Furuno NAVNET 1954C user manual

User manual for the device Furuno NAVNET 1954C

Device: Furuno NAVNET 1954C
Category: Marine RADAR
Manufacturer: Furuno
Size: 4.2 MB
Added : 12/31/2013
Number of pages: 91
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Furuno NAVNET 1954C. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Furuno NAVNET 1954C.

For your convenience

If looking through the Furuno NAVNET 1954C user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Furuno NAVNET 1954C on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Furuno NAVNET 1954C to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Furuno NAVNET 1954C User manual - Online PDF
Advertisement
« Page 1 of 91 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Furuno NAVNET 1954C but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Furuno NAVNET 1954C. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Installation Manual
MARINE RADAR MODEL1824C/1834C/
1934C/1944C/1954C/1964C
COLOR VIDEO PLOTTER GD-1920C
2.4 Wiring the Power Supply Unit (MODEL
SAFETY INSTRUCTIONS......................i
1954C/1964C)................................ 2-6
EQUIPMENT LISTS ..............................ii
SYSTEM CONFIGURATIONS..............iv
3. SETTING UP THE EQUIPMENT ....3-1
3.1 Setting up with the Installation Wizard.
1. MOUNTING ....................................1-1
.................................

Summary of the content on the page No. 2

The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A : FEB. 2005 All rights reserved. Printed in Japan K : MAR. 23, 2011 Pub. No. IME-35430-K (HIMA ) MODEL1804C_GD-1920C *00015180319* *00015180319* **00015180319 00015180319** * 0 0 0 1 5 1 8 0 3 1 9 *

Summary of the content on the page No. 3

SAFETY INSTRUCTIONS WARNING WARNING Do not open the equipment Radio Frequency unless totally familiar with Radiation Hazard electrical circuits and service manual. The radar antenna emits electromagnetic radio frequency (RF) energy which can be Only qualified personnel ELECTRICAL harmful, particularly to your eyes. Never should work inside the SHOCK look directly into the antenna aperture from HAZARD equipment. a close distance while the radar is in operation or expose you

Summary of the content on the page No. 4

EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks Display unit RDP-149 - 1 RSB-0094-075 - MODEL 1824C RSB-0071-057 - MODEL 1834C XN10A-RSB-0070-064 - MODEL1934C, 24 rpm XN10A-RSB-0073-064 - MODEL1934C, 48 rpm XN12A-RSB-0070-059 - 1 MODEL1944C, 24 rpm XN12A-RSB-0073-059 - MODEL1944C, 48 rpm Antenna unit XN12A-RSB-0072-060 - MODEL1954C, 4 ft, 24 rpm XN12A-RSB-0073-060 - MODEL1954C, 4 ft, 48 rpm XN13A-RSB-0072-060 - MODEL1954C, 6 ft, 24 rpm XN12A-RSB-0072-061 - 1 MODEL19

Summary of the content on the page No. 5

(Con’t from next page) Name Type Code No. Qty Remarks Installation For power supply unit of 1954C materials cable VL3P-VV-S2X2C-AA050 CP03-24500 000-080-191 1 cable MJ-B24LPF0009-050 Inst. Mat. CP03-24501 For power supply unit of 1964C cable VL3P-VV-S2X2C-AA050 CP03-30600 000-084-769 1 cable MJ-B24LPF0011-050 Inst. Mat. CP03-30601 SP03-14501 000-844-420 1set Fuses for power supply unit PSU-008 (Model 1964C) SP03-14001 000-080-018 1set Fuses for power supply unit Spare parts PSU-0

Summary of the content on the page No. 6

SYSTEM CONFIGURATIONS All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end. The number of display units which may be installed depends o

Summary of the content on the page No. 7

GPS receiver GP-320B/330B or Weather station * Not required for AIS WS-200 Transponder FA-150 External buzzer AIS Interface AIS transponder VGA monitor IF-1500AIS* Remote display PC Video equipment ARPA ARP-11 Display unit RDP-149 FA-30 HUB AIS RECEIVER Echo sounder Navigator Other NavNet Unit (Model 1834C, etc.) Rectifier Network Facsimile PR-62 Sounder Receiver ETR-6/10N 12 - 24 VDC FAX-30 ETR-30N 100/110/115/220/230 VAC : Standard 1φ, 50/60 Hz : Option : Local supply NavNet system: GD-1

Summary of the content on the page No. 8

Radar Antenna Unit, Radar Antenna Unit, GPS Receiver GP-320B/330B GPS Receiver GP-320B/330B OR OR Weather Station WS-200 Weather Station WS-200 RADAR RADAR or or PLOTTER PLOTTER Radar, plotter data Radar, plotter data Two-unit NavNet system Radar Antenna Unit, Radar Antenna Unit, GPS Receiver GP-320B/330B GPS Receiver GP-320B/330B OR OR Weather Station WS-200 Weather Station WS-200 RADAR RADAR or or PLOTTER PLOTTER Radar data Plotter data HUB Sounder data Sounder data Note: The picture disapp

Summary of the content on the page No. 9

1. MOUNTING NOTICE Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic parts, especially plastic connectors. 1.1 Mounting the Display Unit The display unit can be mounted on a tabletop, on the overhead or flush mounted in a console or panel. Table Top Overhead Hard Cover Tabletop, overhead mounting method 1.1.1 Mounting considerations When selecting a mount

Summary of the content on the page No. 10

1.1.2 Mounting procedure Tabletop, overhead mounting Follow the procedure below to mount the display unit on a tabletop or the overhead. 1. Fix the hanger by using four tapping screws (5x20). 2. Screw knob bolts in display unit, set it to the hanger, and tighten the knob bolts. 3. Attach the hard cover to protect the LCD. Display unit Tapping screws (4 pcs.) Knob bolts (2 pcs.) Hanger Tabletop, overhead mounting of display unit Note: For the overhead mounting, reinforce the mounting l

Summary of the content on the page No. 11

Flush mounting Note: Use supplied pan head screws when the thickness of the bulkhead is from 11 to 14 mm. For bulkhead which exceeds 14 mm in thickness, the length of the pan head screws should be bulkhead thickness (A) plus 7.8±1.2 mm. Also the length of B should be max. 8 mm. B A Fixing screw, side view 1. Prepare a cutout in the mounting location whose dimensions are as shown below. 2. Attach the flush mount sponge to the display unit. 3. Fix the display unit by using six washer hea

Summary of the content on the page No. 12

1.2 Mounting the Antenna Unit of MODEL1824C 1.2.1 Mounting considerations When selecting a mounting location for the antenna unit, keep in mind the following points. • Install the antenna unit on the hardtop, radar arch or on a mast on an appropriate platform. (For sailboats, a mounting bracket is optionally available.) It should be placed where there is a good all-round view with, as far as possible, no part of the ship’s superstructure or rigging intercepting the scanning beam. Any obstr

Summary of the content on the page No. 13

1.2.2 Mounting procedure 1. Remove the mounting hardware from the bottom of the antenna unit: four each of hex bolts (M10X20), spring washers and flat washers. Save the mounting hardware to use it to fix the antenna unit to the mounting platform later on. Stern Bow Screws two screws on other side Flat washer Spring washer Hex bolt (M10 x 20) Antenna unit, showing location of mounting hardware 2. Construct a platform (wood, steel*, or aluminum) of 5-10 mm (recommended dimension) in thick

Summary of the content on the page No. 14

4. The mounting base is fitted with a snap holder, which may be used to hang the cover after removal. Use the hole next to a screw hole inside the cover to hang it. a) Unfasten the snap assy. with the string attached at the holder in the mounting base. b) Unwind the string. c) Attach the snap to a screw hole on the inside of the cover. Note: Do not hang any other objects with the snap. Snap holder Remove and discard the packing material. Antenna unit, inside view 1-6

Summary of the content on the page No. 15

GND IF +VOP GND -VOP Vt GND 5. Unfasten the rotation detector cable from the cable clamps, referring to the figure on page 1-10. 1 2 3 6. Unfasten 16 screws ( , and in the figure below) to dismount the shield plate, core case and core case cover. Pan head screws M3x10 2 pcs. 2 Core case cover 3 3 3 2 3 Pan head screws Core case 2 M4x10 5 pcs. 3 Cable clamps 1 1 3 Rotation detector cable 1 1 Shield plate 1 1 1 3 1 Pan head screws 1 M4x8 9 pcs. 1 3 3 3 Caution: Be careful not to pi

Summary of the content on the page No. 16

Twist cables here. Attach EMI core. Shrink tube Gasket Radome base 7. Pass the antenna cable with connector through the cable gland, gasket and cable entrance of the antenna unit, and then tighten cable gland. Note 1: Be sure the shrink tube on the antenna cable does not contact the gasket. Note 2: Pinch the gasket tightly and insert it into the cable entrance. Confirm that the slit in the gasket is completely closed after inserting it into the cable entrance. Rubber gasket Gasket Cable

Summary of the content on the page No. 17

9. Attach connectors of the antenna cable to the locations shown in the figure below, and then fasten a pan head screw M4x10 to fix shield cable and core case (removed at step 6.) Pan head screws M4x10 9 pcs. J810 J809 (13 pin) (4 pin) J801 (9 pin) Antenna unit, connector location and fixing the shield cable w/core case 10. Put the EMI core on the antenna cable into the core case attached at step 9, with the flat side of the core facing downward. EMI core Core case EMI core, put

Summary of the content on the page No. 18

12. Pass the cable from the rotation detector through two cable clamps. Rotation detector Cable clamps Cable tie (Another should be inside.) Antenna unit, clamping the rotation detector cable 13. Follow the instructions on the label inside the mounting base to secure the snap assy. 14. Confirm that the rubber gasket is properly positioned and that the triangle mark on the radome cover is aligned with the triangle mark on the mounting base, then tighten the fixing screws for the cover. Se

Summary of the content on the page No. 19

M8 x 20 Mounting plate M8 x 20 Bracket (1) Fixing plate Support plate (2) Bracket (2) Support plate (1) M8 x 20 M4 x 12 (A) Assembling the mounting bracket M10 x 25 (supplied with antenna unit) (B) Fastening antenna to mounting bracket How to assemble and mount the optional mounting bracket 1-11

Summary of the content on the page No. 20

1.3 Mounting the Antenna Unit of MODEL1834C 1.3.1 Mounting considerations • See the mounting considerations for the MODEL1824C on page 1-4. • Observe the compass safe distances mentioned in the SAFETY INSTRUCTIONS to prevent deviation of the magnetic compass. 1.3.2 Mounting procedure 1. Open the antenna unit packing box carefully. 2. Unbolt the four bolts at the base of the radome cover to remove the cover. Radome cover Antenna unit The mounting surface must be parallel with the wa


Alternative user manuals
# User manual Category Download
1 Furuno NAVNET 1954C User manual Fish Finder 88
2 Furuno 1623 User manual Marine RADAR 496
3 Furuno 1712 User manual Marine RADAR 91
4 Furuno 1720 User manual Marine RADAR 299
5 Furuno 1730 User manual Marine RADAR 47
6 Furuno 1731 User manual Marine RADAR 76
7 Furuno 1750 User manual Marine RADAR 24
8 Furuno 1715 User manual Marine RADAR 168
9 Furuno 1622 User manual Marine RADAR 200
10 Furuno 1751 User manual Marine RADAR 51
11 Furuno 1824C-BB User manual Marine RADAR 29
12 Furuno 1830 User manual Marine RADAR 125
13 Furuno 1831 User manual Marine RADAR 99
14 Furuno 1832 User manual Marine RADAR 128
15 Furuno 1834C-BB User manual Marine RADAR 25
16 ACR Electronics Nauticast 2607 User manual Marine RADAR 2
17 ACR Electronics Nauticast Y1-03-0203 User manual Marine RADAR 1
18 ACR Electronics PATHFINDER 2714 User manual Marine RADAR 5
19 ACR Electronics NAUTICAST Y1-03-0212-1 User manual Marine RADAR 7
20 ACR Electronics Nauticast 2662 User manual Marine RADAR 8