ページ1に含まれる内容の要旨
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ТОЛЬКО
ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ΡΗΣΗ Μ
Ν
ΣΕ ΑΥΤ
ΚΙΝΗΤ
EN
R
MP3/WMA/AAC CD Receiver
DE
CDE-W203Ri
FR
ES
IT
• OWNER’S MANUAL • ANVÄNDARHANDLEDNING
Please read before using this equipment. Innan du använder utrustningen bör du läsa
igenom denna användarhandledning
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ENGLISH File/Folder Name Search Contents (concerning MP3/WMA/AAC) ................... 13 Quick Search ...................................................13 Operating Instructions About MP3/WMA/AAC .................................13 Sound Setting WARNING Adjusting Subwoofer Level/Bass Level/Treble WARNING ................................................. 3 Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat ...............15 CAUTION ..................................
ページ4に含まれる内容の要旨
USB memory (Optional) Controlling USB memory (Optional) ............. 20 Playing MP3/WMA/AAC Files with the USB memory (Optional) ...................................... 20 USB memory Connection (Optional) ............. 21 About MP3/WMA/AAC File of USB Memory .......................................................21 iPhone/iPod (Optional) Playback .......................................................... 22 Searching for a desired Song .......................... 22 Quick Search ..............
ページ5に含まれる内容の要旨
Operating Instructions WARNING CAUTION This symbol means important instructions. Failure to heed them can result in injury or WARNING material property damage. This symbol means important instructions. Failure to heed them can result in serious injury HALT USE IMMEDIATELY IF A PROBLEM APPEARS. or death. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. DO NOT OPERATE ANY FUNCTI
ページ6に含まれる内容の要旨
Never Attempt the Following Installation Location Do not grip or pull out the disc while it is being pulled back into the Make sure this unit will not be installed in a location subjected to: player by the automatic reloading mechanism. � Direct sun and heat Do not attempt to insert a disc into the unit when the unit power is � High humidity and water off. � Excessive dust � Excessive vibrations Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerpr
ページ7に含まれる内容の要旨
On handling Compact Discs (CD/CD-R/CD-RW) Protecting the USB connection terminal � Do not touch the surface. � Only a USB flash memory devices can be connected to the USB � Do not expose the disc to direct sunlight. connection terminal on this unit. Correct performance using � Do not affix stickers or labels. other USB products cannot be guaranteed. A USB hub is not � Clean the disc when it is dusty. supported. � Make sure that there are no bumps around the disc. � Do not connect a USB memory
ページ8に含まれる内容の要旨
• Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United CAUTION States and/or other countries. Alpine accepts no responsibility for lost data, etc., even if data, etc., � iPod is a trademark of Apple Inc., registered in the U.S. and is lost while using this product. other countries. � iPhone is a trademark of Apple Inc. On Handling USB Memory � “Made for iPod” means that an electronic accessory has been � To prevent malfunction or
ページ9に含まれる内容の要旨
Adjusting Volume Getting Started Turn the Rotary encoder until the desired sound is obtained. Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. Press MUTE to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing MUTE again will bring the audio back to its previous level. MUTE /ESC 6/DIMMER /ENT FUNC./SETUP SOURCE/ Rotary encoder Setting the Time 1 Press and hold FUNC./SETUP for at least 2 seconds Accessory Lis
ページ10に含まれる内容の要旨
Setting the Dimmer Control Radio 1 Press FUNC./SETUP so that the indicator Preset buttons Preset buttons lights up. (1 through 3) (4 through 6) 2 Press 6/DIMMER repeatedly to select the DIMMER mode. DIMMER-A (Auto mode) DIMMER ON DIMMER OFF DIMMER-A DIMMER-A mode: Decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit’s backlighting is too bright at night. DIMMER ON mode: Keep the illumination brightness of the
ページ11に含まれる内容の要旨
Presetting Stations Manually RDS 1 Select the radio band and tune in a desired radio 1/AF station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized. � A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW). � If you
ページ12に含まれる内容の要旨
Recalling Preset RDS Stations PI SEEK Setting 1 Press FUNC./SETUP so that the indicator 1 Press and hold FUNC./SETUP for at least 2 lights up. seconds to activate the SETUP mode. 2 Press 1 /AF to activate the RDS mode. 2 Turn the Rotary encoder to select the PI SEEK mode, and then press /ENT. 3 Press FUNC./SETUP to activate the normal mode. The indicator goes out. 3 Turn the Rotary encoder to select ON or OFF. 4 Make sure that the indicator light goes out, then 4 Press and hold FUNC./SETUP
ページ13に含まれる内容の要旨
Receiving Traffic Information While CD/MP3/WMA/AAC Playing CD or Radio /REPEAT 4 1 Press and hold BAND/TA for at least 2 seconds so 1/AF 2 /SHUFFLE 5 /CD that the “TA” indicator lights up. 2 Press or to select a traffic information station if necessary. When a traffic information broadcast starts, the unit automatically mutes the CD player or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the t
ページ14に含まれる内容の要旨
3 Press or to select the desired track (file). MP3/WMA/AAC mode : Returning to the beginning of the current track (file): Press . : Only a file is repeatedly played back. Fast backward: Press and hold . : Only files in a folder are repeatedly played back. Advancing to the beginning of the next track (file): Press . Fast forward: Press and hold . M.I.X. (Random Play) 4 To pause playback, press / . Pressing / again will resume playback. Press /SHUFFLE 5 in the play or pause mode. The tracks
ページ15に含まれる内容の要旨
File/Folder Name Search About MP3/WMA/AAC (concerning MP3/WMA/AAC) CAUTION Folder and file names may be searched and displayed during playback. Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, 1 During MP3/WMA/AAC playback, press /ENT to whether for free or for a fee, without permission of the copyright activate the search mode. holder is strictly prohibited by the Copyright Act and by international treaty. 2 Turn the
ページ16に含まれる内容の要旨
Supported playback sampling rates and bit rates Order of files Files are played back in the order that the writing software writes MP3 them to the disc. Therefore, the playback order may not be what Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, is expected. Verify the writing order in the software’s 16 kHz, 12 kHz, 11.025 kHz, 8 kHz documentation. The playback order of the folders and files is as Bit rates: 8 - 320 kbps follows. WMA Sampling rates: 48 kHz, 44.1 kHz, 32 kHz Bi
ページ17に含まれる内容の要旨
Setting the Bass Control Sound Setting You can change the Bass Frequency emphasis to create your own tonal preference. 1 Press SOUND repeatedly to select the BASS mode. BASS TREBLE HPF BASS Setting the Bass Centre Frequency 2-1 Press BAND/TA to select the desired bass centre frequency. 80 Hz 100 Hz 200 Hz 60 Hz 80 Hz Emphasises the displayed bass frequency ranges. /ESC SOURCE/ SOUND Setting the Bass Bandwidth BAND/TA Rotary encoder (AUDIO/LOUD) 2-2 Press SOURCE/ to select the desired ba
ページ18に含まれる内容の要旨
Setting the Treble Centre Frequency Other Functions 2-1 Press BAND/TA to select the desired treble centre frequency. 10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz Emphasises the displayed treble frequency ranges. Setting the Treble Level 2 2-2* Turn the Rotary encoder to select the desired treble level (–7~+7). You can emphasise the treble level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode. SOURCE/ VIEW � If no operation is performed for 15 seconds, the unit will
ページ19に含まれる内容の要旨
1 * If VIEW is pressed and held for at least 2 seconds in the PS display mode, frequency will be displayed for 5 seconds. Displaying Time 2 * Displayed during playback of a disc with CD text. 3 * If there is no time sample, “BT A” is displayed as “BT AUDIO”. Press VIEW repeatedly until the time is displayed. 4 * ID3 tag/WMA tag If an MP3/WMA/AAC file contains ID3 tag/WMA tag information, Each press changes the display. For details, see “Displaying the Text” (page 16). the ID3 tag/WMA tag infor
ページ20に含まれる内容の要旨
4 Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode. SETUP � Press /ESC to return to the previous mode. � If no operation is performed for 60 seconds, the unit will return to You can flexibly customize the unit to suit your own preferences and normal mode automatically. usage. From the SETUP menu, Sound Customizing, Visual Customizing, etc., can be modified. Bluetooth Setting Setting the Bluetooth Connection (BT IN) BT ADAPTER (Initial setting) / BT OFF With Blueto
