ページ1に含まれる内容の要旨
®
AIR BRAD NAILER
1-1/4” TO 2-1/2”
Model 39092
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
Fo
ページ2に含まれる内容の要旨
Specifications Item Description Operating Air Pressure 70-125 PSI * Air Consumption 3 CFM (Non-continuous) Magazine Capacity 100 Brads Brad Length Capacity / Gauge Size 1-1/4” to 2-1/2” / 16 Gauge Air Inlet 1/4”-18 NPT Trigger Mechanism Type Contact Safety Trip Mechanism Overall Dimensions 12-1/2” L x 2-5/8” W x 10-1/4” H Tool Weight 5-5/8 Pounds * The air pressure setting must not exceed job site regulations/restrictions. The air pressure setting must not exceed 90 PSI when being us
ページ3に含まれる内容の要旨
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid foot wear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 8. Use eye and ear protection. Always wear ANSI approved impact safety goggles and appropriate hearing protection. We
ページ4に含まれる内容の要旨
ate properly. 15. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. 16. Replacement parts and accessories. This product is to be repaired and ser- viced only by a qualified technician. When this product is serviced, only identical replacement parts should be used. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Ha
ページ5に含まれる内容の要旨
24. Do not fire fasteners too close to the edge of a workpiece. They may split the workpiece and fly free, causing personal injury. 25. Take caution, as some woods contain preservatives such as copper chro- mium arsenate (CCA) which can be toxic. When stapling or nailing these materials extra care should be taken to avoid inhalation and minimize skin con- tact. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contain chemicals known (t
ページ6に含まれる内容の要旨
Operation For best service, you should incorporate an oiler, regulator, and inline filter, as shown in the diagram below. Hoses, couplers, oilers, regulators, and filters are all avail- able at Harbor Freight Tools. Note: For smoother operation and to extend the life-span of the tool, put 3-5 drops of pneumatic tool oil in the attached Air Inlet (6432) before each use. TO BRAD NAILER Testing the Contact Safety Trip Mechanism Warning: Even though the nailer should be empty during this procedu
ページ7に含まれる内容の要旨
stop immediately and have it repaired by a qualified service technician. 7. Hold the tool away or off of the workpiece. The Safety Frame (6459) of the tool should return to its original position. Squeeze the Trigger (6435). The tool should not cycle (fire). If the tool fires, stop immediately and have it repaired by a qualified service technician. 8. Depress the Safety Frame (6459) against the workpiece and squeeze the Trigger (6435). The tool must cycle (fire). Release the Trigger and squ
ページ8に含まれる内容の要旨
Operating the Nailer 1. Attach the Nailer to the air supply at the Quick Connector (6432). Start your compressor and check the pressure making sure it is set at the recommended 70-125 PSI. Do not go over the maximum 100 PSI. 2. Rotate the Deflector (6403) so that the exhaust air blast will be directed away from the operator. 3. To fire, place the Safety Frame (6459) of the Nailer on the workpiece. The Nailer should not fire if the Safety Frame is not depressed. Once depressed, gently and bri
ページ9に含まれる内容の要旨
Anytime any maintenance or repairs are done (including clearing jams), FIRST: 1. Disconnect the Nailer from the air hose. 2. Empty the Magazine (6465) completely. 3. Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon- nected and is incapable of firing any Brads. 4. Always leave the Magazine (6465) open during maintenance. The Magazine is spring loaded, and may cause parts or a Brad to fly out of the Nailer. Clearing Jams 1. Occasionally a Brad may bec
ページ10に含まれる内容の要旨
Anytime any maintenance or repairs are done, FIRST: 1. Disconnect the Nailer from the air hose. 2. Empty the Magazine (6465) completely. 3. Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon- nected and is incapable of firing any nails. 4. Always leave the Magazine (6465) open during maintenance. The Magazine is spring loaded, and may cause parts or a Brad to fly out of the Nailer. Inspection, Maintenance, and Cleaning 1. Inspect the Nailer frequently
ページ11に含まれる内容の要旨
PARTS LIST Part # Description Qty. Part # Description Qty. 6401 Screw 1 6438 O-Ring 1 6402 Spring Washer 1 6439 Guide Sleeve 1 6403 Deflector 1 6440 Box Body 1 6404 Screw 4 6441 Spring Washer 4 6405 Spring Washer 4 6442 Screw 4 6406 Cap 1 6443 Screw 4 6407 Deflector 1 6444 Driver Guide Cover 1 6408 O-Ring 1 6445 Driver Guide 1 6409 Spring 1 6446 Screw 2 6410 O-Ring 1 6447 Screw 1 6411 Valve Piston 1 6448 Nut 1 6412 O-Ring 1 6449 Connecting Plate 1 6413 Gasket Seat 1 6450 Screw 2 64
ページ12に含まれる内容の要旨
ASSEMBLY DIAGRAM Note: 6473 Tool Oil - not shown NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 39092 For technical questions, please call 1-800-444-3353. Page 12
