Motorola IC-T81A user manual

User manual for the device Motorola IC-T81A

Device: Motorola IC-T81A
Category: Marine Radio
Manufacturer: Motorola
Size: 2.46 MB
Added : 10/19/2013
Number of pages: 53
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Motorola IC-T81A. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Motorola IC-T81A.

For your convenience

If looking through the Motorola IC-T81A user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Motorola IC-T81A on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Motorola IC-T81A to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Motorola IC-T81A User manual - Online PDF
Advertisement
« Page 1 of 53 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Motorola IC-T81A but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Motorola IC-T81A. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

SERVICE
MANUAL
MULTIBAND FM TRANSCEIVER

Summary of the content on the page No. 2

INTRODUCTION This service manual describes the latest service information for the at the time of publication. IC-T81A/E MODEL VERSION SYMBOL U.S.A. USA-1 IC-T81A Australia AUS S.E.Asia SEA Europe EUR IC-T81E U.K. UK Italy ITA To upgrade quality, all electrical or mechanical parts and internal circuits are subject to change without notice or obligation. DANGER NEVER connect the transceiver to an AC outlet or to a DC power supply that uses more than 16 V. Such a connection could cause a fire haza

Summary of the content on the page No. 3

TABLE OF CONTENTS SECTION 1 SPECIFICATIONS SECTION 2 INSIDE VIEWS SECTION 3 DISASSEMBLY INSTRUCTIONS SECTION 4 CIRCUIT DESCRIPTION 4-1 RECEIVER CIRCUITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1 4-2 TRANSMITTER CIRCUITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3 4-3 PLL CIRCUITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of the content on the page No. 4

SECTION 1 SPECIFICATIONS M GENERAL • Frequency range : Version 50 MHz 145 MHz 440 MHz 1200 MHz 91.5 MHz (RX only) 3 TX: 144 – 148 TX: 430 – 450* 4 U.S.A. 1240 – 1300 76 – 107.995* 50 – 53.995 1 3 RX: 118 – 173.995* RX: 400 – 469.995* 4 Australia 50 – 53.995 144 – 148 430 – 440 1240 – 1300 88 – 107.995* 1 TX: 136 – 173.995* 2 4 S.E.Asia 400 – 469.995* 1240 – 1300 76 – 107.995* 50 – 53.995 1 RX: 118 – 173.995* 4 Europe, U.K. 50 – 52 144 – 146 430 – 440 1240 – 1300 88 – 107.995* 1 TX: 136 – 173.995

Summary of the content on the page No. 5

M RECEIVER • Receiver system : Double-conversion superheterodyne • Intermediate frequency : 1st 69.45 MHz (13.35 MHz: WFM) 2nd 450 kHz • Sensitivity* : (except spurious points; typical values) Band FM AM WFM 50 MHz 0.18 µV 0.56 µV – 144 MHz – – 0.18 µV 440 MHz 0.18 µV – – 1200 MHz – – 0.25 µV 91.5 MHz – 2.0 µV – * FM and WFM are measured at 12 dB SINAD, AM is measured at 10 dB S/N. • Squelch sensitivity : 50, 144, 440 MHz Less than 0.18 µV (Threshold) 1200 MHz Less than 0.25 µV (Threshold) AM (

Summary of the content on the page No. 6

SECTION 2 INSIDE VIEWS LOGIC UNIT • BOTTOM VIEW Crystal filter (X1: CR-639 5.039MH) CPU (IC1: M38267M8LGP) AF mute switch (Q361: 2SJ364) AF volume (IC202: M5222FP) AF power amplifier IF IC (IC201: TA7368F) (IC701: TA31136FN) RF UNIT • BOTTOM VIEW TOP VIEW Power amplifier (Q922: 2SK3075) Drive amplifier (Q921: MRF9745) APC sensor drive amplifier Q911: UN9215 ( ) Q913: XP6401 APC control WFM RF circuit amplifier circuit 1st mixer (IC601: μPC2757T) PLL IC (IC801: μPD3140G) VCO circuit 2 - 2

Summary of the content on the page No. 7

SECTION 3 DISASSEMBLY INSTRUCTIONS REMOVING THE CHASSIS PANEL • REMOVING THE SHIELD PLATE • 1 Remove 1 knob A, and unscrew 1 nut B. 1 Unsolder 10 points, F, to separate the shield plate and 2 Unscrew 2 screws C. LOGIC unit. 3 Remove the chassis panel in the direction of the arrow. F Shield plate B Chassis panel C A F F LOGIC unit REMOVING THE LOGIC UNIT REMOVING THE RF UNIT • • 1 Remove the sealing rubber. 1 Unsolder 1 point, G, to separate [ANT] plug. 2 Unsolder 1 point, D, to separate a SENSOR

Summary of the content on the page No. 8

SECTION 4 CIRCUIT DESCRIPTION Thus, transmit signals are blocked from entering the receiv- 4-1 RECEIVER CIRCUITS er circuits. The antenna switching circuit employs a 1/4l 4-1-1 DUPLEXER CIRCUIT (RF UNIT) type diode switching system. The passed signals are then The transceiver has a duplexer (low-pass and high-pass fil- applied to each RF amplifier circuit. ters) on the frist stage from the antenna connector to sepa- rate the signals into below UHF and SHF signals. The high- pass filter (L51–L55,

Summary of the content on the page No. 9

• RF signals WFM band • 50, 144, 440 and 1200 MHz band The WFM band signals are applied to the RF amplifier The applied RF signals are mixed with 1st LO signals at the (Q201) via the tunable band-pass filter (D202). The ampli- 1st mixer (IC601) to produce a 69.45 MHz 1st IF signal. The fied signals pass through the tunable bandpass filter (D203), 1st IF signal is output from the 1st mixer (IC601, pin 6), and and are then applied to the 1st mixer circuit (IC601, pin 1). then passed through the cr

Summary of the content on the page No. 10

4-1-8 2ND IF AND DEMODULATOR CIRCUITS Even when the squelch is closed, the AF mute switch (Q361) opens at the moment of emitting beep tones. (RF AND LOGIC UNITS) The 2nd mixer circuit converts the 1st IF signal to the 2nd IF • TONE SQUELCH signal. A double conversion superheterodyne system (which The tone squelch circuit detects AF signals and opens the converts receive signals twice) improves the image rejection squelch only when receiving a signal containing a matching ratio and obtain stable

Summary of the content on the page No. 11

The amplified signal is passed through the antenna switch- (3) 440 MHz band ing circuit (D101 and D102), low-pass filters and high-pass The signals from the limiter amplifier (RF unit; IC301) filters. The signal is applied to the antenna connector. changes the reactance of a diode (VCO unit; D321) to mod- ulate the oscillated signal at the 440-VCO circuit (VCO unit; (3) 440 MHz PA Q321, Q322, D321, D322, L322). The modulated signals are amplified at the buffer-amplifier (Q323) and the LO amplifi

Summary of the content on the page No. 12

The APC sensor (R911) detects driving current from the The applied signal is divided by serial data from the CPU (N- drive voltage at the YGR (Q138), drive (Q921) and power data) and phase-detected with the divided reference fre- (Q922) amplifiers. The detected current is converted into DC quency (5 kHz) at the phase detector section in the PLL IC. voltage at Q913, then applied to the APC control circuit The phase-detected signal is output from IC801 (pin 13) and (IC901, pin 2). The applied volt

Summary of the content on the page No. 13

4-5 PORT ALLOCATIONS 4-5-2 I/O EXPANDER IC (RF UNIT; IC3) 4-5-1 I/O EXPANDER IC (RF UNIT; IC2) Pin Port Pin Port Description Description number name number name Outputs VHVCO3 regulator control Outputs 300 MHz band RX regulator 4 Q1 4 Q1 signal. control signal. Outputs VLVCO3 regulator control Outputs AM mode regulator control 5 Q2 6 Q3 signal. signal. Outputs 6MVCO3 regulator control Outputs WFM band RX switching con- 6 Q3 7 Q4 signal. trol signal. Outputs VCO shift signal for SHF, Outputs WFM

Summary of the content on the page No. 14

4-5-3 CPU (LOGIC UNIT; IC1) Pin Port Pin Port Description Description number name number name Input port for the over-voltage detec- 20 CLONEIN Input port for the cloning signal. 1 VIN tion from connected battery pack or Outputs T4 regulator control signal. external power supply. 21 TXC High : While transmitting. Input port for remote control signals Outputs R3 regulator control signal. 2 REMOTE from an optional HM-75A microphone 22 R3C High : While receiving. via the [MIC] jack. Input port for

Summary of the content on the page No. 15

SECTION 5 ADJUSTMENT PROCEDURES 5-1 PREPARATION Ô Ô REQUIRED TEST EQUIPMENT EQUIPMENT GRADE AND RANGE EQUIPMENT GRADE AND RANGE Output voltage : 13.5 V DC DC voltmeter Input impedance : 50 kΩ/V DC or better DC power supply Current capacity : 3 A or more Frequency range : 300–3000 Hz Audio generator Measuring range : 1–10 W Measuring range : 1–500 mV RF power meter Frequency range : 28–1500 MHz Frequency range : 28–1300 MHz (terminated type) Impedance : 50 Ω Standard signal Output level : 0.1 µV

Summary of the content on the page No. 16

5-2 PLL ADJUSTMENT The following adjustment must be performed at “ADJUSTMENT MODE”. ADJUSTMENT MEASUREMENT POINT ADJUSTMENT ADJUSTMENT CONDITION VALUE UNIT LOCATION UNIT ADJUST PLL LOCK 1 • Displayed frequency : RF Connect the DC 0.8 V – 1.8 V Verify VOLTAGE 51.000 MHz voltmeter or an • Receiving oscilloscope to VLV. 2 • Transmitting Connect the DC 1.8 V – 2.8 V voltmeter or an oscilloscope to 6MLV. 3 • Displayed frequency : Connect the DC 1.4 V – 2.4 V 88.000 MHz voltmeter or an • Receiving osc

Summary of the content on the page No. 17

• RF UNIT BOTTOM VIEW 12LV PLL lock voltage check point (for 1200 MHz) ULV PLL lock voltage check point (for 440 MHz) VLV PLL lock voltage check point (for 50 MHz RX, WFM and 144 MHz) • RF UNIT TOP VIEW 6MLV PLL lock voltage check point (for 50 MHz TX) • LOGIC UNIT TOP VIEW L702 Detector Output voltage adjustment Q Detector Output voltage check point 5 - 3

Summary of the content on the page No. 18

5-3 RECEIVER ADJUSTMENT The following adjustment must be performed at “ADJUSTMENT MODE”. ADJUSTMENT MEASUREMENT POINT ADJUSTMENT ADJUSTMENT CONDITION VALUE UNIT LOCATION UNIT ADJUST 50 MHz 1 • Displayed frequency : LOGIC Connect a multime- Maximum voltage Top [DIAL] SENSITIVITY 50.000 MHz ter to check point panel • Connect an SSG to the antenna SD. connector and a SINAD meter with an 8 Ω load to the [SP] jack. • Set an SSG as : Level : 1 µV* (–107 dBm) Deviation : ± 3.5 kHz Modulation : 1 kHz •

Summary of the content on the page No. 19

• LOGIC UNIT TOP VIEW SD 50 MHz, WFM BAND, AIR BAND and 145 MHz Sensitivity check point 5 - 5

Summary of the content on the page No. 20

RECEIVER ADJUSTMENT (Continued) The following adjustment must be performed on the normal mode after “SENSITIVITY ADJUSTMENT” in SECTION 5-3. MEASUREMENT ADJUSTMENT ADJUSTMENT ADJUSTMENT CONDITION VALUE UNIT LOCATION S-METER 1 • Displayed frequency : Top Push and hold 51.000 MHz [EUR], [UK], [ITA] panel the [SQL] key (50 MHz band) 52.000 MHz [AUS], [SEA], [USA-1] • Connect the SSG to the antenna connector and set as: Level : 1 µV* (– 107 dBm) Modulation : 1 kHz Deviation : ± 3.5 kHz • Connect a t


Alternative user manuals
# User manual Category Download
1 Motorola EM1000 User manual Marine Radio 431
2 Motorola FD-1 User manual Marine Radio 2
3 Motorola IC-T81E User manual Marine Radio 4
4 Motorola HF-SSB User manual Marine Radio 11
5 Motorola CDM1250 User manual Marine Radio 18
6 Motorola LD-W-1 User manual Marine Radio 2
7 Motorola W510 User manual Marine Radio 5
8 Acu-Rite #01088 User manual Marine Radio 0
9 Acu-Rite 02010CDI User manual Marine Radio 2
10 Acu-Rite 972 User manual Marine Radio 0
11 Acu-Rite #02036WB User manual Marine Radio 6
12 Acu-Rite 01502BPDI User manual Marine Radio 0
13 AcuRite Chaney Instrument Company250 User manual Marine Radio 0
14 Adam Equipment CBC SERIES User manual Marine Radio 0
15 ADI Systems AT-201 User manual Marine Radio 239