Summary of the content on the page No. 1
User Guide
Self Contained Wireless Alarm System v1.0
N11427
WARNING: This manual contains information on limitations regarding product use and
function and information on the limitations as to liability of the manufacturer.
The entire manual should be carefully read.
Summary of the content on the page No. 2
Equipment Maintenance Facility FCC COMPLIANCE STATEMENT If trouble is experienced with this equipment (SCW9047/SCW9045) for CAUTION: Changes or modifications not expressly approved by Dig- repair or warranty information, contact the facility indicated below. If the equipment is causing harm to the telephone network, the Telephone ital Security Controls could void your authority to use this equipment. Company may request that you disconnect the equipment until the prob- This equipment has been te
Summary of the content on the page No. 3
Table of Contents About Your Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Fire Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 M
Summary of the content on the page No. 4
Reference Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Access Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Sensor / Zone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Guidelines for Locating Smoke Detec
Summary of the content on the page No. 5
About Your Security System Your Security System has been designed to provide you with the greatest possible flexibility and con- venience. Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be equally instructed in its use. Fill out the “System Information” page with all of your zone information and access codes and store this manual in a safe place for future refer
Summary of the content on the page No. 6
Controls & Indicators IMPORTANT NOTICE A security system cannot prevent emergencies. It is only intended to alert you and – if included – your central station of an emergency situation. Security systems are generally very reliable but they may not work under all conditions and they are not a substitute for prudent security practices or life and property insurance. Your security system should be installed and serviced by qualified security profes- sionals who should instruct you on the level of
Summary of the content on the page No. 7
Night Arming To fully arm the system when it has been armed in Stay Mode, press at the keypad. All inte- rior zones will now be armed except for devices programmed as Night Zones. Night zones are only armed in Away mode, this permits limited movement within the premises when the system is fully armed. Ensure that your installer has provided you with a list identifying zones pro- grammed as night zones. When the interior zones have been activated (i.e., ) you must enter your access code to dis-
Summary of the content on the page No. 8
Remote Arming and Disarming The system can be armed and/or disarmed (if programmed by the installer) using a remote control device (wireless key). When arming the system by using the Arm button on the wireless key, the system will acknowledge the command by sounding a single bell squawk and when disarming using the Dis- arm button on the wireless key the system will acknowledge the command by sounding two bell squawks . Three squawks heard when disarming with the disarm button indicates that th
Summary of the content on the page No. 9
bypassed when arming your system. Zones cannot be bypassed once the system is armed. Bypassed zones are automatically cancelled each time the system is disarmed and must be bypassed again, if required, before the next arming. Bypassing Zones With the system disarmed. 1. Press to enter the function menu. The keypad will display “Press for < > Zone Bypass”. 2. Press or , then your [access code] (if required). The keypad will display “Scroll to < > Bypass Zones”. 3. Enter the two-digit number
Summary of the content on the page No. 10
To select a Bypass Group when arming the system: 1. Press , then your [access code] (if necessary). 2. Press . The next time the system is armed, the zones in this group will be bypassed. 3. To exit bypassing mode and return to the Ready state, press . NOTE: A Bypass Group is only recalled if the system is armed/disarmed after programming the by- pass group. NOTE: This feature is not to be used in UL Listed installations. Trouble Conditions When a trouble condition is detected, the Trouble ( )
Summary of the content on the page No. 11
Access Code Programming In addition to the Master Access Code, you can program up to 16 additional User Access codes. Press , plus your Master Access Code, the armed ( ) indicator will turn on. Enter the 2-digit number to be programmed (i.e. 06 for user access code 6; enter 40 for the Master Access Code) or use the keys to find the specific code and press to select. Enter the new 4 -digit access code. When programming is complete, enter another 2-digit code to program or press to exit. The a
Summary of the content on the page No. 12
Bell Squawk Attribute This attribute is used to determine whether an access code should generate an arming/disarming Bell Squawk upon entry of the code for Away arming. The Wireless Keys with access codes associated with them may generate Arming/Disarming Bell squawks. If desired, this option may be used with codes that are manually entered. Please contact your installer to have this programmed. NOTE: The Master Code cannot use the Bell Squawk attribute, but is required to enable it for other c
Summary of the content on the page No. 13
2. Use the keys to scroll to Buzzer Control. 3. There are 21 different levels, use the keys to scroll to the desired level. Viewing the Event Buffer The event buffer will show you a list of the last 128 events that have occurred on your system. 1. Press [Master Code]. 2. To select Event Buffer viewing, press . 3. The keypad will display the event number and the time and date. Press to switch between this information and the event details. 4. Use the keys to scroll through the events in
Summary of the content on the page No. 14
Reference Sheets Fill out the following information for future reference and store this guide in a safe place. System Information Enabled? [F] FIRE [A] AUXILIARY [P] PANIC The Exit Delay Time is _______ seconds. The Entry Delay Time is _______ seconds. For Service Central Station Information Account#: ___________________ Telephone#: __________________ Installer Information: Company: ___________________ Telephone#: __________________ If you suspect a false alarm signa
Summary of the content on the page No. 15
Sensor / Zone Information Sensor Protected Area Sensor Type Sensor Protected Area Sensor Type 01 18 02 19 03 20 04 21 05 22 06 23 07 24 08 25 09 26 10 27 11 28 12 29 13 30 14 31 15 32 16 33 17 34 11
Summary of the content on the page No. 16
Guidelines for Locating Smoke Detectors Research has shown that all hostile fires in homes generate smoke to a greater or lesser extent. Experiments with typical fires in homes indicate that detectable quantities of smoke precede detectable levels of heat in most cases. For these reasons, smoke alarms should be installed out- side of each sleeping area and on each storey of the home. The following information is for general guidance only and it is recommended that local fire codes and regulation
Summary of the content on the page No. 17
Household Fire Safety Audit Read this section carefully for important information about fire safety. Most fires occur in the home. To minimize this danger, we recommend that a household fire safety audit be conducted and a fire escape plan be developed. 1. Are all electrical appliances and outlets in a safe condition? Check for frayed cords, overloaded lighting circuits, etc. If you are uncertain about the condition of your electrical appliances or household service, have a professional evalu
Summary of the content on the page No. 18
14
Summary of the content on the page No. 19
NOTES:
Summary of the content on the page No. 20
WARNING Please Read Carefully Note to Installers ■ Motion Detectors This warning contains vital information. As the only individual in contact Motion detectors can only detect motion within the designated areas as with system users, it is your responsibility to bring each item in this warn- shown in their respective installation instructions. They cannot discrimi- ing to the attention of the users of this system. nate between intruders and intended occupants. Motion detectors do not System Failu
