American Audio XLT2000 user manual

User manual for the device American Audio XLT2000

Device: American Audio XLT2000
Category: Stereo Amplifier
Manufacturer: American Audio
Size: 3.29 MB
Added : 6/4/2013
Number of pages: 20
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for American Audio XLT2000. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with American Audio XLT2000.

For your convenience

If looking through the American Audio XLT2000 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual American Audio XLT2000 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual American Audio XLT2000 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
American Audio XLT2000 User manual - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual American Audio XLT2000 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to American Audio XLT2000. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Professional Power Amplifier
XLT Series
AMERICAN AUDIO®
6122 S. Eastern Ave.
Los Angeles Ca. 90040
1/12
User Instructions

Summary of the content on the page No. 2

This symbol is intended to alert the user to the presence of non insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: Risk of the electrical shock - DO NOT OPEN! CAUTION: To reduce the risk of electrical shock, do not remove cove

Summary of the content on the page No. 3

CAUTION Do not open - risk of electric shock P OUR AS SUR ER L A FI A BILE T E E T FOR OPTIMUM PERFORMANCE AND RELIABILITY DO NOT PRESENT THE AMPLIFIER OBTENIT UNE PERFORMANCE OPTIMALE, CAUTION: TO REDUCE THE RISK OF ELECTRIC WITH A SPEAKER LOAD OF LESS THAN 2 OHMS NESOUMETTE JAMAIS L’AMPLIFICATEUR SHOCK, DO NOT REMOVE THE COVER. OR ANY COMBINATION OF SPEAKERS THAT A UNE CHARGE D’IMPEDANCE TOTALE THERE ARE NO USER SERVICEABLE PARTS TOGETHER ARE LESS THAN 2 OHMS! INFERIEURE A 2 OHMS,

Summary of the content on the page No. 4

Important Precautions Introduction • To reduce the risk of electrical shock or fire, do not expose this Introduction: Congratulations and thank you for purchasing this unit rain or moisture. American Audio® XLT Series amplifier. This amplifier is a represen- • Do not spill water or other liquids into or on to your unit. tation of American Audio’s continuing commitment to produce the • Do not attempt to operate this unit if the power cord has been best and highest quality products all a

Summary of the content on the page No. 5

Front Panel 1 2 XLT Series Figure 1 7 6 5 4 3 1. Indicator LEDs - 5. Parallel Indicator - This indicator will glow when the amp is set to Parallel Mode. Channel Protect Indicator - The red Protect LED will begin to glow when the channel goes into protect mode. When the channel goes into 6. Channel 1 Gain Control - This rotary knob is used to control the out- protect mode all output for that channel will turn off. This is to protect any put signal of channel one. Turning the knob in a clockwis

Summary of the content on the page No. 6

8 9 10 11 12 13 Rear Panel XLT900 14 Figure 2 17 16 15 8. Channels 1 & 2 Speakon Outputs - Optional speaker output connections. Fuse Holder - This housing stores a 12 amp protective fuse. Never defeat the Use pins 1+ and 1- of this 4-pole Speakon connector to connect to your speak- fuse, the fuse is designed to protect the electronics in the event of severe power er’s Speakon input jack. fluctuations. Always be sure to replace the fuse with an exact match as the one being replaced, unles

Summary of the content on the page No. 7

Rear Panel 16 17 18 19 20 21 XLT1200, 2000, & 2500 26 22 25 Figure 3 24 23 16. Channels 1 & 2 Speakon Outputs - Optional speaker output connections. 26. Fuse Holder - This housing stores a 15 amp protective fuse for the XLT1200 Use pins 1+ and 1- of this 4-pole Speakon connector to connect to your speak- and 20 amp protective fuse for the 2000 and 2500. Never defeat the fuse, the er’s Speakon input jack. fuse is designed to protect the electronics in the event of severe power fluctua- 17. Ch

Summary of the content on the page No. 8

Set Up INPUTS - The XLT Series amplifier allows you to use two types of input connector per a channel, a XLR jack for balanced connections and a 1/4” female jack that will accept balanced and unbalanced connectors. Use these connections to connect the output signal from a mixer, cross-over or EQ to your XLT Series amplifier. A balanced connection is recommended for cable runs longer that 20ft. When constructing your own XLR cables follow the pin configuration describe below for proper connect

Summary of the content on the page No. 9

Bare Wire Connections: (Figure 7) Figure 7 When connecting your speakers to the amplifier using bare wire; Unscrew the red and black caps on the binding post, be sure not to completely remove or unscrew the red and black caps. Strip back the wire insulation 1/2” (13mm). Insert the bare wire into the hole that was reveled by unscrewing the binding post cap. After inserting the wire into the binding post hole, screw the binding post cap down on the wire. To reduce the risk of shock or damage

Summary of the content on the page No. 10

SPEAKON ASSEMBLY: You will need a pair of Neutrik Speakon ® NL4FC Figure 8 connectors. You will also need high-quality two or four conductor speaker cable, a pair of needle-nosed pliers and a 1.5-mm Allen key to assemble the Speakon connectors to your speaker wire. To assemble the Neutrik Speakon NL4FC connector, complete the following steps: Brass Inserts 4-Conductor Speaker Cable 1. Strip back 3/4-inch of the cable casing. Strip off 1/4-inch from the end of each of the conductors down to

Summary of the content on the page No. 11

OPERATING MODES: Always configure your amplifier operating mode before beginning operation. If you want to change it dur- ing performance. You must decrease the gain controls to their lowest levels to protect the speakers from any popping noise. Stereo Operation - Page 15/Figure 14 details an example of a typical stereo set-up. Connect your inputs into channels one and two of the amplifier. Connect your speakers to the outputs on the rear of the amplifier. Be sure that your front gain controls

Summary of the content on the page No. 12

PROTECTION: Thermal Protection - If the amplifiers operating temperature runs over 105°C (221°F) the amplifier will go into thermal protection to prevent damage from over heating. The Protect Indicator LED located on the front of the amp will light up, and the output signal will be muted. The fans will start to run at max speed to allow the amp to return to a safe operating temperature. To prevent amplifier over heating, make sure your input signal is not clipping (Red LED indicator located a

Summary of the content on the page No. 13

8-Ohm Loads: The amplifier can operate at practically any power level without risk of overheating. However, if it is pushed hard enough to continually light the “CLIP” indicator, the amplifier’s average output power can reach 150 watts. 4-Ohm Loads: If the “CLIP” indicator flashes occasionally, the amplifier is approaching its maximum long-term power capacity. If it is lit about half the time, the amplifier channel will probably go into thermal protection within a few minutes. AMPLIFIER FEATUR

Summary of the content on the page No. 14

TYPICAL STEREO OUTPUT CONNECTIONS Use Speakon Connections Figure 14 SPEAKERS SPEAKERS 4 OHM MINIMUM 4 OHM MINIMUM TYPICAL MONO BRIDGE SET-UP Use Channel 1 Inputs Only (XLR or 1/4” Jacks) Figure 15 X Set the Operation Mode switch to Bridge Use the two positive binding post SPEAKERS termainals (red) for speaker output. 8 OHM MINIMUM ©American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 14

Summary of the content on the page No. 15

TYPICAL PARALLEL SET-UP Use Channel 1 Inputs Only (XLR or 1/4” Jacks) Figure 15 Set the Operation Mode switch to Parallel SPEAKERS SPEAKERS 4 OHM MINIMUM 4 OHM MINIMUM ©American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 15

Summary of the content on the page No. 16

The XLT Series carries a one year limited warranty. We recommend you fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a R.A. (return authorization) number. If the mixer is under warranty, you must provide a proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on our toll free number. Please contact American Audio® customer support at (800) 3

Summary of the content on the page No. 17

XLT Series SPECS Power supply: AC 100V, 50/60Hz (Japan) AC 110V, 60Hz (Colombia) AC 120V, 60Hz (U.S.A. and Canada) AC 127V, 60Hz (Mexico) AC 220V, 50Hz (Chile and Argentina) AC 220V, 60Hz (Philippines and Korea) AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore) AC 240V, 50Hz (Australia and U.K.) MODEL: XLT 900 (Class AB) XLT 1200 (Class AB)

Summary of the content on the page No. 18

XLT Series SPECS Power supply: AC 100V, 50/60Hz (Japan) AC 110V, 60Hz (Colombia) AC 120V, 60Hz (U.S.A. and Canada) AC 127V, 60Hz (Mexico) AC 220V, 50Hz (Chile and Argentina) AC 220V, 60Hz (Philippines and Korea) AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore) AC 240V, 50Hz (Australia and U.K.) MODEL: XLT 2000 (Class H) XLT 2500 (Class H)

Summary of the content on the page No. 19

Notes American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 19

Summary of the content on the page No. 20

©American Audio® World Headquarters: 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-3322 Fax: 323-725-6100 Web: www.AmericanAudio.us E-mail: info@americanaudio.us American DJ Europe Junostraat 2 6468 EW Kerkrade Netherlands service@americandj.eu / www.americandj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99


Alternative user manuals
# User manual Category Download
1 American Audio Q-D5 MKII User manual Stereo Amplifier 38
2 American Audio V1500 User manual Stereo Amplifier 153
3 American Audio pmn User manual Stereo Amplifier 1
4 American Audio M822FX User manual Stereo Amplifier 44
5 American Audio V4000 plus User manual Stereo Amplifier 420
6 American Audio V-01 Plus Series User manual Stereo Amplifier 178
7 American Audio Professional Preamp Mixer Q-2411 Pro User manual Stereo Amplifier 24
8 American Audio - American DJ Supply, Inc.Professional Power Amplifier User manual Stereo Amplifier 8
9 American Audio DCD-PRO1000 User manual Stereo Amplifier 3
10 American Audio Vplus Series User manual Stereo Amplifier 15
11 American Audio VLP300 User manual Stereo Amplifier 141
12 American Audio VLP Series User manual Stereo Amplifier 41
13 American Audio XLT1200 User manual Stereo Amplifier 16
14 American Audio XLT2500 User manual Stereo Amplifier 28
15 American Audio VLP600 User manual Stereo Amplifier 133
16 Sony SA-VE312 User manual Stereo Amplifier 9
17 Sony MONAURAL User manual Stereo Amplifier 1
18 Sony 4-151-113-11 (1) User manual Stereo Amplifier 0
19 Sony 645-139 User manual Stereo Amplifier 3
20 Sony XM-1252GTR User manual Stereo Amplifier 35