ページ1に含まれる内容の要旨
LAVAMAT 76825
Washing Machine
User information
ページ2に含まれる内容の要旨
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Programme tables . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Installation and connection instructions. . . . . . . . . . . . . . . . . 26 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 26 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. If the appliance is delivered in the winter months when there are mi- nus temperatures: store the washing machine at room temperature for 24 hours before using for the first time. Correct use The washing machine is only designed for the washing of normal do- mestic laundry at home. Additions or modifications to the washing machine are not permit- ted.
ページ6に含まれる内容の要旨
General safety Repairs to the washing machine may only be carried out by qualified/ authorised service engineers. Never use the appliance when the electrical cable is damaged or the control panel, worktop or plinth area are damaged to such an extent that the inside of the appliance is openly accessible. Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – sw
ページ7に含まれる内容の要旨
Description of the appliance Detergent dispenser Control panel drawer Rating plate (behind door) Plinth flap/ Screw feet Drain pump (height adjustable) Control panel Spin/RINSE HOLD button Multi-display Programme progress display DELAY TIMER button Additional programme DOOR indicator Programme selector buttons START/PAUSE button OVERDOSING indicator 7
ページ8に含まれる内容の要旨
Programme tables Additional programmes Spin speed Programme 2) ENERGY SAVING 7kg COTTONS/LINEN 3) 4) 7kg 95, 60, 40, 30 40-60 MIX 7kg EASY-CARES 4) 3,5kg 60, 50, 40, 30 EASY IRON 40 1kg DELICATES 3,5kg 40, 30 WOOL/SILK H (Hand-washing) 2kg 40, 30, COLD GENTLE RINSE 3,5kg DRAIN SPIN 7kg REFRESH 3,5kg 1) A 10 litre bucket contains approx. 2.5 kg dry washing (cott
ページ9に含まれる内容の要旨
Care Washing types and care symbols 1) symbols Energy-saving programme which washes at 60 °C for lightly to normally soiled M O whites or coloureds made of cotton/linen. J M O Programme for normally to heavily soiled whites/coloureds made of cotton/linen. J M Programme for cottons/linen, which is indicated for various wash temperatures. Items which according to their care label are normally washed separately at 40 °C or at 60 °C, can be washed together in this programme. In this way the dr
ページ10に含まれる内容の要旨
Before the first wash 1. Open the detergent drawer. 2.Pour approx. 2 litres of water through the detergent drawer into the washing machine. This closes the water container when the next programme is started and the economy valve can function properly 3.To remove any production-related residues from the drum and water tank, perform the first wash cycle without a load. Programme: COT- TONS/LINEN 95, press the TIME SAVER button, add approx. 1/4 measur- ing cup of detergent. Preparing and sorti
ページ11に含まれる内容の要旨
Running a wash cycle Opening the door/loading washing 1. Open the door: pull the handle on the door. When the appliance is switched on, the DOOR and START/PAUSE indica- tors show whether the door can be opened: DOOR indicator START/PAUSE indicator Can the door be opened? flashing red or not illumi- illuminated green yes nated yes, after pressing the illuminated green illuminated red START/PAUSE button illuminated red flashing red no, water level and/or or not illuminated or illuminated red te
ページ12に含まれる内容の要旨
hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area. 1. Pull out the detergent drawer as far as it will go. 2. Add the detergent/conditioner. 3. Push the detergent drawer in fully. Stain removal agent/ Washing powder/tablets stain removal tablets for the main wash cycle Washing powder/tablets Conditioner/Wash-care for the pre wash cycle products to preserve the or water softener shape of garments/Starch Washing powder/tabl
ページ13に含まれる内容の要旨
Changing the spin speed/selecting rinse hold The washing machine suggests the maximum permitted spin speed suitable for the selected pro- gramme. You can reduce this spin speed: To do this, press the Spin/RINSE HOLD button repeatedly until the required indicator is illuminated. 3 The spin speed for the final spin can be changed even during the pro- gramme. To do this: 1.Press the START/PAUSE button. 2. Change the spin speed. 3.Press the START/PAUSE button again. RINSE HOLD With RINSE HOLD
ページ14に含まれる内容の要旨
PRE WASH Warm pre-wash before the main wash that follows automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES, without inter- mediate spin for DELICATES. STAIN For heavily soiled or stained washing. Stain removal agent will be rinsed into the wash at the optimum point in the programme. Can only be set for wash temperatures of 40°C and upwards as stain re- movers only become effective at higher temperatures. SENSITIVE Increased effectiveness of the rinse due to the additiona
ページ15に含まれる内容の要旨
Starting a programme 1. Check that the tap is turned on. 2. Select a programme. 3. Press the START/PAUSE button. The programme is started, or will start after the delay timer has counted down. 3 If after pressing the START/PAUSE button E40 flashes in the multi-dis- play, the END indicator flashes 4 times and at the same time an acous- tic signal sounds 4 times, the door has not been correctly shut. Push the door firmly closed and press the START/PAUSE button again. Programme sequence The pr
ページ16に含まれる内容の要旨
End of the wash cycle/removing the washing At the end of the programme, END lights up on the programme progress display. The door can be opened as soon as the DOOR indicator is lit green. 1. Open the loading door and remove the washing. 2. Turn the programme knob to OFF. 3. Close the water valve. 4. After washing, pull out the detergent drawer a little to enable it to dry out. Keep the loading door very slightly open so that the washing ma- chine can air. If RINSE HOLD has been selected: Aft
ページ17に含まれる内容の要旨
Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. 1 Warning! The knob must not be de- pressed after being set, otherwise the child safety device is not acti- vated. The knob must stand out as shown in the illustration. Deactivating the child safety device: Turn the knob in an anti-clockwise direction as
ページ18に含まれる内容の要旨
Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1.Remove the detergent dispenser drawer by pulling it firmly. 2.Remove the conditioner insert from the middle compartment. 3.Clean all parts with water. 4. Put the conditioner insert in as far as it will go, so that it is firmly in place. 5.Clean all parts of the washing ma- chine, especially the nozzles in the top of the washing-in chamber, with a brush. 6. Insert the detergent dispenser draw- er in the
ページ19に含まれる内容の要旨
What to do if... Remedying small faults yourself If during use of the appliance one of the following error codes is shown in the multi-display: – E10 (Problems with the water inflow), – E20 (Problems with the water outflow), – E40 (door open), please consult the following table. After the error has been remedied, press the START/PAUSE button. In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE but
ページ20に含まれる内容の要旨
Problem Possible cause Remedy The transport lock has not Removing the transport lock. been removed. The washing machine vibrates when operating Adjust the feet as described The screw feet not correctly or is not stable. in the installation and con- adjusted. nection instructions. Always load the drum as full Washing has not been Only a few large items of as possible. Mix large and spun. washing in the drum. small items. Screw connection on the in- Screw the inlet hose on let hose is lea
