ページ1に含まれる内容の要旨
B150D
Single-Line Business
Speakerphone with CID Display
User’s Guide
CONTACTING TELEDEX
Telephone: +1 (408) 363-3100
Address: 6311 San Ignacio Avenue
San Jose, CA 95119 USA
Internet: www.teledex.com
email: sales@teledex.com
PART NUMBER 600-0480-52
ページ2に含まれる内容の要旨
SAFETY INSTRUCTIONS NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication B150D TELEPHONE DIAGRAM of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. This telephone connects to the tele- DELETE KEY phone network under the connecti
ページ3に含まれる内容の要旨
REQUIREMENTS 3) In certain circumstances, it may be necessary for the telephone company to request information from TABLE OF CONTENTS you concerning the equipment which you have connected to your telephone line. Upon request of the tele- phone company, provide the FCC registration number and the ringer equivalence number of the equipment 1) FEATURES 2 which is connected to your line. This information will be found on the bottom of your telephone. 2) IMPORTANT CALLER ID INFORMATION 3 3) IMPORTANT
ページ4に含まれる内容の要旨
NOTICES AND REQUIREMENTS FEATURES – Use and store the B150D only in normal temperature environments. Extreme FEATURES temperatures can shorten the life of electronic components, and distort or melt Your B150D has these useful features: plastic parts. 99-Memory Caller ID – stores up to 99 Caller ID records – Keep the telephone away from dust and dirt, which can cause premature wearing of parts. 99-Memory Phone Book – stores up to 99 phone book records – Handle the B150D gently and carefully. D
ページ5に含まれる内容の要旨
NOTICES MESSAGE WAITING Release – to re-access the line quickly for another dial tone, without pressing the 24.2 UNMARKING A VIP CALL RECORD hook switch or placing the handset back in its cradle 1) Press the PHONE BOOK key, then repeatedly press either REVIEW key until you see the VIP call record you want to unmark. Volume Control – controls the volume of the handset, headset, speakerphone and ringer 2) Press and hold the STAR (*) key until PRIORITY CALL disappears from the display. The B150
ページ6に含まれる内容の要旨
DELETING CALL RECORDS INSTALLATION number); a 10-digit number (area code plus the phone number); an 11-digit number 4) INSTALLATION (1 plus the area code plus the phone number); a 7-digit number. When installing your B150D, please select a location that is located near an unswitched AC outlet, near a modular phone line jack, and out of the way of If the phone number’s area code does not match the area code you stored, you can activities that may interfere with the telephone’s operation. select
ページ7に含まれる内容の要旨
DATA PORT CALLER ID 21) CALLER ID MESSAGES 5) USING THE DATA PORT The data port is located on the right hand side of the telephone (as it is facing you.) Use this jack to connect a laptop or desktop computer, fax machine or answering DISPLAY READS DESCRIPTION machine in parallel on the same phone line to which the telephone is connected. # TOTAL # NEW Appears as new calls are received. (#) indicates the number of total calls Plug one end of the modular cord into the DATA jack of the B150D, and
ページ8に含まれる内容の要旨
CALLER ID, CALL WAITING SETTING AREA CODES 9) SETTING THE AREA CODE 18) CALLER ID, CALL WAITING Follow these steps to store your home area code: 18.1 CALLER ID 1) Press PRGM. The PROGRAM MODE prompt will appear. Caller ID is a service provided by your telephone company or service provider. When 2) Press DIAL. SET AREA CODE and 000 will appear. The first 0 flashes. you subscribe to this service, the telephone company sends the incoming caller’s tele- 3) Enter the desired area code. phone number (
ページ9に含まれる内容の要旨
FLASH/LINK DELETING DIRECTORY ENTRIES key to scroll upwards. You may place a call to the number on the display 3rd, 2nd, or 1st number stored. Once you have scrolled to the right number, you by either picking the handset or pressing the SPEAKER/HEADSET key. may dial the number by either pressing the SPEAKER/HEADSET key or picking up the 5) Alternately, you may “jump” to a section of your phone book, without handset. Either action will initiate a call to the number in the display. having to scrol
ページ10に含まれる内容の要旨
PHONE BOOK KEYPAD LEGEND – ENTERING TEXT a long beep, and the display will show NUMBER STORED to confirm 11.14 DIALING A MEMORY NUMBER your entry. The current time display will return. To dial a number stored in memory, press the appropriate memory button, then lift the handset or press SPEAKER/HEADSET. NOTES: You will hear a dial tone during most steps of this procedure. The phone does not actually dial the number as you store it, but you may also hear a busy tone or a 11.15 CHAIN DIALING reco
ページ11に含まれる内容の要旨
PHONE BOOK KEYPAD LEGEND – ENTERING TEXT a long beep, and the display will show NUMBER STORED to confirm 11.14 DIALING A MEMORY NUMBER your entry. The current time display will return. To dial a number stored in memory, press the appropriate memory button, then lift the handset or press SPEAKER/HEADSET. NOTES: You will hear a dial tone during most steps of this procedure. The phone does not actually dial the number as you store it, but you may also hear a busy tone or a 11.15 CHAIN DIALING reco
ページ12に含まれる内容の要旨
FLASH/LINK DELETING DIRECTORY ENTRIES key to scroll upwards. You may place a call to the number on the display 3rd, 2nd, or 1st number stored. Once you have scrolled to the right number, you by either picking the handset or pressing the SPEAKER/HEADSET key. may dial the number by either pressing the SPEAKER/HEADSET key or picking up the 5) Alternately, you may “jump” to a section of your phone book, without handset. Either action will initiate a call to the number in the display. having to scrol
ページ13に含まれる内容の要旨
CALLER ID, CALL WAITING SETTING AREA CODES 9) SETTING THE AREA CODE 18) CALLER ID, CALL WAITING Follow these steps to store your home area code: 18.1 CALLER ID 1) Press PRGM. The PROGRAM MODE prompt will appear. Caller ID is a service provided by your telephone company or service provider. When 2) Press DIAL. SET AREA CODE and 000 will appear. The first 0 flashes. you subscribe to this service, the telephone company sends the incoming caller’s tele- 3) Enter the desired area code. phone number (
ページ14に含まれる内容の要旨
DATA PORT CALLER ID 21) CALLER ID MESSAGES 5) USING THE DATA PORT The data port is located on the right hand side of the telephone (as it is facing you.) Use this jack to connect a laptop or desktop computer, fax machine or answering DISPLAY READS DESCRIPTION machine in parallel on the same phone line to which the telephone is connected. # TOTAL # NEW Appears as new calls are received. (#) indicates the number of total calls Plug one end of the modular cord into the DATA jack of the B150D, and
ページ15に含まれる内容の要旨
DELETING CALL RECORDS INSTALLATION number); a 10-digit number (area code plus the phone number); an 11-digit number 4) INSTALLATION (1 plus the area code plus the phone number); a 7-digit number. When installing your B150D, please select a location that is located near an unswitched AC outlet, near a modular phone line jack, and out of the way of If the phone number’s area code does not match the area code you stored, you can activities that may interfere with the telephone’s operation. select
ページ16に含まれる内容の要旨
NOTICES MESSAGE WAITING Release – to re-access the line quickly for another dial tone, without pressing the 24.2 UNMARKING A VIP CALL RECORD hook switch or placing the handset back in its cradle 1) Press the PHONE BOOK key, then repeatedly press either REVIEW key until you see the VIP call record you want to unmark. Volume Control – controls the volume of the handset, headset, speakerphone and ringer 2) Press and hold the STAR (*) key until PRIORITY CALL disappears from the display. The B150
ページ17に含まれる内容の要旨
NOTICES AND REQUIREMENTS FEATURES – Use and store the B150D only in normal temperature environments. Extreme FEATURES temperatures can shorten the life of electronic components, and distort or melt Your B150D has these useful features: plastic parts. 99-Memory Caller ID – stores up to 99 Caller ID records – Keep the telephone away from dust and dirt, which can cause premature wearing of parts. 99-Memory Phone Book – stores up to 99 phone book records – Handle the B150D gently and carefully. D
ページ18に含まれる内容の要旨
REQUIREMENTS 3) In certain circumstances, it may be necessary for the telephone company to request information from TABLE OF CONTENTS you concerning the equipment which you have connected to your telephone line. Upon request of the tele- phone company, provide the FCC registration number and the ringer equivalence number of the equipment 1) FEATURES 2 which is connected to your line. This information will be found on the bottom of your telephone. 2) IMPORTANT CALLER ID INFORMATION 3 3) IMPORTANT
ページ19に含まれる内容の要旨
SAFETY INSTRUCTIONS NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication B150D TELEPHONE DIAGRAM of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. This telephone connects to the tele- DELETE KEY phone network under the connecti
ページ20に含まれる内容の要旨
B150D Single-Line Business Speakerphone with CID Display User’s Guide CONTACTING TELEDEX Telephone: +1 (408) 363-3100 Address: 6311 San Ignacio Avenue San Jose, CA 95119 USA Internet: www.teledex.com email: sales@teledex.com PART NUMBER 600-0480-52
