Our goal is to provide you with a quick access to the content of the user manual for Toshiba 40FT2U. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Toshiba 40FT2U.
If looking through the Toshiba 40FT2U user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Toshiba 40FT2U but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Toshiba 40FT2U. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Integrated High Deﬁnition
The model number and serial number are on the back
For an overview of steps for setting up your new TV, see page 10.
of your TV. Record these numbers in the spaces below.
Note: To display a High Deﬁnition picture, the TV must be receiving
Refer to these numbers whenever you communicate
a High Deﬁnition signal (such as an over-the-air High Deﬁnition
with your Toshiba deal
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This CHILD SAFETY: manual will help you use the many exciting features It Makes A Difference How and Where You Use Your Flat of your new LCD TV. Before operating your LCD TV, Panel Display please read this manual completely, and keep it nearby for future reference. Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: Safety Precautions The Issue WARNING: TO REDUCE THE RISK OF FIR
NEVER allow your body to come in contact with any • Important Safety Instructions broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic 1) Read these instructions. liquid. If the liquid comes in contact with your mouth 2) Keep these instructions. or eyes, or your skin is cut by broken glass, rinse the 3) Heed all warnings. affected area thoroughly with water and consult your 4) Follow all instructions. doctor. ALWAYS contact a servi
24) To avoid damage to this product, never place or store 33) DANGER: RISK OF SERIOUS the TV in direct sunlight; hot, humid areas; or areas PERSONAL INJURY OR DEATH! subject to excessive dust or vibration. Use extreme care to make sure you are never in • 25) Always place the TV on the floor or a sturdy, level, a position where your body (or any item you are stable surface that can support the weight of the unit. in contact with, such as a ladder or screwdriver) To secure the TV, use a
40) During normal use, the TV may make occasional Choosing a location for your LCD TV snapping or popping sounds. This is normal, To Display your LCD TV on the included especially when the unit is being turned on or off. Pedestal Stand: If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Observe the following safety precautions: Authorized Service Provider. 1) Read and Follow the pedestal assembly instructions 41) included with the pedestal. DANGER:
TV Size Hole Pattern(HxV) Screw Size 32” 200x200 mm M6 40” 200x200 mm M6 (unit in mm) Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2) Remove the four screws shown in the below diagram. This will allow removal of the pedestal stand. 3) Once
FCC Declaration of Conformity Important notes about your Compliance Statement (Part 15): LCD TV Toshiba 32DT2U, 32DT2UL and 40FT2U Television The following symptoms are technical limitations of LCD Display technology and are not an models comply with Part 15 of the FCC rules. indication of malfunction; therefore, Toshiba is Operation is subject to the following two conditions: not responsible for perceived issues resulting from (1) This device may not cause harmful interference, and these
Contents Adjusting the audio ............................................................ 37 Important Safety Instructions ............................ 3 Muting the sound ............................................................ 37 Installation, Care, and Service .......................... 3 Using the digital audio selector ...................................... 37 Chapter 1: Introduction ................................... 9 Selecting stereo/SAP broadcasts ...................................
Chapter 1: Introduction Features of your new TV The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV: Integrated digital tuning (8VSB ATSC and • QAM) eliminates the need for a separate digital converter set-top box (in most cases). 1366 x 768 output resolution • (32DT2U / 32DT2UL). 1920 x 1080 output resoluation (40FT2U). ® HDMI digital, high-definition multimedia • interfaces 1080p input support ( page 16). ® One set of Col
10 Program channels into the TV’s channel memory Overview of steps for installing, ( page 24). setting up, and using your new TV 11 For details on using the TV’s features, see Chapters 6 and 7. Follow these steps to set up your TV and begin using 12 For help, refer to Chapter 8: Troubleshooting. its many exciting features. 13 For technical specifications and warranty information, see Chapter 9. Carefully read the important safety, installation, 1 care, and service information. Keep this
Chapter 1: Introduction TV front and side panel controls and connections Models 32DT2U, 32DT2UL, and 40FT2U are used in this manual for illustration purposes. Left side panel TV front TV top 3 7 4 8 5 9 6 10 2 1 7無 CHANNEL pq — When no menu is on-screen, 1無 Green LED these buttons change the channel (programmed Power LED (Green) = Power indicator channels only; page 25). 2無 Remote sensor (embedded) — Point the remote control toward this remote sensor ( “Remote 8無 VOLUME tu — When no menu
Chapter 1: Introduction TV back panel connections For an explanation of cable types and connections, see pages 13–19. 1 TV back 2 3 4 Power Cord 6 5 ® 1無 PC IN — For use when connecting a personal 6無 VIDEO / COLORSTREAM HD IN — These computer. include standard A/V connections ( page 15). ® These are switched by AV input mode — High-Definition Multimedia 2無 HDMI IN ( page 26). Interface input receives digital audio and uncompressed digital video from an HDMI Note: Component / Standard (co
Chapter 2: Connecting your TV Coaxial digital audio cable Overview of cable types Cables can be purchased from most stores that sell audio/ Coaxial digital audio cable is for connecting receivers video devices. Before purchasing any cables, be sure of with Dolby Digital or PCM (pulse-code modulation) connector types required by your devices and the length digital audio input to the TV’s DIGITAL AUDIO OUT of each cable. terminal ( page 18). Coaxial cable (F-type) Analog RGB (15-pin) compute
Chapter 2: Connecting your TV Connecting a VCR, Antenna, Cable TV, or Camcorder From Cable TV From Cable TV or antenna Camcorder Cable box AUDIO VIDEO OUT IN L CH 3 CH 4 OUT R TV back panel Stereo VCR VIDEO AUDIO L R IN from IN CH 3 ANT CH 4 OUT OUT to TV L R Standard Standard A/V cables audio cable Coaxial cable input source on the TV .* T une the TV to channel 3 or You will need: 4 (whiche v er channel the Cable box output is set to). Coaxial cables • Use the Cable box controls to c
Chapter 2: Connecting your TV ® Connecting a DVD player with ColorStream (component video), a VCR, and a satellite receiver From antenna From satellite dish TV back panel Stereo VCR Standard audio AUDIO VIDEO AUDIO cable L R OUT L Y PB PR IN IN from ANT CH 3 CH 4 COMPONENT VIDEO VIDEO R Satellite S-VIDEO OUT OUT IN OUT to TV OUT L R Component video cable Coaxial cable Satellite receiver with component video or DVD player with component video Standard A/V cables You will need: To view ante
Chapter 2: Connecting your TV To connect a DVI device, you will need: ® Connecting an HDMI or DVI One HDMI-to-DVI adapter cable • device to the HDMI input − For proper operation, the length of an HDMI- to-DVI adapter cable should not exceed 9.8 ft The HDMI input on your TV receives digital audio (3m). The recommended length is 6.6 ft (2m). and uncompressed digital video from an HDMI • One 3.5mm stereo to RCA Y-cable source device, or uncompressed digital video from a − An HDMI-to-DVI ada
Chapter 2: Connecting your TV ® REGZA-LINK connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you ® connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see page 46. TV back panel Playback device ® Audio receiver (REGZA-LINK DVD player, etc.) Playback device ® (REGZA-LINK DVD player, etc.) To connect an Audio Receiver and Playback Before controlling the device(s): Devices, yo
Chapter 2: Connecting your TV Note: Connecting a digital audio system Some audio systems may not be compatible • with Dolby Digital bitstream signals. Older The TV’s DIGITAL AUDIO OUT terminal outputs a audio systems that are not compatible with ® * Dolby Digital or 2-channel down-mixed standard digital out signals may not work PCM (Pulse-Code Modulation) signal for use with properly, creating a high noise level that ® an external Dolby Digital decoder or other external may damage sp
Chapter 2: Connecting your TV Note: (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 56. The PC audio input terminals on the TV are shared • with the HDMI-1 analog audio input terminals ( Note: page 43). The edges of the images may be hidden. • Some PC models cannot be connected to this TV. • If receiving a 480i (HDMI), 480p (HDMI), 720p, • An adapter is not needed for computers with a 1080i, or 1080p signal program, Native mode
Chapter 3: Using the remote control Installing the remote control Remote control effective range batteries For optimum performance, aim the remote control directly at the TV and make sure there is no Remove the battery cover from the back of the 1無 obstruction between the remote control and the TV. remote control. Squeeze tab Point remote control toward and lift cover. remote sensor on front of TV. Install two “AAA” size batteries, making sure to 2無 match the + and – signs on the batteri
|1||Toshiba 14DL74||Flat Panel Television||273|
|2||Toshiba 15DL75||Flat Panel Television||57|
|3||Toshiba 15DLV16||Flat Panel Television||25|
|4||Toshiba 15CV100U||Flat Panel Television||32|
|5||Toshiba 15DL72||Flat Panel Television||14|