Our goal is to provide you with a quick access to the content of the user manual for Haier L20G1-A0. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Haier L20G1-A0.
If looking through the Haier L20G1-A0 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Haier L20G1-A0 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Haier L20G1-A0. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Please read this manual carefully before
using your television and keep this manual
In a good place for future reference.
To users: Thank you for using our LCD-TV. After unpacking, please check that you have the following items: Operating instructions, Remote control, AC- DC adapter, AC wire, and Batteries. Before connecting the LCD-TV and turning the power on, please read this book carefully. Please keep this book for later use. When it was loss of function by electrostatic shock, please switch the on/off button for restoring the function. CONTENT Safety Notice Items.......................
Safety Notice Items Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To insure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; l Please keep the book for later use; l Please comply with the warning instructions on the machine and in this book strictly; l Please comply with
Front Panel Controls 7 7 6 6 5 1 2 3 4 1 2 3 4 5 6 6 7 MENU PR VOL TV/AV 1 3 57 2 4 3 2 4 G1 series D2 series 4 1 2 3 5 4 1 2 3 5 TV/AV MENU VOL- VOL+ CH- CH+ POWER TV/AV MENU VOL- VOL+ CH- CH+ POWER 6 7 7 6 Note: These buttons are on the top of the sets on these two series. Control Panel Function 1. MENU Press to select the main menu 2. VOL (V-/VOL-) Volume down / Left orientation to adjust the item in the OSD VOL (V+/VOL+) Volume u
Connection Options The figure is just for referrence, please see the real.) AV Audio Input D-SUB Input Connect audio/video SCART Input Connect to the D-SUB output from an external Connect to the DVD/ 15PIN analog output device to these jacks VCR/broadcasting connector of the PC receiver or other display card for PC equipment display purpose Earphone port L R DC IN D-SUB IN HEADPHONE PC AUDIO IN SCART S-VIDEO VIDEO AUDIO ANT S-Video Input PC Audio Input Connect S-Video out Conne
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV SLEEP DISPLAY MUTE POWER NICAM PC AUTO AD TV/AV PSM .SS M OK Q.V IEW P+ V- V+ ME NU P- INDEX TEXT SUBCODE MIX TIME HOLD SIZE REVEAL Illustration of the keys on the remote control: 1. POWER Power supply switch MUTE 2. MUTE 3. DISPLAY Display current input signal information 4. 0-9 TV channel number select Set time to change t
Remote Control Key Functions PC-RGB system select 13. PC M 14. SS Select sound mode:VOICE/MUSIC/THEATRE/PERSONAL 28. AUTO AD Auto adjust (PC mode) 15. RED Correspond to the differently colored subjects 16. CYAN 17. GREEN T E 18.YELLOW L 19. TEXT Switch to the Teletext with text mode/turn off Teletext and E switch to TV mode T E Hold on or off for current page display 20. HOLD X T 21. MIX Swi
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Mul
Connection Instructions PC Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC. Then connect the other end to the VGA video interfac
Connection Instructions VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off; Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from t
Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channe
Basic Operating Instructions Turn on the LCD-TV When the POWER button is pressed and the LCD-TV is SLEEP DISPLAY M U TE P O W E R N IC A M P C AUTO AD TV/AV turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned on, the input mode is displayed on the screen. When the LCD-TV is turned off using the power button, the LCD-TV will go into PSM .S S M standby mode and the indicator light turns red. O K Q .V IE W P + Note: TV V- M E N U V+
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1.Press the relevant key on the remote control if you want to choose any channel from 0 to 9. for example: if you want to choose channel 8, just press the key number 0 and 8. Note: You must press 0 first and then the other
TELETEXT Some menu related function are not available in TELETEXT mode. MENU and AUTO AD control functions are not available in TELETEXT mode. If the TV is switched on by POWER after off in TELETEXT mode, or press TV/AV or PC button, the TELETEXT mode will disappear automatically. Teletext features may vary depending on the Broadcasting SLEEP DISPLAY M U T E P O W E R Companies and is only available if the channel selected is N IC A M P C AUTO AD TV/AV transmitting Teletext. Pressing the T
TELETEXT SUBCODE Button When Teletext information exceeds more than one page , it may take some time for the automatic changing of the sub pages to reach the sub page you require . It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found . Select the required page number using buttons 0-9 . If the top of the page indicates that sub pages are being transmitted yet the page does not change . Then the number at the top of the pag
Menu Operations * In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to help you with the TV operation. 1. Press MENU button to either display the PC MENU or TV MENU or VIDEO MENU or GENERAL MENU or AUDIO MENU in different source inputs. 2. Press P+/P- to scroll through the parameters 3. Press V+/V- buttons to make changes to the parameters 4. Press the OK button to exit the menu Picture Menu Options Picture quality can be adjust
Menu Operations Picture Menu Options Continued TV MENU VIDEO MENU BRIGHTNESS 50 CONTRAST 50 COLOR 50 HUE 50 SHARPNESS 50 2. Press P+/P- button to enter the picture menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired pict
Menu Operations Picture Menu Options Continued PHASE : Removes any horizontal distortion and clears or sharpness the displayed characters . CLOCK : Adjust the TFT-LCD to match the PC-RGB input source COLOR : Press V+/V- to adjust the color HUE : Adjust the tone of the picture . Appear and be adjusted only under NTSC mode SHARPNESS : Adjust the amount of the detail enhancement , the image sharpness rises as the number increases (By increasing the level, it will show cleaner and clearer im
Menu Operations Sound Menu Options Continued Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from left to right . When indication value of balance increases toward 100 , sound of the left speaker becomes weaker . When indication value of balance decreases toward 0 , sound of the right speaker become weaker . AUDIO PRESET : Press V+/V- to select between PERSONAL, VOICE, MUSIC and THEATER . TREBLE : Adjust the treble of the sound . Can only b
Menu Operations General Menu Options Continued 1. Press MENU button until the following menu appears on the screen GENERAL MENU LANGUAGE ENGLISH BLUE SCREEN ON NOISE REDUCE OFF INPUT SOURCE TV TXT LANGUAGE PAN EUROPEAN TXT EAST/WEST EAST RESET You can adjust sound options BLUE SCREEN , NOISE REDUCE, INPUT SOURCE
|1||Haier 1509-A||Flat Panel Television||224|
|2||Haier 42EP24STV||Flat Panel Television||89|
|3||Haier 20AL25S||Flat Panel Television||27|
|4||Haier 42HP25SAT||Flat Panel Television||41|
|5||Haier 42EP25BAT||Flat Panel Television||16|