Summary of the content on the page No. 1
DVC-1000
TM
i2 eye
(Patent Pending)
Broadband VideoPhone
Manual
v2.0
Building Networks for People
Summary of the content on the page No. 2
Contents Introduction ................................................................................................... 3 Package Contents......................................................................................... 4 Features & Benefits ...................................................................................... 5 Connections ................................................................................................. 5 LEDs ..........................................
Summary of the content on the page No. 3
Introduction Imagine having high-quality, extremely low-cost video conferencing from a stand- TM alone, easy to use communication appliance. The D-Link i2eye DVC-1000 TM Broadband VideoPhone accomplishes this. D-Link i2eye introduces the world of video conferencing over the Internet, to bring you and your family, friends and colleagues together, in real time, anytime! The previously complicated TM process of conducting a video conference is simplified with the i2eye DVC- 1000. Since the DVC-1
Summary of the content on the page No. 4
Package Contents TM n D-Link i2eye DVC-1000 Broadband VideoPhone n Power Adapter n Instruction Manual n Quick Installation Guide n Remote Control n Standard Composite RCA Audio / Video Cable n Cat 5 RJ-45 Ethernet Cable Note: Using a power supply with a different voltage than the one included with the DVC-1000 will cause damage and void the warranty for this product. System Requirements n Connection to broadband Internet (Cable modem, DSL modem,T-1 or Ethernet network) at each end of the conn
Summary of the content on the page No. 5
Features & Benefits n Stand-alone operation - No computer needed n Uses broadband cable/DSL or network connections for high-quality video n H.323 Internet video-conferencing standard compliant n Easy to use n Use your existing broadband network n Easy Setup Wizard n Picture-in-Picture view or full-screen view n Remote control included n Speed Dialing n Advanced video and audio privacy protection n Built-in Caller ID n Auto mapping of IP Address n Answer incoming calls using telephone or remote c
Summary of the content on the page No. 6
LEDs TM LED stands for Light-Emitting Diode. The i2eye DVC-1000 has the following LEDs for monitoring its operation. i2 eye Status Power Call Monitor Activity Link Status LED LED Location and Activity Power Front, far right. TM A green light indicates the i2eye DVC-1000 is ON. Front to the left of the power light. This light turns on briefly Status at power up. It is then off during normal operation. Call Front, left side of lens. Steady red light indicates video is Monitor being sent. Bac
Summary of the content on the page No. 7
Getting Started BEFORE YOU BEGIN! Read Using the DVC-1000 with Routers, Gateways or Broadband Modems on page 33 in this manual if you are using the DVC-1000 VideoPhone with a Router, Gateway or Broadband Modem. The DVC-1000 needs to be set-up before use. Use the Quick Installation Guide (included with the DVC-1000) to perform the hardware instal- lation. Each cable (video, audio, Ethernet and AC power) supplied for the i2eye TM has a different color on the end that connects to the DVC-1000. P
Summary of the content on the page No. 8
Remote Control Layout When a numeric Use the arrow keys along input is required, with the ENTER, CANCEL (e.g., a tele- and number keys to enter phone number or information in the Setup IP Address) Wizard screen. enter it directly by pressing the number keys. The * (asterisk--sometimes called a “star” key) is used to enter a “.” (period also called Number sign a “dot”.) When entering alphanumeric Cancel information, the left arrow key performs a backspace, ENTER key deleting the character to the
Summary of the content on the page No. 9
Using the On-Screen Keyboard The DVC-1000 uses a keyboard that appears on-screen to enter words or al- phanumeric characters into the Setup Wizard screens. When the cursor is located in a setup screen that requires characters to be entered, press the ENTER key to bring up the on-screen keyboard. The keyboard will only appear if the cursor is located in an area of the screen that allows text or numbers to be entered. To enter text use the arrow keys on the remote control to move the cursor to the
Summary of the content on the page No. 10
Using the Setup Wizard The following descriptions of the Setup Wizard screens will help you understand the purpose and procedures for providing the required information. Welcome Screen The first screen that displays on the initial startup is the Wecome Screen. This screen explains what information is needed to complete the setup and also explains how to use the remote control to navigate through the Setup Wizard. Press ENTER on the remote control to continue to the next screen. Personal Inform
Summary of the content on the page No. 11
Using the Setup Wizard (continued) Network Address Screen The Network Address screen asks for information that is needed to connect a VideoPhone call over the Internet. Most home users with a cable or DSL modem can leave the checkbox checked to obtain an IP Address automatically. If you know you cannot be assigned an IP Address automatically through a DHCP server, then uncheck the checkbox and enter your IP Address, Subnet mask and Gateway. Obtain an IP Address automatically (Default) The applic
Summary of the content on the page No. 12
Using the Setup Wizard (continued) DNS (Domain Naming System) Screen If you entered an IP address in the Network Address screen (described on the previous page) you will see the screen for setting DNS server addresses. The DNS screen asks for information regarding the Domain Name System (DNS) server. You should be able to get both of these settings from your router configuration settings, ISP or your network administrator. Only the primary DNS server address is required, though it is best to hav
Summary of the content on the page No. 13
Using the Setup Wizard (continued) System Restart A warning message now appears asking to restart the DVC-1000 VideoPhone to complete the setup. Press the Yes button to accomplish a restart. Congratulations! You are now ready to make and receive i2eye VideoPhone calls. Using a Telephone with the DVC-1000 Although optional, it is recommended that you connect a standard telephone to the DVC-1000 VideoPhone. The telephone that you use for the DVC-1000 VideoPhone will not be connected to your phon
Summary of the content on the page No. 14
Using the DVC-1000 Layout of the i2eye Main Screen Status Icons Main Main Window Settings Buttons Privacy Status Status Icons Message Area Self-View Banner Window Window After you have correctly setup the i2eye VideoPhone using the Setup Wizard you will see the above Main Screen each time you turn on the VideoPhone. There is a larger Main Window that displays the self-view until a call is connected and then displays the party you are calling. The smaller Self-View Window then displays the self-v
Summary of the content on the page No. 15
Using the DVC-1000 (continued) Privacy Status Icons Privacy Status Icons appear on the Main Screen. Please see the previous page for an illustration. If you select Audio Privacy in Privacy Settings Audio window, the other party will not hear you and the audio icon will appear with a slash through it. If you select Video Privacy in Privacy Settings Video window, the other party will not see you and the video icon will appear with a slash through it. If you select Do Not Disturb in Privacy Setting
Summary of the content on the page No. 16
Using the DVC-1000 (continued) Placing a Manual Dial VideoPhone Call with the Telephone Handset Pick up the telephone handset. The DVC-1000 VideoPhone senses the phone is off the hook and a prompt appears on the screen asking you to either enter a phone number or press # key to select the speed dial list. Enter the phone number in the DVC-1000 VideoPhone just as you would if you were using a regular phone. The DVC-1000 VideoPhone rings while you wait for your call to be answered by the party on
Summary of the content on the page No. 17
Using the DVC-1000 (continued) Speakerphone Mode The DVC-1000 has a Speakerphone Mode if the call needs to be shared with more than one person, or when it is desirable to talk without using the telephone handset. In Speakerphone Mode, the speaker on the television and the microphone in the DVC-1000 VideoPhone are used. When a call is answered using the remote control, or a call is placed using the remote control, the DVC-1000 VideoPhone is automatically in Speakerphone Mode. Speakerphone mode i
Summary of the content on the page No. 18
Using the DVC 1000 (continued) Entering Phone Numbers Phone numbers may be entered in the following formats (the dash is entered automatically): 1-949-555-1212: The 1 is required if you are calling outside your local area. 555-1212: Will work only within the local area code. The local area code is specified in the Settings > Personal Info screen. Entering IP Addresses Valid entry for the IP address field would include: 205.104.32.20 (Dials a VideoPhone, or other H.323 videoconferencing device,
Summary of the content on the page No. 19
Using the Configuration Menu Main Screen After starting the DVC-1000 VideoPhone, the Main Screen is displayed. The self-view image should be displaying in the larger window. The following buttons reside on the main screen: Set up a speed dial list and choose from several methods of Dial - placing a call to other VideoPhones. You may choose to manually make a call with either another i2eye VideoPhone number, enter an IP Address, or select an entry on the speed dial list. View - Allows you to spe
Summary of the content on the page No. 20
Using the Configuration Menu (continued) Main Screen > Dial Mom and Dad D-Link Grandma Mary The Dial screen contains the speed dial list as well as buttons to manage the Speed Dial List and make manual VideoPhone calls Speed Dial List - This list contains up to 10 Speed Dial entries. Click the Add button to add to this list. A name is dialed by highlighting the item and pressing the ENTER button on the remote. Manual Dial - Allows the manual dialing of another user by telephone number or IP Add
