Summary of the content on the page No. 1
PLANET PoE IP Phone User’s Manual
H.323/SIP PoE IP Phone
VIP-103PT / VIP-153PT / VIP-153T
User’s Manual
1
Summary of the content on the page No. 2
PLANET PoE IP Phone User’s Manual Copyright Copyright (C) 2005 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any elec
Summary of the content on the page No. 3
PLANET PoE IP Phone User’s Manual Table of Contents Chapter 1 ...........................................................................................................................................4 Overview of the PoE IP Phone...........................................................................................................4 VIP/-103PT / VIP-153PT / VIP-153T Features.................................................. 4 1.1 Hardware Overview...................................
Summary of the content on the page No. 4
PLANET PoE IP Phone User’s Manual Chapter 1 Overview of the PoE IP Phone Meeting the next-generation Internet telephony service demands, PLANET Technology provides feature-rich, toll-quality Internet telephony service solutions. With 802.3af Power over Ethernet (PoE) LAN interface supported, the VIP-103PT is H.323 v2/v3/v4 compliant with H.235 security support, VIP-153PT is SIP 2.0 (RFC3261) compliant with SIP digest authentication supports. And the VIP-153 is the cost-effective SIP
Summary of the content on the page No. 5
PLANET PoE IP Phone User’s Manual Feature-rich keypad IP Phone The IP Phone integrates a high-quality speakerphone with the Call Hold, Forward and Transfer functions and also provides advanced telephone features, such as 10 speed-dial keys, last number redial, incoming call history indicator in a much more convenient and functional manner than traditional telephone sets. Dynamic IP address assignment, and voice communication The IP Phone can act as a PPPoE/DHCP client, automatically
Summary of the content on the page No. 6
PLANET PoE IP Phone User’s Manual Keypad Description The red light goes on-off when there is an incoming call. 1 Light 2 LCD Display Menu and all status shall be displayed for users. To scroll up the menu items or left delete a digit per each key “ UP” Key press while editing the settings. 3 “ DOWN” Key To scroll up the menu items or left delete a digit per each key press while editing the settings. When the IP phone is at idle state or talking on handset or 4 speaker, this ke
Summary of the content on the page No. 7
PLANET PoE IP Phone User’s Manual 1.1.2 Rear View 3. 2. 1. Rear Panel of VIP-103PT/VIP-153PT/VIP-153T RJ-45 connector, to maintain the existing network structure, 1 PC connected directly to the PC through straight CAT-5 cable RJ-45 connector, for Internet access, connected directly to Switch/Hub through straight CAT-5 cable. 2 WAN 802.3af PoE support in PT model 3 7V DC 7V DC Power input outlet The Power over Ethernet support on PLANET PoE IP pho
Summary of the content on the page No. 8
PLANET PoE IP Phone User’s Manual Chapter 2 Configuring the PoE IP Phone through LCD Phone menus 2.1 Initialize VIP103PT/VIP-153PT/VIP-153T STEP 1: Power on machine, the LCD screen displays flashing greeting as below: Starting … STEP 2: Wait for 10 seconds, the main LCD screen shall be shown as below, and when the Internet access is available, the VIP-103PT / VIP-153PT / VIP-153T will connect to the SNTP server. The current time will be displayed on the LCD. Hi
Summary of the content on the page No. 9
PLANET PoE IP Phone User’s Manual 2.2 LCD Menu Configuration LCD menu configuration for VIP-103PT 1st Level 2nd Level 3rd Level IP PBX mode 1.1 (On/Off) If Yes: Name Number 1.2 Hotline 1.2.1 (Yes/No) Auto 1.2.2 (Yes/No) Manual If Yes: IP Address IP Address Check the active network parameters in machine View 2.1 Network Value 2.1.1 IP Address 2.1.2 Network Mask 2.1.3 Default Route 2.1.4 DNS Server 2.2 IP PBX Mode 2.2 Ping 2.3 GK IP Address 2.4 Firm
Summary of the content on the page No. 10
PLANET PoE IP Phone User’s Manual LCD menu configuration for VIP-153PT/VIP-153T 1st Level 2nd Level 3rd Level View 1.1 Network Value 1.1.1 IP Address 1.1.2 Network Mask 1.1.3 Default Route 1.1.4 DNS Server 1.2 Ping 1.3 Restart 1.4 Firmware Version 1.5 (Yes/No) PKT Trace Password:123 Configure 2.1 Network 2.1.1 (Yes/No) Dynamic IP 2.1.2 (Yes/No) PPPoE If Yes: PPPoE User Name PPPoE Password 2.1.3 Fixed IP IP Address Network Mask Default Route
Summary of the content on the page No. 11
PLANET PoE IP Phone User’s Manual “View” menu In the “View” main menu, there are submenus, users may check these items for machine information and also provide some simple functions to check the network status of the IP Phone. 1.1 View current network settings By selecting “View” ”Network”, you could see the active network parameters in machine. 1.2 Ping By selecting “View” ”Ping” and key in the IP address or domain name of another device, the IP Phone can verify the connection bet
Summary of the content on the page No. 12
PLANET PoE IP Phone User’s Manual network configuration menu, and enable the DHCP client in Dynamic IP selection menu and the IP phone will obtain the IP parameters dynamically, and connect to Internet automatically. Configuration steps: Configure Password 123 Network (Yes/No) Dynamic IP 2.1.2 PPPoE Most of the broadband network environment provided now by ISP is the ADSL connection. In the ADSL environment, the IP Phone can directly connect to the ADSL modem by setting th
Summary of the content on the page No. 13
PLANET PoE IP Phone User’s Manual 2.2 Registration to H.323 gatekeeper / SIP Proxy Server After setting up the network parameters, the IP Phone is able to perform registration to the H.323 gatekeeper (VIP-103PT) or SIP Proxy server (VIP-153PT/VIP-153T) when you’ve been assigned the account from VoIP vendor/service provider. 2.2.1 Registration to a H.323 gatekeeper (VIP-103PT) When VIP-103PT is installed in an H.323 GK enabled network, the VIP-103PT registers to the gatekeeper for vo
Summary of the content on the page No. 14
PLANET PoE IP Phone User’s Manual 2.2.1 Registration to a SIP Proxy Server (VIP-153PT/VIP-153T) When the VoIP vendor/operator is running the SIP system, use the VIP-153PT/VIP-153T to register to the proxy server. Configure the following parameters to do the registration. Configure Password 123 SIP Username: The username used to register to Proxy server. If Proxy server doesn’t request specific username, please enter the assigned telephone number here. Telephone Number: Plea
Summary of the content on the page No. 15
PLANET PoE IP Phone User’s Manual Outbound Proxy (Yes/No): Please set this item to Yes if the registration needs to pass through the Outbound Proxy server. Registration / Startup message When the network and registration configurations are set, please restart the IP Phone, the LCD display on the IP phone will show one of the following message depends on whether the registration is ok or not. When the VIP-103PT is registering to a H.323 gatekeeper successfully, the LCD screen will
Summary of the content on the page No. 16
PLANET PoE IP Phone User’s Manual Means that the VIP-103PT/VIP-153PT/VIP-153T is working OK and ready for outgoing/incoming calls. But the “Proxy On” flag is “No”, i.e. the VIP-103PT/VIP-153PT/VIP-153T not needs to register. In this case, can call the IP address of other VIP-153PT/VIP-153T directly. When the PoE IP Phone is failed in registering to a H.323 gatekeeper or SIP proxy server, the LCD screen will display the following message: RegFail (Failed message)
Summary of the content on the page No. 17
PLANET PoE IP Phone User’s Manual so, if the DHCP server is responding, the DHCPFail() display will change to Hi() display to notify that the PoE IP phone is working OK. When the PoE IP Phone is set to use the PPPoE method for network connection, but have some problem in finding the PPPoE server (ADSL modem), the LCD screen will display the following message: PPPoE FindFail (Number) Date Time Means that the PoE IP phone is configured to us
Summary of the content on the page No. 18
PLANET PoE IP Phone User’s Manual this PoE IP Phone will not ring. 2.3 Call Forward Configurations The PoE IP Phone supports three different kinds of call forward functions, please select “Configure” ”Forward Mode” for these three kinds of selection: 2.3.1 Immediate Forward Under “Forward Mode” submenu, users are able to setup for immediate forward by selecting Yes on (Yes/No) Immediate and input the number he/she would like the call to be forwarded to. For example, when A calls B,
Summary of the content on the page No. 19
PLANET PoE IP Phone User’s Manual Chapter 3 Configuring the VIP-103PT/VIP-153PT/ VIP-153T through Web Pages VIP-103PT/VIP-153PT/VIP-153T are equipped with a web-based graphical user interface that can cover most configurations and machine status monitoring. Via standard, web browser, you can configure and check machine status from anywhere around the world. Step 1. Browse the IP Address of your IP phone After TCP/IP configurations on the phone, you may now open your web brow
Summary of the content on the page No. 20
PLANET PoE IP Phone User’s Manual • Firmware version: machine firmware version information • Network value: IP Address: 192168.0.1 Subnet Mask: 255.255.255.0 Default routing gateway: 192.168.0.254 DNS Server: 168.95.1.1 Step 4. Start machine configurations Most important items are Network Configuration and H.323/SIP Configuration. Please remember to configure these commands before start to work with VIP-103PT/VIP-153PT/VIP-153T. After parameter modifications, it is requ
