Heat Controller RADS-81Hの取扱説明書

ページ1に含まれる内容の要旨

ページ2に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. • Contact an authorized service technician for repair or maintenance of this unit. • Contact an authorized installer for installation of this unit. • If the power cord needs to be replaced, replacement work shall be performed by authorized service personnel only. • Installation work must be performed in accordance with the national and local electric codes and must be performed by authorized personnel only. NOTE: All

ページ3に含まれる内容の要旨

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual SafetyPrecautions Topreventinjurytotheuserorotherpeopleandpropertydamage,thefollowinginstructions To prevent injury to the user and propert damage, the following instructions must be mustbefollowed.Incorrectoperationduetoignoringofinstructionsmaycauseharmor followed. Incorrect operation due to ignoring instructions may cause harm or damage. The seriousness is classified by the following indication

ページ4に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. CAUTION ! ! Ventilate the room well When the air filter is to be Donotcleantheair Do not allow water to Ventilatetheroomwellwhen Whentheairfilteristobe ! when used together with rremoved,donottouchthe emoved, do not touch the conditionerwithwater enter inside the un.it usedtogetherwithastove, metalpartsoftheunit. etc. a gas stove or if there is metal parts of the unit during cleaning a gas leak I

ページ5に含まれる内容の要旨

, Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual IMPORTANTSAFETYINSTRUCTIONS WARNING Foryoursafety NOTE Forsomemodels,thepower Donotstoreorusegasolineorotherflammablevaporsandliquidsin supplycordwiththisairconditioner thevicinityofthisoranyotherappliance. containsacurrentdetectiondevice Avoidfirehazardorelectricshock.Donotuseanextensioncordoran designedtoreducetheriskoffire. adaptorplug.Donotremoveanyprongfromt

ページ6に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. Unit may vibrate and make noise because of poor wall or window construction or incorrect installation. Pinging or Swishing Droplets of water hitting condenser during normal operation may cause pinging or swishing sounds. Gurgling or hissing noise may be heard due to refrigerant passing through evaporator during normal operation. NOTE: Clear Air and/or Follow Me features only apply to certain models. Your control

ページ7に含まれる内容の要旨

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual TO CHANGE TEMPERATURE SETTING: Press or hold either Left (<) or Right (>) Temp/Timer buttons until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 62°F (17°C) and 86°F (30°C). If you want the display to read the actual room temperature, see “To Operate on Fan Only” section. The fan speed button is used to select the Fan Speed in four steps: Auto, Low, Med

ページ8に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. To choose operating mode, press the Mode button. TO SELECT THE OPERATING MODE: Each time you press the button, a mode is selected in a sequence that goes from Auto, Cool, Dry and Fan. The indicator light beside will illuminate and remain on once the mode is selected. When you set the air conditioner in AUTO mode, it will automatically select cooling or fan only operation depending on what temperature you have selected an

ページ9に含まれる内容の要旨

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual AIR CONDITIONER FEATURES (CONTINUED) • TIMER: AUTO START/STOP FEATURE • • • • • This feature is a reminder to clean the Air Filter for more ef- • ficient operation. The LED will illuminate after 250 hours of operation. To reset after cleaning the filter, press the Check Filter button and the light will go off. 8

ページ10に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. AIR CONDITIONER FEATURES (CONTINUED) THE DISPLAYS * The control is capable of displaying temperature in degree Fahrenheit or degrees Celsius. To convert from one to the other, press and hold the Left and Right Temp/Timer buttons at the same time, for 3 seconds. The fan will continue to run during this time, but the compressor will remain off and no cooling will occur. Once the 3 minutes has passed, the compressor will turn

ページ11に含まれる内容の要旨

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual The louvers will allow you to direct the air flow Up, Left or Right throughout the room as needed. Pivot horizontal louvers until the desired Up direction is obtained. 10

ページ12に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. B. Slide the free end and “I” section of the panel into the cabinet as shown in Fig. 2A, 2B & 3. Slide the panel down. Be sure to leave enough space to slip the top and bottom of the frame into the rails on the cabinet. 11

ページ13に含まれる内容の要旨

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual 12

ページ14に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. 13

ページ15に含まれる内容の要旨

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual 104°F (40°C) 14

ページ16に含まれる内容の要旨

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc. TROUBLESHOOTINGTIPS Beforecallingforservice,reviewthislist.Itmaysaveyoutimeandexpense. Thislistincludescommon occurrencesthatarenottheresultofdefectiveworkman-shipormaterialsinthisappliance. Problem Solution Wallplugdisconnected.Pushplugfirmlyintowalloutlet. Airconditioner doesnotstart Housefuseblownorcircuitbreakertripped.Replacefusewithtimedelaytypeor resetcircuitbreake

ページ17に含まれる内容の要旨

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual Problem Solution Unitremovinglargequantityofmoisturefromhumidroom.Thisisnormalduring Waterdripping excessivelyhumiddays. OUTSIDEwhen unitiscooling. Remotecontrolnotlocatedwithinrange.Placeremotecontrolwithin20feet&180, RemoteSensing radiusofthefrontoftheunit. Deactivating Prematurely Remotecontrolsignalobstructed.Removeobstruction. (somemodels) Settemperaturetoolow.Increaseset

ページ18に含まれる内容の要旨

10 1/2010 4/2009