Furuno NAVNET 1954Cの取扱説明書

デバイスFuruno NAVNET 1954Cの取扱説明書

デバイス: Furuno NAVNET 1954C
カテゴリ: 航海用レーダー
メーカー: Furuno
サイズ: 4.2 MB
追加した日付: 12/31/2013
ページ数: 91
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスFuruno NAVNET 1954Cの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Furuno NAVNET 1954Cに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Furuno NAVNET 1954Cをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Furuno NAVNET 1954Cのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Furuno NAVNET 1954Cの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Furuno NAVNET 1954C 取扱説明書 - Online PDF
Advertisement
« Page 1 of 91 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Furuno NAVNET 1954Cを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Furuno NAVNET 1954Cの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

Installation Manual
MARINE RADAR MODEL1824C/1834C/
1934C/1944C/1954C/1964C
COLOR VIDEO PLOTTER GD-1920C
2.4 Wiring the Power Supply Unit (MODEL
SAFETY INSTRUCTIONS......................i
1954C/1964C)................................ 2-6
EQUIPMENT LISTS ..............................ii
SYSTEM CONFIGURATIONS..............iv
3. SETTING UP THE EQUIPMENT ....3-1
3.1 Setting up with the Installation Wizard.
1. MOUNTING ....................................1-1
.................................

ページ2に含まれる内容の要旨

The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A : FEB. 2005 All rights reserved. Printed in Japan K : MAR. 23, 2011 Pub. No. IME-35430-K (HIMA ) MODEL1804C_GD-1920C *00015180319* *00015180319* **00015180319 00015180319** * 0 0 0 1 5 1 8 0 3 1 9 *

ページ3に含まれる内容の要旨

SAFETY INSTRUCTIONS WARNING WARNING Do not open the equipment Radio Frequency unless totally familiar with Radiation Hazard electrical circuits and service manual. The radar antenna emits electromagnetic radio frequency (RF) energy which can be Only qualified personnel ELECTRICAL harmful, particularly to your eyes. Never should work inside the SHOCK look directly into the antenna aperture from HAZARD equipment. a close distance while the radar is in operation or expose you

ページ4に含まれる内容の要旨

EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks Display unit RDP-149 - 1 RSB-0094-075 - MODEL 1824C RSB-0071-057 - MODEL 1834C XN10A-RSB-0070-064 - MODEL1934C, 24 rpm XN10A-RSB-0073-064 - MODEL1934C, 48 rpm XN12A-RSB-0070-059 - 1 MODEL1944C, 24 rpm XN12A-RSB-0073-059 - MODEL1944C, 48 rpm Antenna unit XN12A-RSB-0072-060 - MODEL1954C, 4 ft, 24 rpm XN12A-RSB-0073-060 - MODEL1954C, 4 ft, 48 rpm XN13A-RSB-0072-060 - MODEL1954C, 6 ft, 24 rpm XN12A-RSB-0072-061 - 1 MODEL19

ページ5に含まれる内容の要旨

(Con’t from next page) Name Type Code No. Qty Remarks Installation For power supply unit of 1954C materials cable VL3P-VV-S2X2C-AA050 CP03-24500 000-080-191 1 cable MJ-B24LPF0009-050 Inst. Mat. CP03-24501 For power supply unit of 1964C cable VL3P-VV-S2X2C-AA050 CP03-30600 000-084-769 1 cable MJ-B24LPF0011-050 Inst. Mat. CP03-30601 SP03-14501 000-844-420 1set Fuses for power supply unit PSU-008 (Model 1964C) SP03-14001 000-080-018 1set Fuses for power supply unit Spare parts PSU-0

ページ6に含まれる内容の要旨

SYSTEM CONFIGURATIONS All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end. The number of display units which may be installed depends o

ページ7に含まれる内容の要旨

GPS receiver GP-320B/330B or Weather station * Not required for AIS WS-200 Transponder FA-150 External buzzer AIS Interface AIS transponder VGA monitor IF-1500AIS* Remote display PC Video equipment ARPA ARP-11 Display unit RDP-149 FA-30 HUB AIS RECEIVER Echo sounder Navigator Other NavNet Unit (Model 1834C, etc.) Rectifier Network Facsimile PR-62 Sounder Receiver ETR-6/10N 12 - 24 VDC FAX-30 ETR-30N 100/110/115/220/230 VAC : Standard 1φ, 50/60 Hz : Option : Local supply NavNet system: GD-1

ページ8に含まれる内容の要旨

Radar Antenna Unit, Radar Antenna Unit, GPS Receiver GP-320B/330B GPS Receiver GP-320B/330B OR OR Weather Station WS-200 Weather Station WS-200 RADAR RADAR or or PLOTTER PLOTTER Radar, plotter data Radar, plotter data Two-unit NavNet system Radar Antenna Unit, Radar Antenna Unit, GPS Receiver GP-320B/330B GPS Receiver GP-320B/330B OR OR Weather Station WS-200 Weather Station WS-200 RADAR RADAR or or PLOTTER PLOTTER Radar data Plotter data HUB Sounder data Sounder data Note: The picture disapp

ページ9に含まれる内容の要旨

1. MOUNTING NOTICE Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic parts, especially plastic connectors. 1.1 Mounting the Display Unit The display unit can be mounted on a tabletop, on the overhead or flush mounted in a console or panel. Table Top Overhead Hard Cover Tabletop, overhead mounting method 1.1.1 Mounting considerations When selecting a mount

ページ10に含まれる内容の要旨

1.1.2 Mounting procedure Tabletop, overhead mounting Follow the procedure below to mount the display unit on a tabletop or the overhead. 1. Fix the hanger by using four tapping screws (5x20). 2. Screw knob bolts in display unit, set it to the hanger, and tighten the knob bolts. 3. Attach the hard cover to protect the LCD. Display unit Tapping screws (4 pcs.) Knob bolts (2 pcs.) Hanger Tabletop, overhead mounting of display unit Note: For the overhead mounting, reinforce the mounting l

ページ11に含まれる内容の要旨

Flush mounting Note: Use supplied pan head screws when the thickness of the bulkhead is from 11 to 14 mm. For bulkhead which exceeds 14 mm in thickness, the length of the pan head screws should be bulkhead thickness (A) plus 7.8±1.2 mm. Also the length of B should be max. 8 mm. B A Fixing screw, side view 1. Prepare a cutout in the mounting location whose dimensions are as shown below. 2. Attach the flush mount sponge to the display unit. 3. Fix the display unit by using six washer hea

ページ12に含まれる内容の要旨

1.2 Mounting the Antenna Unit of MODEL1824C 1.2.1 Mounting considerations When selecting a mounting location for the antenna unit, keep in mind the following points. • Install the antenna unit on the hardtop, radar arch or on a mast on an appropriate platform. (For sailboats, a mounting bracket is optionally available.) It should be placed where there is a good all-round view with, as far as possible, no part of the ship’s superstructure or rigging intercepting the scanning beam. Any obstr

ページ13に含まれる内容の要旨

1.2.2 Mounting procedure 1. Remove the mounting hardware from the bottom of the antenna unit: four each of hex bolts (M10X20), spring washers and flat washers. Save the mounting hardware to use it to fix the antenna unit to the mounting platform later on. Stern Bow Screws two screws on other side Flat washer Spring washer Hex bolt (M10 x 20) Antenna unit, showing location of mounting hardware 2. Construct a platform (wood, steel*, or aluminum) of 5-10 mm (recommended dimension) in thick

ページ14に含まれる内容の要旨

4. The mounting base is fitted with a snap holder, which may be used to hang the cover after removal. Use the hole next to a screw hole inside the cover to hang it. a) Unfasten the snap assy. with the string attached at the holder in the mounting base. b) Unwind the string. c) Attach the snap to a screw hole on the inside of the cover. Note: Do not hang any other objects with the snap. Snap holder Remove and discard the packing material. Antenna unit, inside view 1-6

ページ15に含まれる内容の要旨

GND IF +VOP GND -VOP Vt GND 5. Unfasten the rotation detector cable from the cable clamps, referring to the figure on page 1-10. 1 2 3 6. Unfasten 16 screws ( , and in the figure below) to dismount the shield plate, core case and core case cover. Pan head screws M3x10 2 pcs. 2 Core case cover 3 3 3 2 3 Pan head screws Core case 2 M4x10 5 pcs. 3 Cable clamps 1 1 3 Rotation detector cable 1 1 Shield plate 1 1 1 3 1 Pan head screws 1 M4x8 9 pcs. 1 3 3 3 Caution: Be careful not to pi

ページ16に含まれる内容の要旨

Twist cables here. Attach EMI core. Shrink tube Gasket Radome base 7. Pass the antenna cable with connector through the cable gland, gasket and cable entrance of the antenna unit, and then tighten cable gland. Note 1: Be sure the shrink tube on the antenna cable does not contact the gasket. Note 2: Pinch the gasket tightly and insert it into the cable entrance. Confirm that the slit in the gasket is completely closed after inserting it into the cable entrance. Rubber gasket Gasket Cable

ページ17に含まれる内容の要旨

9. Attach connectors of the antenna cable to the locations shown in the figure below, and then fasten a pan head screw M4x10 to fix shield cable and core case (removed at step 6.) Pan head screws M4x10 9 pcs. J810 J809 (13 pin) (4 pin) J801 (9 pin) Antenna unit, connector location and fixing the shield cable w/core case 10. Put the EMI core on the antenna cable into the core case attached at step 9, with the flat side of the core facing downward. EMI core Core case EMI core, put

ページ18に含まれる内容の要旨

12. Pass the cable from the rotation detector through two cable clamps. Rotation detector Cable clamps Cable tie (Another should be inside.) Antenna unit, clamping the rotation detector cable 13. Follow the instructions on the label inside the mounting base to secure the snap assy. 14. Confirm that the rubber gasket is properly positioned and that the triangle mark on the radome cover is aligned with the triangle mark on the mounting base, then tighten the fixing screws for the cover. Se

ページ19に含まれる内容の要旨

M8 x 20 Mounting plate M8 x 20 Bracket (1) Fixing plate Support plate (2) Bracket (2) Support plate (1) M8 x 20 M4 x 12 (A) Assembling the mounting bracket M10 x 25 (supplied with antenna unit) (B) Fastening antenna to mounting bracket How to assemble and mount the optional mounting bracket 1-11

ページ20に含まれる内容の要旨

1.3 Mounting the Antenna Unit of MODEL1834C 1.3.1 Mounting considerations • See the mounting considerations for the MODEL1824C on page 1-4. • Observe the compass safe distances mentioned in the SAFETY INSTRUCTIONS to prevent deviation of the magnetic compass. 1.3.2 Mounting procedure 1. Open the antenna unit packing box carefully. 2. Unbolt the four bolts at the base of the radome cover to remove the cover. Radome cover Antenna unit The mounting surface must be parallel with the wa


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Furuno NAVNET 1954C 取扱説明書 魚群探知機 88
2 Furuno 1623 取扱説明書 航海用レーダー 496
3 Furuno 1712 取扱説明書 航海用レーダー 91
4 Furuno 1720 取扱説明書 航海用レーダー 299
5 Furuno 1730 取扱説明書 航海用レーダー 47
6 Furuno 1731 取扱説明書 航海用レーダー 76
7 Furuno 1750 取扱説明書 航海用レーダー 24
8 Furuno 1715 取扱説明書 航海用レーダー 168
9 Furuno 1622 取扱説明書 航海用レーダー 200
10 Furuno 1751 取扱説明書 航海用レーダー 51
11 Furuno 1824C-BB 取扱説明書 航海用レーダー 29
12 Furuno 1830 取扱説明書 航海用レーダー 125
13 Furuno 1831 取扱説明書 航海用レーダー 99
14 Furuno 1832 取扱説明書 航海用レーダー 128
15 Furuno 1834C-BB 取扱説明書 航海用レーダー 25
16 ACR Electronics Nauticast 2607 取扱説明書 航海用レーダー 2
17 ACR Electronics Nauticast Y1-03-0203 取扱説明書 航海用レーダー 1
18 ACR Electronics PATHFINDER 2714 取扱説明書 航海用レーダー 5
19 ACR Electronics NAUTICAST Y1-03-0212-1 取扱説明書 航海用レーダー 7
20 ACR Electronics Nauticast 2662 取扱説明書 航海用レーダー 8