ページ1に含まれる内容の要旨
DR 4 -TON, ELECTRIC
WOOD SPLITTER
Safety & Operating Instructions
Please read instructions before operating machine
ページ2に含まれる内容の要旨
And congratulations on your purchase of a new DR 4 -Ton WOOD SPLITTER! We have done our utmost to ensure that your DR 4 -Ton WOOD SPLITTER will be one of the most trouble-free and satisfying pieces of equipment you have ever owned. Please let us know of any questions you may have. We want to answer them as quickly as possible. When you do call, please have your order number handy. For technical assistance, please call Toll-Free 1-800-DR-OWNER(376-9637) and one of our Technical S
ページ3に含まれる内容の要旨
Table of Contents Chapter 1: Introducing the DR 4 -Ton WOOD SPLITTER.....................................1 Conventions used in this manual.................................................................................................... 1 Chapter 2: Safety Considerations..........................................................................3 Preparing to Use the DR 4 -Ton WOOD SPLITTER ...................................................................... 3 Safety Information Labels.
ページ4に含まれる内容の要旨
iv DR 4 -Ton WOOD SPLITTER Safety & Operating Instructions
ページ5に含まれる内容の要旨
Chapter 1: Introducing the DR 4 -Ton WOOD SPLITTER This manual will help you set up and safely operate your new DR 4 -Ton WOOD SPLITTER. Careful adherence to the safety and operating instructions in this manual will ensure many years of productive use. Please let us know of any questions you may have. We want to answer them as quickly as possible. When you do call, please have your order number handy. For technical assistance, please call Toll-Free 1-800-DR-OWNER(376-9637) and one of
ページ6に含まれる内容の要旨
2 DR 4 -Ton WOOD SPLITTER Safety & Operating Instructions
ページ7に含まれる内容の要旨
Chapter 2: Safety Considerations Taking the time to read and observe all safety instructions will ensure many years of productive use from your DR 4 -Ton WOOD SPLITTER and help you avoid injury. Please take a few moments to read the following guidelines for safely operating your new machine. Preparing to Use the DR 4 -Ton WOOD SPLITTER Read these Safety & Operating Instructions before you use the DR 4 -Ton WOOD SPLITTER. Become familiar with the controls and service recommendations t
ページ8に含まれる内容の要旨
4 DR 4 -Ton WOOD SPLITTER Safety & Operating Instructions
ページ9に含まれる内容の要旨
Protecting Yourself Always wear protective goggles or a face shield while splitting wood to protect your eyes and face from possible thrown bits of wood. Do not, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the DR 4 -Ton WOOD SPLITTER. Modifications to your machine could cause personal injuries and will void your warranty. Wear shoes with non-slip treads when using your DR 4 -Ton WOOD SPLITTER. If you have safety shoes, we recommend wearin
ページ10に含まれる内容の要旨
Do not put any part of yourself, your clothing, or your personal protective equipment into a crack in a log that is being split; it might close suddenly with great force. Never split anything other than logs free of nails, wires and branches. Maximum log length is 20" with a maximum diameter of 10" for the DR 4 -Ton WOOD SPLITTER. Note: The log diameter does not necessarily indicate the difficulty of the split. A small diameter log can be difficult to split if it has knots or its fibe
ページ11に含まれる内容の要旨
Safety with Electric Powered Machines WARNING! The items listed in this section will help you keep your DR 4 -Ton WOOD SPLITTER running smoothly and, most importantly, prevent injury to yourself or others. Please review them carefully before using your machine. Never open the switch box or motor cover. DO NOT attempt any electrical repairs yourself. If in doubt, consult a qualified electrician or contact Country Home Products’ toll- free support at 1-800-DR-OWNER (376-9637) f
ページ12に含まれる内容の要旨
Hydraulic Safety WARNING! The items listed in this section will help you keep your DR 4 - Ton WOOD SPLITTER running smoothly and, most importantly, prevent injury to yourself or others. Please review them carefully before operating your machine. WARNING! Escaping pressurized fluid from hydraulic system leaks can have enough force to penetrate skin and cause serious injury or death. Hydraulic fluid can remain pressurized while the motor is off due to the return spring
ページ13に含まれる内容の要旨
Chapter 3: Setting Up Your DR 4 -Ton WOOD SPLITTER This chapter outlines a few simple steps you will need to follow to set up your new machine before you use it. It may be helpful to familiarize yourself with the controls and features on your wood splitter by reviewing the picture below before beginning the steps outlined in this chapter. DR 4 -Ton WOOD SPLITTER Controls and Features Operating Handle Assembly Ram Log Guides Wedge Oil Pump Assembly Electric Motor Assembly Elec
ページ14に含まれる内容の要旨
Unpacking the DR 4 -Ton WOOD SPLITTER Tools & Parts Supplied for Assembly: Wheel Frame Assembly (2) Acorn nuts (located on the machine, remove before installing the Wheel Frame Assembly) 13mm/16mm wrench Operating Handle w/knob 10mm/12mm wrench Metal Shears (Side Cutters) Eye Protection Extra hydraulic seal Band WARNING! Wear eye protection when cutting the banding. The banding is under high tension and may snap and strike you when cut. Stand to one side when cu
ページ15に含まれる内容の要旨
Chapter 4: Operating Your DR 4 -Ton WOOD SPLITTER This chapter covers the procedures for operating your new DR 4 -Ton WOOD SPLITTER and also discusses basic operation features. Before Starting the Electric Motor Tools Needed: Adjustable Wrench Small Phillips Screwdriver 1. Inspect the area in which you will be working. ■ Place the wood splitter only on a firm, level, supported surface 2 to 3 feet above the ground. ■ NEVER operate the wood splitter on the ground as there is risk of
ページ16に含まれる内容の要旨
4. Connect the main lead from the wood splitter to a standard electrical, 110-120VAC, grounded power source fused at 15 AMPS. If using an extension cord, it must be 12AWG and less than 33 feet long with a rating of 15 AMPS. Route the cord from the wood splitter to the power source in such a way that safeguards against the cord becoming damaged during the wood splitting session. Be sure to avoid wet conditions. 5. Cycle the ram several times. After cycling, if the ram does not travel to w
ページ17に含まれる内容の要旨
Splitting Safety The DR 4 -Ton WOOD SPLITTER has a ram with 4 tons of force. Note: Always be sure to stand inside the Operator Zone to run the wood splitter (Figure 6). This is the area directly behind your DR 4 -Ton WOOD SPLITTER. Never operate the wood splitter from anyplace else. Operator Zone Handle logs only from the sides, never by the ends. For best splitting results, place log flat on the beam between the Log Guides (Figure 6) with butt end toward hydraulic cylinder ram.
ページ18に含まれる内容の要旨
Operating the DR 4 -Ton WOOD SPLITTER Note 1: For your added safety, this is a TWO HANDED OPERATION wood splitter. The hydraulic control is a single handle valve called the Operating Handle. The ram travels forward only while the Operating Handle is held down and Electric Motor Start Button is depressed. The cylinder automatically completes the return stroke when the Operating Handle is released and Electric Motor Start Button is released. Note 2: Before starting the splitting operation
ページ19に含まれる内容の要旨
How to Free a Jammed Log from the Wedge WARNING! Never place your hands near the log when attempting to free it from the wedge. Never ask for the assistance of another person when freeing a jammed log. Never try to extract the jammed log by hitting it with a tool; this could damage the motor cover and hydraulic pump cover, etc. 1. If you want to stop the wood splitter, first release the Electric Motor Start Button and then release the Operator Handle so t
ページ20に含まれる内容の要旨
16 DR 4 -Ton WOOD SPLITTER Safety & Operating Instructions
