Perlick Z2151 user manual

Summary of the content on the page No. 1

Troubleshooting
OPERATING INSTRUCTIONS
SMART COUPLER with Empty Keg Sensor
Problem: Beer flow is slower with Smart Coupler
than with standard Perlick coupler.
Part No.
Probable Cause: Beer Flow Control Handle is in CLEAN position.
Solution: Slowly turn Beer Flow Control Handle to ON position.
27500F
Problem: Beer does not flow after keg is tapped.
The Smart Coupler* combines a
standard Perlick single-valve keg
Probable Cause: Smart Coupler has locked up.
coupler with a specially-designed
Solu

Summary of the content on the page No. 2

TAPPING and CLEANING PROCEDURES REPLACEMENT PARTS Beer Flow Control Filling the Lines the First Time Handle Operating 1. Turn Beer Flow Control Handle OFF. Positions (See Fig. 1). 1 2. Tap fresh keg. 3. Turn Beer Flow Control Handle to CLEAN. (See Fig. 3). 4. Open the beer faucet. When solid beer appears, close the faucet. The line is full. 7 5. Turn Beer Flow Control Handle ON. (See 8 2 Fig.2). The line is full and ready for service. When Tapping Fresh Kegs 1. Remove coupler from empty keg.