Our goal is to provide you with a quick access to the content of the user manual for GE EtherNAV D7600 Series. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with GE EtherNAV D7600 Series.
For your convenience
If looking through the GE EtherNAV D7600 Series user manual directly on this website is not convenient for you, there are two possible solutions:
Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual GE EtherNAV D7600 Series on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual GE EtherNAV D7600 Series to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual GE EtherNAV D7600 Series but the selected pages only. paper.
Summaries
Below you will find previews of the content of the user manuals presented on the following pages to GE EtherNAV D7600 Series. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Abstracts of contents
Summary of the content on the page No. 1
GE Security managed ethernet switches ™ EtherNAV D7600 Series Installation & Operation Instructions
Summary of the content on the page No. 2
Manageable 8/9-Port Switch PREFACE This manual describes how to install and use the D7600 series EtherNav” Manageable 8/9-Port 10/100/1000 Base-TX (100/1000 Base-FX) Ethernet Switch. This switch integrates full wire speed switching technology with SNMP/RMON web- based management functions. The D7600 series brings a simple answer to today’s complicated networking environments. To get the most out of this manual, you should have an understanding of Ethernet networking concepts. In this manual, yo
Manageable 8/9-Port Switch PRODUCT OVERVIEW Manageable 8/9-Port Switch 100FX Optical Ports Console Port Front View (D7600-MM-E-CC shown) Power Ports 10/100TX Electrical Ports 10/100/1000TX Port Fiber Loss Alarm PACKAGE CONTENTS When you unpack the product package, you shall find the items listed below. • D7600 EtherNav” Management Switch • D7600 Quick Start Guide • External Power Adapter • CD ROM PRODUCT FEATURES Basic Features: - Provides up to nine (10/100/1000TX and/or 100/1000FX combinati
Summary of the content on the page No. 6
Manageable 8/9-Port Switch PRODUCT FEATURES CONTINUED... Management Support: VLAN - 802.1Q tagged VLAN (up to 64 VLANs) - Quality of Service (QoS) Link Aggregation - Port-based Aggregation, up to four groups with a maximum of four ports each group - Load sharing based on source and destination MAC addresses Port-Mirroring - Port-mirroring provided through dedicated port, Port 1 Internet Working Protocols: Bridging - 802.1D Spanning Tree - 802.1P/Q –GARP/GVRP IP Multicast - IP Multicast Packet F
Summary of the content on the page No. 7
Manageable 8/9-Port Switch FRONT PANEL DISPLAY (D7600-MM-E-CC Shown) 10/100TX Port Status Optical Status 10/100/1000TX Port Status Power Indicator 1. Power Indicator This LED comes on when the switch is properly connected to power. 2. Optical Status LED’s (FX) The ACT LED’s come on when data is present. (LED will flash at the rate data is transferred). The LNK LED’s will be on for 100FX speed transmission. 3. 10/100/1000TX Port Status LED’s The LED’s are located at each port, displaying statu
Summary of the content on the page No. 8
Manageable 8/9-Port Switch LED State Indication GREEN Steady A valid network connection established Flashing Data transfer YELLOW PHYSICAL PORTS This EtherNav” managed switch provides up to nine (10/100/1000TX and/or 100/1000FX combinations) ports: CONNECTIVITY - RJ-45 connectors - SC connector on fiber ports MODE SELECTION - 10BaseT full-duplex mode - 10BaseT half-duplex mode - 100BaseTX full-duplex mode - 100BaseTX half-duplex mode - 100BaseFX full-duplex mode - 100BaseFX half-duplex mode - 10
Summary of the content on the page No. 9
Manageable 8/9-Port Switch PLEASE NOTE: I. Half-duplex mode uses back pressure flow control to prevent the receiving buffer from being overrun by data from a source node. II. Full-duplex mode uses 802.3x flow control standard to prevent fast data traffic from overrunning slow data traffic. III. Auto-sensing mode is in use after auto-negotiating with the other end of the link. BASIC FUNCTIONS In general, the D7600 is responsible for switching both VLAN tagged and untagged frames from a receivin
Summary of the content on the page No. 10
Manageable 8/9-Port Switch PLEASE NOTE: I. Half-duplex mode uses back pressure flow control to prevent the receiving buffer from being overrun by data from a source node. II. Full-duplex mode uses 802.3x flow control standard to prevent fast data traffic from overrunning slow data traffic. III. Auto-sensing mode is in use after auto-negotiating with the other end of the link. LEARNING After VLAN classification, the switch checks the pair in the switching database (SD
Summary of the content on the page No. 11
Manageable 8/9-Port Switch MULTICAST SWITCHING For multicast switching, the D7600 checks whether the received frame is a BPDU. If a BPDU is received, the switch forwards the frame to the CPU for processing by the spanning tree protocol. Otherwise, the D7600 performs the following processes: VLAN CLASSIFICATION Same as for unicast switching. LEARNING Same as for unicast switching. FILTERING After learning the address, the switch checks: - Whether the source port or destination port is not in the
Summary of the content on the page No. 12
Manageable 8/9-Port Switch VLAN A virtual LAN (VLAN) is a network of computers or peripherals that behave as if they are connected to the same wire, even though they may actually be physically located in different locations of a LAN. VLANs are similar to a group of end stations, perhaps on multiple physical LAN segments that are not inhibited by their physical location and can communicate as if they were on a common LAN. VLANs are configured through software rather than hardware, which makes th
Summary of the content on the page No. 13
Manageable 8/9-Port Switch BROADCAST CONTROL In traditional networks, traffic broadcasts to all network devices, whether they are the intended recipients or not. However, VLANs can be set up to contain only those devices that need to communicate with each other. As a result, VLANs considerably reduce network congestion. In addition, VLANs prevent broadcast storms from causing a network from crashing due to volumes of traffic. MULTICAST-BASED MULTIMEDIA APPLICATIONS Multimedia applications, suc
Summary of the content on the page No. 14
Manageable 8/9-Port Switch REMOTE VLAN MEMBERSHIP Additionally to providing network management tools that allow network administrators to stat- ically add and delete VLAN member ports, the switch also supports GVRP (GARP VLAN Registration Protocol). GVRP allows for dynamic registration of VLAN port members within switch and across multiple switches. Other than supporting dynamic updating of registration entries in a switch, GVRP is used to communicate VLAN registration information to other VLA
Summary of the content on the page No. 15
Manageable 8/9-Port Switch IGMP Snooping & IP Multicast Filtering Continued... If there is more than one router on the LAN performing IP multicasting, one of the routers is elected ‘querier’ and assumes the reponsibility. Based on the group membership information learned from the IGMP, a router can deter- mine which (if any) multicast traffic needs to be forwarded to each of its ‘leaf’ sub-networks. Multicast routers use this information, along with a multicast routing protocol, to support IP
Summary of the content on the page No. 16
Manageable 8/9-Port Switch INSTALLATION This section gives step-by-step instructions about how to install the EtherNav” D7600 switch: Selecting a Site for the Switch As with any electric device, you should place the switch where it will not be subjected to temperatures, humidity, or electromagnetic interference above the rated specifications. The site you select should meet the following requirements: • The ambient temperature should be between –40 to 74 degrees Celsius. • The relative humidity
Summary of the content on the page No. 17
Manageable 8/9-Port Switch DIN Rail Back Mounting (-DB Option) The bracket provided will require the removal and re-installation of some cover screws as shown below. Bracket (-DB Option) Cover Screws DIN Rail Side Mounting (-DS Option) The bracket provided will require the removal and re-installation of one cover screw, the other screws are provided with the bracket as shown below. D7600 Unit (10/100 Port Side) Provided Mounting Screws Bracket Note: Bracket is mounted on the Power (-DS Option)
Summary of the content on the page No. 18
Manageable 8/9-Port Switch Rack Mounting Single Unit (-RS Option) The brackets provided have screws included for proper mounting as shown below. Mounting Screws 4 Locations (Provided) Brackets (-RS Option) (Top View) (Front View) Note: All screws must be fastened and secured to insure adequate stability and strength. User’s Manual 14
Summary of the content on the page No. 19
Manageable 8/9-Port Switch Rack Mounting Dual Units (-RD Option) The brackets and braces provided have screws included for proper mounting as shown below. (Front View) Brackets (2 Provided) Brace (2 Provided ) Brace Mounting Screws Locations (Bottom View) User’s Manual 15
Summary of the content on the page No. 20
Manageable 8/9-Port Switch CONNECTING TO POWER External Power Step One: Wire the supplied AC power adapter to the “A” receptacle plug at the front of the switch. — white stripe to pin 1 (+), black to pin 2 (-). Step Two: Attach the plug into a standard AC outlet with the appropriate AC voltage. Primary “A” Power Connector Secondary “B” Power Connector To Primary Wall Supply To Secondary Supply (D7600-MM-E-CC Shown)) Note: The secondary supply must be equal to or less than the potential of the pr
