Summary of the content on the page No. 1
Wine Cooler
Model No. MCWC16M MCWC30M
Wine Cooler
. Before Putting Into Use . . . . . . . . . . . . . . . . .
2
. Important . . . . . . . . . . . . . . . . . . . . . . . .
3
. Placing and Installation . . . . . . . . . . . . . . . . .
4
. Description of the Appliance . . . . . . . . . . . . . . .
5
. Operation Control . . . . . . . . . . . . . . . . . . . .
5
6
. Maintenance and Clea
Summary of the content on the page No. 2
Wine Cooler Thank you for buying this appliance. We hope it will successfully serve your requirements for many years. This appliance is intended for storing bottled wine in the temperature o o range of 5.5 to 19.0 / 41.9 F to 66.2 F SAVE THESE INSTRUCTIONS Before Putting Into Use . . . . . . . . . . . . . 2 Instructions for Use Tips for Energy Savings Important . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
Before Putting Into Use Before connecting the appliance to electrical · If the gasket is damaged or the door seal is · power supply, leave it to stand for about 2 hours, poor, energy consumption is substantially which will reduce the possibility of malfunctions higher. To restore efficiency, replace in the cooling system due to transport handling. the gasket. · Clean the appliance thoroughly, especially in the · Always consider instructions stated in interior (See Cleaning and Maintenanc
Summary of the content on the page No. 4
Important If you have bought this appliance to replace · Disposing of Worn Out an old one equipped with a door lock that Appliances cannot be opened from the inside (lock, bolt), make sure that the lock is removed, disabled or destroyed before discarding. This will make · DANGER OR WARNING: Risk of child entrapment. it impossible for children to accidentally lock Before you throw away your old refrigerator or themselves inside the appliance and suffocate. freezer: The appliance must b
Summary of the content on the page No. 5
Placing and Installation CHOOSING THE RIGHT PLACE WARNING Place the appliance in a dry and regularly Instructions to avoid to the risk of fire , ventilated room. Never place the appliance near electric shock , or injury to persons. heat emitting devices (e.g. cooking appliances, radiators, water heaters or similar devices) and WIRING INSTRUCTIONS do not expose to direct sunlight. The appliance should be positioned at least 2in. For your personal safety, this appliance must away from electric or
Summary of the content on the page No. 6
Description of the appliance (A) Adjustable Wire Shelves (The number of shelves depends on the model) Shelves can be optionally placed on the guides inside the appliance. Perishable items should be stored towards the back/rear of the shelves. i.e. the coldest part of the shelf. (B) Defrost Water Outlet The interior of the appliance is cooled with a cooling plate mounted in the rear wall. Under the plate there is a channel and an outlet for defrost water. Regularly check the defrost water out
Summary of the content on the page No. 7
CONTROL KNOB Fig A (MCWC16M) Fig B (MCWC30M) Changes in ambient room temperature will affect the internal temperatures (choose correct . setting of the thermostat knob). . In STOP (0) position the appliance does not operate (cooling system is switched off ), yet power supply is not interrupted. . Temperature in the appliance also depends on how often the door is opened. ILLUSTRATION OF THE APPLIANCE THERMOSTAT DIAL: 1. For controlling the temperature inside the
Summary of the content on the page No. 8
Maintenance and Cleaning Automatic Defrosting of the Switch Off the Appliance Appliance When Not In Use There is no need to defrost the chiller , because If you do not intend to use the appliance for long ice depositing on the inner back wall is defrosted periods of time. Set the thermostat knob to the automatically. STOP (0) position, disconnect the power supply, Ice build-up on the inner back wall during the take out the contents and defrost and clean the compressor operation will defros
Summary of the content on the page No. 9
Trouble-Shooting Guide . Sometimes you may come across minor problems Ice Formation on the Inner that in most cases do not require a service call Rear Wall and can be easily eliminated. The problem may have resulted from improper handing and / or As long as the defrost water runs to the channel and through the outlet to the drain installation of the appliance. Please refer to the pan on the compressor, automatic defrosting below trouble-shooting guide to assist you in identifying t
Summary of the content on the page No. 10
Check the accessories on the interior of the Water is Leaking From the appliance, they should be placed correctly in Appliance their positions; also check, bottles, tins, and If the discharge water outlet is clogged, or the other vessels are not touching each other defrost water drips over the channel, water will causing rattling and/or vibrations. leak from the appliance. Clean the clogged outlet. . Manually defrost the increased ice layer ( see . ice Formation on the Inner rear Wall ).
