Summary of the content on the page No. 1
HP Photosmart R-series dock
User's Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
HP Photosmart R-series dock Users Manual 3
Summary of the content on the page No. 4
Trademark and copyright information © 2004 Copyright Hewlett-Packard Development Company, LP Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under copyright laws. The information contained in this document is subject to change without notice. Hewlett-Packard shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. Microsoft® and Windows® are
Summary of the content on the page No. 5
Table of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setting Up the Dock . . . . . . . . . . . . . . . . . . . . . . 6 Charging a Spare Battery . . . . . . . . . . . . . . . . . 8 Dock Lights and Buttons . . . . . . . . . . . . . . . . . . . 9 Transferring Images to a Computer Using the Dock . . 10 Printing Images Using the Dock . . . . . . . . . . . . . . . . 11 Displaying Images on a TV Using the Dock . . . . . . . 12 Using the Remote . . . . . . . .
Summary of the content on the page No. 6
Getting Started The HP Photosmart R-series camera dock allows you to easily download images to your computer, print images directly to a printer, recharge the camera battery and a spare battery at the same time, and display images on a television (TV). You can use the dock remote control just as you would use a TV remote control, with the added ability to rotate, magnify, and print images (if the dock is connected to a printer). You can also use the remote control to navigate the camera m
Summary of the content on the page No. 7
2 Connect the TV, AC power adapter, and USB cables to the right-hand side of the dock. 1 23 # Icon Description 1 Connect the dock to a TV using the audio/video cable with the part number C6324-61601. Connect the yellow connector to the video input, and the red connector to the audio input on your TV, VCR, or DVD player. 2 Connect the AC power adapter to the DC IN connector on the dock, plug the power cord into the AC power adapter, and plug the power cord into a wall outlet. If more than
Summary of the content on the page No. 8
3 Remove any cables that may be attached to your camera. Then, insert the camera into the camera dock as shown here. The back of the camera must point toward the edge of the dock with the two buttons. Charging a Spare Battery Insert a spare rechargeable lithium ion battery into the dock recharging bay door with the arrows on the top of the battery (1) pointing toward the door, as shown in the picture. Push the battery into the recharging bay until the slide 2 knob (2) snaps down. (The
Summary of the content on the page No. 9
Dock Lights and Buttons 1 23 4 # Name Description 1Spare Shows the power/battery charging status. If this battery light is: charging ! On - the spare battery in the dock is fully charged light ! Blinking - the spare battery in the dock is charging ! Off - there is no spare battery in the dock, or the battery has been inserted incorrectly 2 Activates the connection to the computer or the printer, depending on which of those devices is Save/Print attached to the dock. If the light above this
Summary of the content on the page No. 10
# Name Description 4Power Shows the power/camera battery charging status. light If this light is: ! On - the camera is in the dock, the dock has power, a spare battery may or may not be in the dock charging bay, and the camera battery is fully charged (or is not rechargeable) ! Blinking - the camera is in the dock, and the battery in the camera is charging ! Off - the dock has no power or there is no camera in the dock Transferring Images to a Computer Using the Dock 1 Confirm the followi
Summary of the content on the page No. 11
3 Press the Save/Print button on the dock. The HP Image Transfer software will launch on your computer. If you have set the software to automatically transfer the images from the camera, the images will automatically transfer to the computer. Otherwise, in the Welcome screen, click Start Transfer. If there were any images on the camera that had been selected for printing or e-mail, those actions are started after the images have been transferred to the computer. 4 When the transfer scre
Summary of the content on the page No. 12
3 Press the Save/Print button on the camera dock to start the print dialog. The Print Setup menu displays on the camera. If you already selected images to print in the camera, the number of images selected will be shown in the Print Setup menu. Otherwise, Images: ALL will be displayed. 4 If all the settings in the Print Setup menu look correct, press the Menu/OK button on the camera or on the dock remote control to begin printing. Or, you can change settings in the Print Setup menu usin
Summary of the content on the page No. 13
TIP If you cannot locate video and audio input jacks on your TV to fit the connectors on the audio/video cable, you should be able to use the video and audio input jacks on a video cassette recorder (VCR) or DVD player connected to your TV. 2 Your camera is set to send either an NTSC or a PAL video signal to a TV, depending on the language you selected when you set up your camera. The NTSC format is used primarily in North America and Japan, and the PAL format is used primarily in Europe
Summary of the content on the page No. 14
Using the Remote You can use the dock remote control to pause the slideshow, magnify an image, rotate an image, select an image for HP Instant Share, or mark an image for printing. Before you can use the remote, you need to install the remote control battery. Remove the battery door on the back of the dock remote control and slide the round non-rechargeable CR 2025 battery into the remote, + (positive) side up, until it clicks into place, as shown in the picture. Then replace the ba
Summary of the content on the page No. 15
Dock Remote Control Buttons 2 1 3 4 7 5 6 8 9 # Button Description 1 Activates the TV connection and displays the first image in the camera on the TV (same as TV button the TV button on the dock). 2 Starts and pauses the slideshow of images on the TV. To resume the slideshow, press this Play/Pause button again. button 3 These buttons work just like the arrow buttons and on your camera. Use the buttons to buttons manually navigate through the slideshow. Since you can view the camera
Summary of the content on the page No. 16
# Button Description 5 Magnifies the image just as you can with the Zoom lever on your camera. Pressing it again Magnify goes to the next magnification level. Use the button arrow buttons to pan around the magnified image. To return to 1x, press the Thumbnail View button. (Magnification has no effect on printing.) 6 Displays a thumbnail view of all images stored in the camera, or returns a magnified image to Thumbnail 1x. Use the arrow buttons to navigate through View button the thumb
Summary of the content on the page No. 17
Technical Support Please refer to your camera User's Manual for support procedures and contact information. Troubleshooting NOTE For additional troubleshooting information, please see the Troubleshooting section in your camera Users Manual. Problem Possible cause Solution The camera Batteries in the Install a rechargeable lithium ion batteries will camera are not battery. Disposable Duracell® CP-1 not charge, rechargeable. batteries are not rechargeable. and the The camera Make sure the c
Summary of the content on the page No. 18
Problem Possible cause Solution The camera The camera is Make sure the camera is inserted batteries will not securely in completely into the dock. not charge, the dock. and the The camera Confirm that the power cord is camera dock does not plugged into the dock. Check that charging have electrical the dock power light blinks when light is off. power. the camera is in the dock. The camera The dock is Connect the USB cable directly to is not connected to one of the USB ports on the back of
Summary of the content on the page No. 19
Problem Possible cause Solution The camera There is a Run the dock functionality test by is not functional unplugging the power cord from recognized problem with the dock, then holding down the by the the dock. two buttons on the front of the dock computer while you plug the power cord when it is in back into the dock, and continue the dock. holding the buttons down. If the dock lights come on in 5 seconds (continued) (blinking or solid), then the dock is fully functional. Cannot The TV
Summary of the content on the page No. 20
Battery Charge Times Where Battery is Average Charge Signal When * Charged Charging Has Time Completed In camera while 4 to 7 hours Power light on dock camera is in dock (depending on turns On camera model) In dock charging 2.5 to 3.5 hours Spare battery light bay on dock turns On *Charging may take a shorter or longer period of time depend- ing on condition and state of discharge of the battery. Battery Safety Precautions Using Lithium Ion Batteries ! Do not disassemble or modify the batter
