Summary of the content on the page No. 1
EXAI5180 9/29/03 10:45 AM Page 1
Summary of the content on the page No. 2
EXAI5180 9/17/03 10:19 AM Page 2
Summary of the content on the page No. 3
EXAI5180 9/19/03 5:09 PM Page 3 Plug the AC Note: There are five setup options available. They are Step 1 Checking the Package Contents adapter cord into Caller ID options [Auto Talk, CIDCW (Caller ID on Call the base unit and Waiting), Area Code], Dial Mode and Language. Make sure you have received the following items in then into a 120V the package. If any of these items are missing or D TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS AC outlet. damaged, contact the Uniden Parts Department.
Summary of the content on the page No. 4
EXAI5180 9/17/03 10:19 AM Page 4 Contents Making Calls with the RocketDial 30 Quick Reference Guide 3 Deleting the RocketDial 31 Welcome/Features 5 Caller ID Features Controls and Functions 6 Caller ID and CIDCW (Caller ID on Call Waiting) 32 Getting Started When the Telephone Rings 32 Setting up the Phone 8 Viewing the Caller ID Message List 33 Mounting the Base Unit on a Wall 13 Deleting Information from the Caller ID List 34 Setting Menu Options 15 Using the Caller ID List 36 Basics The Int
Summary of the content on the page No. 5
EXAI5180 9/17/03 10:19 AM Page 5 Congratulations on your purchase of the Uniden cordless phone. This cordless phone is Welcome designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary. As an ENERGY STAR® Partner, Uniden has determined that this product or product models meets the ENERGY STAR® guidelines fo
Summary of the content on the page No. 6
EXAI5180 9/17/03 10:19 AM Page 6 Controls and Functions 1. Handset antenna 2. Beltclip hole 1 3. Optional headset jack 4. Handset battery compartment 5. Handset earpiece 5 6. LCD display 2 7. call id (Caller ID)/menu key 8. vol/ / (volume & scroll) key 6 9. vol/ / (volume & scroll) key call id/menu RocketDial 10. /tone/ (left cursor) key 7 14 3 11. redial/pause key 8 vol 15 12. select key 9 16 13. Handset microphone and ringer speaker 14. RocketDial key 4 15. end key 10 17 redial select delet
Summary of the content on the page No. 7
EXAI5180 9/25/03 9:41 AM Page 7 21. (repeat/rewind) key 22. volume/SELECT (up) key 23. memo/rec (record) key 24. volume/SELECT (down) 38 39 key 28 25. answer on/off key 26. ringer key 27. Base charging contacts 29 28. Base antenna charge in use 30 21 29. charge/in use LED 31 22 memo rec 32 23 30. (play/stop) key volume SELECT 24 33 31. (skip/fast forward) key 25 34 answer on/off greeting MENU/CLOCK 32. (delete) key 26 35 ringer SET find hs 36 33. MENU/CLOCK key mic 37 34. greeting key 27 35
Summary of the content on the page No. 8
EXAI5180 9/17/03 10:19 AM Page 8 Setting up the Phone Do the following steps: A. Choose the best location B. Install the rechargeable battery pack into the handset C. Connect the base unit If your home has specially wired alarm A. Choose the best location equipment connected to Before choosing a location for your new phone, read the INSTALLATION the telephone line, be CONSIDERATIONS included in the PRECAUTIONS. Here are some important guidelines sure that installing the you should consider: s
Summary of the content on the page No. 9
EXAI5180 9/17/03 10:19 AM Page 9 B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. Charge the handset battery pack for at least 15-20 For optimum hours before using your new cordless telephone for the performance use only first time! To maximize the charge capacity of your battery the Uniden BT-800 pack, DO NOT plug the telephone cord into the base un
Summary of the content on the page No. 10
EXAI5180 9/17/03 10:19 AM Page 10 4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. 5) Place the handset in the base unit face forward for 15-20 hours without interruption. The base unit’s LED light (labeled as charge/in use) illuminates once the handset is • Replacement batteries placed in the base. The LED light will illuminate regardless are also available if the battery pack is connected or not. through the Uniden Parts Department at (800
Summary of the content on the page No. 11
EXAI5180 9/17/03 10:19 AM Page 11 Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery appears on the LCD and none of the keys will operate. If the phone is in use, Low Battery flashes and the handset •Even when the beeps. Complete your conversation as quickly as possible and battery pack is not return the handset to the base unit for charging. being used, it
Summary of the content on the page No. 12
EXAI5180 9/17/03 10:19 AM Page 12 C. Connect the base unit Route the cord. 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Set the base on a desk or tabletop, and Use only the supplied place the handset in the base unit. AD-314 AC adapter. Do not use any other AC adapter. 3) Make sure that the charge/in use LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the
Summary of the content on the page No. 13
EXAI5180 9/17/03 10:19 AM Page 13 Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. DO NOT use an AC 1) Snap the wall mount adapter into the notches on outlet controlled by the bottom of the base. a wall switch. 2) Plug the AC adapter into the DC IN 9V jack. 3) Wrap the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 120V AC 7 wall outlet. Wall plate 6 5) Plug the telephone lin
Summary of the content on the page No. 14
EXAI5180 9/17/03 10:19 AM Page 14 Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of the base
Summary of the content on the page No. 15
EXAI5180 9/17/03 10:19 AM Page 15 Setting Menu Options There are five setup options available. They are Caller ID options (AutoTalk, CIDCW [Caller ID on Call Waiting], Area Code), Dial Mode and Language. AutoTalk allows you to answer the phone without pressing the talk/flash button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. If the phone rings when AutoTalk is off, you must press talk/flash to answer the call.
Summary of the content on the page No. 16
EXAI5180 9/17/03 10:20 AM Page 16 1) When the phone is in standby mode, press and hold call id/menu. The Caller ID setting screen appears. 2) Press vol/ / twice to select Area Code. 3) Press select. 4) Use the number keys (0 - 9), or delete/channel to enter the 3-digit area code. 5) Press select. A confirmation tone sounds and the displayed area code is entered. 6) Press end or return the handset to the base unit to complete the setting. The handset returns to standby mode. When the area co
Summary of the content on the page No. 17
EXAI5180 9/17/03 10:20 AM Page 17 1) When the phone is in standby mode, press and hold call id/menu. The following screen appears. 2) Press vol/ / three times to select Dial. 3) Press select to toggle between Tone and Pulse for each setting. 4) Press end or return the handset to the base unit to complete the setting. The handset returns to standby mode. • If you are not sure of your dialing system, set for tone dialing and make a trial call. If the call connects, leave the setting as is. O
Summary of the content on the page No. 18
EXAI5180 9/17/03 10:20 AM Page 18 Making and Receiving Calls Handset On Base Handset Off Base Pick up the handset (AutoTalk: Press talk/flash (AutoTalk: Off), To receive On) or pick up the handset and or press talk/flash, /tone/ , Refer to page 15 a call press talk/flash (AutoTalk: Off). #/ or any number key "Setting Menu Options" (AntoTalk: On). to turn On the AutoTalk 1) Pick up the handset. 1) Press talk/flash. feature if desired. 2) Press talk/flash. 2) Listen for the dial tone. 3) Listen
Summary of the content on the page No. 19
EXAI5180 9/17/03 10:20 AM Page 19 Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone and volume call id/menu RocketDial Press the volume up key or volume down key (labeled as vol/ / or vol/ / ) in standby mode to select one of five ringer tones and volume combinations. vol Earpiece volume Press the volume up key or volume down key (labeled as vol/ / or vol/ / ) during a call to change the earpiece volume of the handset. This setting will remain in effect after the telephone c
Summary of the content on the page No. 20
EXAI5180 9/17/03 10:20 AM Page 20 Redial The redial/pause key redials the last number dialed. The redialed number can be up to 32 digits long. Tone Dialing Switch Over •The tone feature only Some telephone companies use equipment that requires applies when the dial pulse dialing (sometimes referred to as rotary dialing). mode is set to pulse. redial select delete memory If you need to enter tone dialing digits, you can switch pause channel • This special number over to tone dialing during the
