ページ1に含まれる内容の要旨
R
EN
DVA-7996
FM/AM DVD Player
FR
DIGITAL VIDEO
ES
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
ES
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
IT
ALPINE ELECTRONICS, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ELECTRONICS FRANCE S.A.R.L.
Tokyo office: 1-1-8 Nishi Gotanda, 6-8 Fiveways Boulevarde Keysborough, (RCS PONTOISE B 338 101 280)
Shinagawa-ku, Victoria 3173, Australia
98, Rue de la Belle Et
ページ2に含まれる内容の要旨
CHA-S634 CHM-S630 CHA-1214 • CD changer for DVA-7996 • CD changer for DVA-7996 • Changeur CD pour le DVA-7996 • Changeur CD pour le DVA-7996 • Cambiador de CD para el DVA-7996 • Cambiador de CD para el DVA-7996 Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a supe
ページ3に含まれる内容の要旨
ENGLISH Contents SETUP Operation Operating Instructions Setting the Sound Quality of the Tuner .......... 16 Changing Lighting Color ................................ 16 WARNING Dimmer Control .............................................. 16 WARNING..................................................3 Subwoofer On and Off .................................... 16 CAUTION ...................................................3 Sound (Beep) Guide Function ........................ 17 PRECAUTIONS .........
ページ4に含まれる内容の要旨
MP3 Operation Displaying the disc status and Playing MP3 Files ........................................... 23 changing the settings ........................................33 Playing MP3 Files with the CD Changer Displaying the disc status and (Optional) .................................................... 23 changing the settings ........................................33 Music Sensor (Skip)........................................ 23 Rear DVD function ..........................................3
ページ5に含まれる内容の要旨
WARNING WARNING CAUTION This symbol means important instructions. Failure This symbol means important instructions. Failure to heed them can result in serious injury or death. to heed them can result in injury or material property damage. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR HALT USE IMMEDIATELY IF A PROBLEM APPEARS. ATTENTION AWAY FROM SAFELY DRIVING YOUR Failure to do so may cause personal injury or damage to the VEHICLE. product. Return it to your authorized Alpine dealer or the neares
ページ6に含まれる内容の要旨
WARNING Correct Handling PRECAUTIONS Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or Never Attempt the Following gummed labels to the disc. Do not write on the disc. Do not grip or pull out the disc while it is being pulled back into CORRECT the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. INCORRECT CORRECT Inserting Discs Disc Cleaning Your
ページ7に含まれる内容の要旨
Discs playable on this unit On handling Compact Discs (CD/CD-R/ CD-RW) • Playable discs • Do not touch the surface. The discs listed below can be played on this DVD head • Do not expose the disc to direct sunlight. unit. • Do not affix stickers or labels and do not write on the surface. Mark (logo) Recorded Disc size Max. • Clean the disc when it is dusty. content playing time • Make sure that there are no bumps around the disc. • Do not use commercially available disc accessories. One-sided d
ページ8に含まれる内容の要旨
Notes on Using Remote Control Battery Replacement Applicable battery: Use two “AAA” sized dry batteries or Point the remote control transmitter at the remote equivalent. control sensor. 1 Opening the battery cover. Remote control sensor Push on the cover and slide it as indicated by the arrows then the cover will be removed. • Point the remote control at the remote sensor within about 2 meter. • It may not be possible to operate the remote control unit if the remote control sensor is exposed to
ページ9に含まれる内容の要旨
Basic Operation Initial System Start-Up POWER RESET Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, etc., or after changing the car battery. 1 Make sure that the power of the unit is off. If the power is on, press and hold the POWER button for at least 3 seconds to turn off the unit. ANGLE 2 Press the RESET switch with a ballpoint pen, or any other pointed object. The DVA-7996 can be operated using both the buttons on the main unit and t
ページ10に含まれる内容の要旨
Basic Operation Audio Mute Function BAND DN MODE (Rotary encoder) DISP/B.OUT Activating this function will instantly lower the volume level by 20 dB. 1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing the MUTE button again will bring the audio back to its previous level. CENTER f MUTE UP X-OVER Blackout Mode On and Off When the Blackout mode is turned on, the display will Adjusting Volume/Balance (Between turn off to reduce power consumption
ページ11に含まれる内容の要旨
Setting the Bass Control 2-2 Setting the treble Level: Turn the Rotary encoder to select the desired Treble Level (–7~+7). You can change the Bass Frequency emphasis to You can emphasize the treble frequency. create your own tonal preference. NOTES • If no buttons are pressed within 15 seconds, the Treble control 1 Press the CENTER f button to select the BASS (bass setting will be turned off automatically. Center frequency) control mode. • The settings of the Treble Level will be individually BA
ページ12に含まれる内容の要旨
Basic Operation Here we calculate the time correction value for the front left speaker in the diagram at the left. Rotary encoder Conditions: BAND Farthest Speaker – listening position : 2.25 m (88-9/16") Front left speaker – listening position : 0.5 m (19-11/16") Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8") Time correction = 1.75 ÷ 343* × 1000 = 5.1 (ms) *Speed of sound: 343 m/s (765 mph) at 20˚C In other words, giving the front left speaker a time correction value of 5.1 ms makes it seem
ページ13に含まれる内容の要旨
Example of Steps 2 and 3 Setting Bass Focus (1) After entering corrections for the front (left and right) speakers in STEP 15, the time difference is 1.5 ms for The time difference between the front-rear/left-right both front-left and front-right speakers. speakers, can be adjusted at the same time. With an initial delay of 0.1 ms for each of the 0 to 99 steps, audible time correction can be done. 1 Press the T.CORR button to select the Bass Focus mode. 1.5ms 1.5ms Bass Focus mode Time correctio
ページ14に含まれる内容の要旨
Basic Operation Setting the MX Mode MX (Media Xpander) makes vocals or instruments BAND sound distinct regardless of the music source. The radio, SOURCE CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise. 1 Press the MX button to select MX ON. 2 Press the SOURCE button to select the source you want to MX (Media Xpander)-correct. CLK MX T.CORR 3 Press and hold the MX button for at least 2 seconds to Rotary encoder/Q. S. select the MX mode. Time Differen
ページ15に含まれる内容の要旨
Quick Searching Function Displaying Time 1 Press the CLK (clock) button repeatedly until the time You can easily select tracks and files. is displayed. 1 Press the SOURCE button to set the desired source Each press changes the modes as follows: mode. (CD mode is explained here as an example) Radio mode Clock priority 2 When setting the CD mode, press and hold the Q.S. Radio frequency TITLE mode mode button for at least 2 seconds. The mode changes to the Q.S. (Quick Search) setting. CD Player/Cha
ページ16に含まれる内容の要旨
Basic Operation MP3 mode: ELAPSED TIME DISPLAY Rotary encoder BAND CLOCK DISPLAY FOLDER NAME DISPLAY FILE NAME DISPLAY 2 * ID3 TAG DISPLAY 3 TITLE * FRAME DISPLAY DN UP DVD/Video CD mode: Displaying the Title/Text * 4 It is possible to display the Disc/Station on the audio ELAPSED TIME DISPLAY display if the title has been previously inputted. For CLOCK DISPLAY details, see “Titling Disc/Stations” (page 15). Text information, such as the disc name and the track name, TITLE DISPLAY will be
ページ17に含まれる内容の要旨
Titling Discs/Stations Erasing Disc Title/Station Title 1 Press the TITLE button to select the titling mode. Then, It is possible to title your favorite Disc's (CD, DVD, Video press and hold for at least 3 seconds. CD) or radio stations. You cannot input titles on MP3 discs. 2 Press and hold the button for at least 2 seconds to activate the title scanning mode. The title in the display 1 Press the TITLE button and select the title display will blink. mode. For details, see “Displaying the Title
ページ18に含まれる内容の要旨
SETUP Operation Dimmer Control SOURCE BAND MODE/Rotary encoder Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the DN or UP button to select SETUP “DIM”(DIMMER). DN UP 3 Press the BAND button to select the Dimmer mode. Each press toggles between DIM AUTO and DIM Setting the So
ページ19に含まれる内容の要旨
NOTES Setting the AUX Mode (V-Link) • It is not possible to adjust the subwoofer output level when “SUB-W LINK” is selected and the rear DVD function is turned on. You can input TV/video sound by connecting an optional • Any subwoofer adjustment (level or phase) made while the Ai-NET/RCA Interface cable (KCA-121B) or Versatile rear DVD function is turned on, is stored in memory. The Link Terminal (KCA-410C) to this component. settings stored are recalled the next time the rear DVD function is tu
ページ20に含まれる内容の要旨
SETUP Operation Setting the Digital Output Rotary encoder To connect an audio processor using the optical digital BAND output, set to “ON” with the following procedure. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the DN or UP button to select “OPTOUT” mode. 3 Press the BAND button to set ON. SETUP NOTE DN UP The initial setting at the factory is “OPTOUT OFF”. 4 Press the SETUP button to return to normal mode. Setting the External Input Defeat NOTE Afterwards, set ACC to O
