Summary of the content on the page No. 1
8 BOTTLE COUNTERTOP WINE COOLER
INSTRUCTION MANUAL
Model No.: MCWC8DCT2
To ensure proper use of this appliance and your safety, please read the
following instructions completely before operating this appliance.
Summary of the content on the page No. 2
TABLE OF CONTENTS NAMES OF THE PARTS……………………………………………………… 2 SPECIFICATIONS…………………………………………………………….. 3 IMPORTANT SAFETY INSTRUCTIONS……………………………………. 4 INSTALLATION INSTRUCTIONS BEFORE USING YOUR WINE COOLER……………………..…… 4 INSTALLING YOUR WINE COOLER ……………………………… 4 ELECTRICAL CONNECTION………………………………………… 5 OPERATING YOUR WINE COOLER TEMPERATURE CONTROL………………………………………….. 6 CARE AND MAINTENANCE CLEANING YOUR WINE COOLER………………………………… 7 VACATION TIME…………………………
Summary of the content on the page No. 3
NAMES OF THE PARTS MODEL NO. MCWC8DCT2 1. Temp. - 2. Temp. + 3. LCD DISPLAY 4. “°C/°F” SWITCH 5. INTERIOR LIGHT BUTTON 6. FAN MASK 7. SHELF 8. HANDLE 9. FOOT 2
Summary of the content on the page No. 4
SPECIFICATIONS – Model # MCWC8DCT2 Product Description Magic Chef 8 Bottle Countertop Wine cooler Model No. MCWC8DCT2 Unit Dimensions Width Height Depth ( inches ) 16.5” 11.2” 20.7” Net Weight ( lbs) 22lbs 3
Summary of the content on the page No. 5
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, WARNING or injury when using your wine cooler, follow these basic precautions: • Read all instructions before using the wine cooler. • Never clean wine cooler parts with flammable fluids. The fumes can create a fire hazard or explosion. • Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other wine cooler. The fumes can create a fire hazard or an e
Summary of the content on the page No. 6
Electrical Connection WARNING Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center. This wine cooler should be properly grounded for your safety. The power cord of this wine cooler is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not, under any circumstances, cut or remove the thir
Summary of the content on the page No. 7
OPERATING YOUR WINE COOLER Temperature Control • The LCD display will show the actual temperature of the inside cabinet. • The interior temperature can be set to between 8°C (46°F) and 18°C (64°F) on the control panel. • Press the up button to increase the temperature of inside the wine cooler. Press the down button to decrease the temperature of inside the wine cooler. • Keep pressing the up/down buttons until the desired temperature is displayed. The LCD display will flash and show
Summary of the content on the page No. 8
CARE AND MAINTENANCE Cleaning Your Wine cooler • Upon installation of your new appliance, it is recommended that it be cleaned thoroughly. • Turn off the wine cooler first and then unplug the unit from the wall outlet. • Remove all contents. • Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. • Be sure to keep the door gasket (seal) clean to keep the unit running eff
Summary of the content on the page No. 9
TROUBLESHOOTING GUIDE You can solve many common wine cooler problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service. PROBLEM POSSIBLE CAUSE Wine cooler does not operate. Not plugged in. The circuit breaker tripped or a blown fuse. Temperature inside the wine cooler is too warm. Temperature control is set too warm. Turn the control to a cooler setting and allow several hours for th
Summary of the content on the page No. 10
Wine cooler Warranty MC Appliance Corporation warrants each new Wine cooler to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase. A copy of the dated sales receipt / invoice is required to receive warranty service or a refu
