Summary of the content on the page No. 1
IN STALLAT I O N
®
Endura
NVR5100 Series
Network Video Recorder
C1621M-E (9/08)
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
List of Illustrations 1 Major Package Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Hard Drive Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3 Accessory Pack . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Summary of the content on the page No. 6
Description The NVR5100 Series network video recorder (NVR) represents a new generation of flexibility and integration for network-based video system ® recording. It is one of the recording components of Endura , Pelco’s most advanced integrated video security system. The NVR represents the state of the art in scalability, performance, expandability, and reliability. It is ideally suited for mission-critical, enterprise surveillance applications. The NVR5100 Series recorder is capable of cont
Summary of the content on the page No. 7
MODELS Internal Video Models Streams* Drives Storage Storage † NVR5124-1500 24 6 1.5 TB 1.16 TB † NVR5124-3000 24 6 3.0 TB 2.32 TB NVR5124-6000 24 12 6.0 TB 4.65 TB NVR5124-9000 24 12 9.0 TB 6.98 TB † NVR5148-1500 48 6 1.5 TB 1.16 TB † NVR5148-3000 48 6 3.0 TB 2.32 TB NVR5148-6000 48 12 6.0 TB 4.65 TB NVR5148-9000 48 12 9.0 TB 6.98 TB *Simultaneous full frame rate/full resolution input streams. † All six-drive models include six empty hard drive carriers. OPTIONAL ACCESSORIES SEB5100 Series Eac
Summary of the content on the page No. 8
Before You Begin Endura is a network system that requires a continuous amount of bandwidth to transmit true, live video. Therefore, always include your network administrator when planning and installing Endura components. You will also need the following items: • Pelco-approved Endura certification • Access to an Endura network – that is an active, Gigabit Ethernet network that supports the full Internet Protocol suite, – that is configured with at least one Endura system manager, and – that is
Summary of the content on the page No. 9
USER-SUPPLIED PARTS In addition to the standard tools and cables required for a video security installation, you will need to provide the following items: Qty Description 1 Cat5e (or better) cable and connectors for connecting the NVR5100 to the Endura network 1 Power source (110/220 VAC) 1 Small flat-tip screwdriver, if mounting the unit into a rack 1 Small Phillips screwdriver, if mounting the unit into a rack You also need to provide all network equipment, such as switches, for the Endura net
Summary of the content on the page No. 10
PACKAGE CONTENTS The following diagrams show the contents of the three boxes. When installing the NVR5100, refer to these diagrams. SHIPPING BOX NVR5100 ACCESSORY PACK HARD DRIVE PACK SAFETY INSTRUCTIONS INSTALLATION MANUAL HARD DRIVE INSERT Figure 1. Major Package Components HARD DRIVE INSERTS HARD DRIVE PACK - OR - DRIVE 1 - DRIVE 12 DRIVE 1 - DRIVE 6 (12-DRIVE MODELS) DRIVE CARRIER 7 - DRIVE CARRIER 12 (6-DRIVE MODELS) Figure 2. Hard Drive Pack 10 C1621M-E (9/08)
Summary of the content on the page No. 11
ACCESSORY PACK USA STANDARD EUROPEAN UK POWER CORD STANDARD POWER STANDARD POWER (110 VAC) CORD (220 VAC) CORD (250 VAC) 2 EA. 2 EA. 2 EA. SHOWN ACTUAL SIZE PHILLIPS PAN HEAD SCREW, 8-32 X 0.375-INCH DISPOSABLE RUBBER FEET FRONT BEZEL KEY RACK MOUNT KIT 5 EA. 5 EA. 2 EA. WRIST STRAP (INSTALLED) (INSTALLED) 1 EA. Figure 3. Accessory Pack REAR MOUNT RAIL 2 EA. FRONT MOUNT RAIL 2 EA. RACK MOUNT KIT CHASSIS MOUNTING BRACKETS SHOWN ACTUAL SIZE PHILLIPS PAN PHILLIPS TRUSS PHILLIPS FLAT PHILLIP
Summary of the content on the page No. 12
INTEGRATION AND APPLICATION SCENARIO This section illustrates a potential application scenario featuring the NVR5100 Series NVR. Figure 5 shows a subnetted, enterprise-wide security system that integrates devices at different geographical locations. WS5050 SM5000 VCD5000 GIGABIT SWITCH KBD5000 VLAN2 VLAN3 VLAN1 GIGABIT SWITCH GIGABIT SWITCH GIGABIT SWITCH UP TO 48 UP TO 48 UP TO 48 ENCODERS ENCODERS ENCODERS NVR5100 GIGABIT SWITCH NVR5100 NVR5100 1 SEB5100 SEB5100 SEB5100 8 SEB5100 Figure 5. En
Summary of the content on the page No. 13
Equipment Placement and Rack Mounting The NVR5100 can be placed on a flat surface, such as a desktop, or mounted in an equipment rack. UNPACKING THE NVR5100 The NVR5100 recorder ships with two smaller boxes as shown in Figure 6: one contains the hard drive pack, the other contains the accessory pack. WARNING: Due to the unit’s weight and size, do not unpack the NVR5100 alone. Two people are required to unpack and lift the unit. SAFETY INSTRUCTIONS INSTALLATION MANUAL HARD DRIVE PACK ACCESSORY
Summary of the content on the page No. 14
3. Peel away the backing of the small label and attach it to this installation manual, other product documentation, or an unobscured product location. PRODUCT LABEL Figure 7. Product Serial Number Label DESKTOP INSTALLATION WARNING: Do not place the NVR5100 on its side; in this position, the unit is likely to fall over and may cause equipment damage or personal injury. To install the NVR5100 on a desktop: 1. Make sure the rubber feet are installed on the unit to prevent surface damage. If no
Summary of the content on the page No. 15
RACK MOUNTING The NVR5100 mounts into an industry-standard 19-inch (48 cm) equipment rack. The NVR5100 occupies three rack units (5.25 in. or 13.3 cm) of vertical rack space. The hardware necessary to mount the NVR5100 into a rack is supplied with the unit. The rack must meet the following requirements: • 19-inch (48 cm) EIA-310-D compliant (rear column required) • Rack column depth: 24 to 30 inches (61 to 76 cm) • Column mounting hole provisions: 10-32 UNF-2B threaded holes or square window ho
Summary of the content on the page No. 16
2. Remove the rubber feet from the underside of the unit if they are attached. 3. Attach one front-mount rail to one rear-mount rail. Make sure the rails are mounted back to back, as shown in Figure 10. Depending on rack depth, use either three or four 8-32 x 0.375-inch Phillips truss head screws for each rail set. Leave the screws loose until step 10. (4) SCREWS 8-32 X 0.375-INCH PHILLIPS TRUSS HEAD Figure 10. Assembling a Support Rail 4. Repeat step 3 for the other rail set. 5. If you are in
Summary of the content on the page No. 17
6. Attach one support rail assembly to the equipment rack in the desired location (refer to Figure 12): NOTE: The support rail assemblies are identical and may be used on either the right or left side of the rack. a. Position the ear of the front-mount rail against the front of the equipment rack. Align the top and bottom holes in the ear of the rail with the threaded holes (or cage nuts) in the rack. b. Using two 10-32 x 0.5-inch Phillips flat head screws, attach the ear of the rail to the fro
Summary of the content on the page No. 18
8. Attach one rack rail spacer to the front of the equipment rack (refer to Figure 13): a. Position the bottom hole of the spacer above the ear of the front-mount rail. b. Insert two 10-32 x 0.5-inch Phillips flat head screws into the spacer, one in the top hole and one in the bottom hole. Leave the middle hole empty; the top thumbscrew on the NVR5100 will use it. c. Tighten the two screws to secure the spacer to the rack. (2) SCREWS 10-32 X 0.5-INCH PHILLIPS FLAT HEAD SPACER Figure 13. Attach
Summary of the content on the page No. 19
12. After the unit is in place, tighten the two thumbscrews to secure the unit to the rack. THUMBSCREW Figure 15. Tightening the Thumbscrews C1621M-E (9/08) 19
Summary of the content on the page No. 20
Hard Drive Array Installation The NVR5100 stores data using RAID (Redundant Array of Independent Disks) technology. All NVR5100 Series recorders operate in a RAID 5 configuration to maximize fault tolerance and enhance disk-access performance. The unit incorporates two RAID controllers, each managing an independent storage array of six drives. If a drive fails, the unit continues operating and signals the operator that a drive failed and should be replaced. INSTALLING HARD DRIVE CARRIERS After
