outstanding performance and
feature capabilities of the equipment, then retain
the manual for future reference.
RLS DISC TITLE MEMORY OPEN
INTLZ DISC-IN CD RECEIVER 40Wx4 CDA-7846E
PWR
CHG MAX
MIN.
MODE BAND
SOURCE FUNC F1 F2 F3 ALL F4 ALL F5 F6
LOUD T.S.M.
DN 7 UP 8 M.I.X. 9 RPT 10 SCAN 11 MUTE 12 DX SEEK
DN 1 UP 2 D.A.P. 3 MONO 4 T.RCL 5 MUTE 6 ST LOUD
CLK
DEMO T
ページ2に含まれる内容の要旨
English Precautions This label is intended to alert the user to the presence of important operating instructions. Warning Failure to heed the instructions will result severe injury or death. DO NOT DISASSEMBLE OR ALTER. Doing so may lead to accident, fire or electric shock. KEEP SMALL ARTICLES OUT OF THE REACH OF CHILDREN. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. HALT USE IMMEDIATELY
ページ3に含まれる内容の要旨
English Contents Page 4 .......................................................................................... Precautions 7 ...................................................................... Detachable Front Panel Basic Operation 8 ........................................................................... Initial System Start-up 9 .................................................................... Turning Power On and Off 9 .............................................................
ページ4に含まれる内容の要旨
English Precautions Thermal Be sure the temperature inside the vehicle is +60°C between +60°C (+140°F) and –10°C (+14°F) before turning your unit on. –10°C Moisture Condensation You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate. Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism. Never Attempt th
ページ5に含まれる内容の要旨
English Precautions Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the Reset switch (located behind the detachable front panel) with a pointed object such as a ball-point pen. Playing a disc while driving on a very bumpy road
ページ6に含まれる内容の要旨
English Precautions Installation Location Make sure the CDA-7846E player/receiver will not be exposed to: • Direct sun and heat • High humidity • Excessive dust • Excessive vibrations Handling the Detachable Front Panel • Do not expose to rain or water. • Do not drop or apply shock. 6
ページ7に含まれる内容の要旨
English English Detachable Front Panel Detaching the Front Panel Press the PWR (Power) button to turn off the INTLZ 1 power. PWR Press the RLS (release) button until the front RLS 2 panel pops out. Grasp the left side of the front panel and pull it 3 out. Notes: • The front panel may become hot (especially the connector terminals), this is not malfunction. • To protect the front panel, place it in the supplied carrying case. Attaching the Front Panel 1. First, insert the right side of the front
ページ8に含まれる内容の要旨
English Basic Operation Initial System Start-Up When operating the unit for the first time after installation or after the vehicle's battery has 1 been disconnected and reconnected, set the volume level to its minimum, then remove the detachable front panel. (Refer to page 7.) Press the button with a ball-point pen or any 2 other pointed object. The plate opens automatically. There is a small hole at the lower right side. 3 Behind this hole the red Reset switch is located. Press the Reset switch
ページ9に含まれる内容の要旨
English Basic Operation Turning Power On and Off Press the PWR button to turn off the unit. INTLZ 1 PWR The volume level gradually increases to the previous level you were listening to before the unit was turned off. Press the PWR button again to turn off the unit. Turning Loudness On/Off Loudness introduces a special low- and high- frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. Press and hold the LOUD button for at lea
ページ10に含まれる内容の要旨
English Basic Operation Subwoofer On and Off Change the setting when an optional product having the Subwoofer output terminals is Ai- NET connected. Press and hold the PWR button for at least 3 INTLZ seconds. 1 PWR Press the F1 button repeatedly to select F1 SUBW ON "SUBW.". With each press, subwoofer is 2 toggled ON or OFF. SUBW OFF When the subwoofer is ON: Press the MODE button for at least 2 seconds repeatedly, and the subwoofer output phase is toggled 0° or 180°. INTLZ Press the PWR button,
ページ11に含まれる内容の要旨
English Basic Operation Non Fading Pre-Out (N.F.P.) On and Off Press and hold the PWR button for at least 2 INTLZ 1 seconds. PWR Press the F1 button. With each press, N.F.P. is toggled On or Off. 2 F1 N.F.P. ON N.F.P. ON: In this position, the Front Pre- Output will not be affected by the fader. This is ideal for driving a N.F.P. OFF subwoofer amplifier. N.F.P. OFF:Returns to normal fader mode. Note: Set the N.F.P. to OFF unless the subwoofer is used. INTLZ Press the PWR button to set the sel
ページ12に含まれる内容の要旨
English Basic Operation Adjusting Volume/Bass/ Treble/Balance/Fader Press the MODE/LOUD button repeatedly to 1 choose the desired mode. VOLUME Notes: MODE BASS LOUD • If the or button is not pressed in 5 seconds after selecting the BASS, TREBLE TREBLE, BALANCE and FADER modes, the unit automatically returns to the VOL BALANCE mode. • With the subwoofer mode turned on, the subwoofer output level can be adjusted. FADER Press the button or until the desired 2 sound is obtained in each mode. Not
ページ13に含まれる内容の要旨
English Basic Operation Audio Mute Function Activating this function will instantly lower the volume level by 20 dB. Press the F6 button to activate the MUTE 1 mode. The volume bar graphic indicator will F6 (ON) flash in the display and the audio level will F6 MUTE decrease by about 20 dB. Pressing the F6 button again will bring the F6 (OFF) audio back to its previous level and the display MUTE will return to normal. In the CD mode, press the F6 button when the FUNC indicator is off. Sound (Beep
ページ14に含まれる内容の要旨
English Basic Operation Adjusting Display Contrast You can adjust the display contrast for better visibility. INTLZ Press and hold the PWR button for at least 2 1 PWR seconds. Press the F3 button. The "CONTRAST" is F3 displayed. 2 Press the c or f button to adjust the contrast CONTRAST 0 3 of the display. You can adjust in a range of –6 and +6. The initial setting at the factory is "0". DN UP INTLZ Press the PWR button to set the selected PWR mode. 4 14
ページ15に含まれる内容の要旨
English Basic Operation Turning Mute Mode On/Off With a cellular phone or navigation system connected, audio will be interrupted whenever a call is received. This function can be manually turned ON or OFF from the head unit by following procedure below. INTLZ Press and hold the PWR button for at least 2 PWR 1 seconds. With each press of the F4 button, the MUTE is F4 2 toggled ON or OFF. MUTE ON MUTE OFF Press the PWR button again to return to normal INTLZ 3 operation. PWR 15
ページ16に含まれる内容の要旨
English Basic Operation Demonstration In the Demonstration (DEMO) mode, the unit scans each function of the sources; Tuner, CD player and CD shuttle if an optional CD Shuttle is connected. Press the DEMO button to activate the DEMO mode. 1 DEMO The DEMO mode is activated and the unit automatically performs the operation. To end the DEMO mode, press the DEMO 2 button. DEMO 16
ページ17に含まれる内容の要旨
English Basic Operation Displaying Time Press the CLK (CLOCK) button to display the 1 time. The unit displays the time. CLK 12:00 TITLE Note: Selecting any tuner or CD function while in the Clock mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. Press the CLK (CLOCK) button to turn off the CLK time and to show other functions. 2 TITLE 17
ページ18に含まれる内容の要旨
English Basic Operation Setting Time Press the CLK (CLOCK) button to display the CLK time. 1 TITLE 12:00 Note: If the power to the unit is off, turn the power. Press and hold the CLK (CLOCK) button for at least 2 seconds. The time indication will begin 2 CLK to blink. TITLE 12:30 Press the F4 button while the time indication is F4 blinking to set seconds to "0". 3 12:00 Example: To adjust to 9:35 4 F5 Press the F5 button to adjust the hours while 9:00 the time indication is blinking. Press the F
ページ19に含まれる内容の要旨
English Basic Operation Using the Function Button The chart below describes the function of each preset button. The function will change depending upon the source selected and the condition of the FUNCTION switch, ON or OFF. FUNC Press the FUNC (FUNCTION) button. The 1 function mode will change each time you press the button. (Refer to the chart below.) F1 F6 Press any one of the – buttons. 2 F1 F2 F3 F4 F5 F6 Function F1 F2 F3 F4 F5 F6 indicator Mode (on/ off) Preset 1 Preset 2 Preset 3 Pres
ページ20に含まれる内容の要旨
English Radio Operation Manual Tuning Press the SOURCE button to select the radio 1 mode. SOURCE Press the BAND button repeatedly until the desired radio band is displayed. 2 BAND T.S.M. FM1 FM2 AM Press the TUNE button repeatedly until "MANUAL" appears in the display. 3 DX SEEK TUNE A. ME Note: The initial mode is DX SEEK. LOCAL SEEK MANUAL Press the ( c ) DN or UP (f ) button to move F1 82.5 4 downward or upward one step respectively until the desired station frequency is displayed. DN UP Note
