Summary of the content on the page No. 1
Model No. PFTL59610
Serial No.
USER'S MANUAL
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Serial
Number
Decal
QUESTIONS?
If you have questions, or if there
are missing or damaged parts,
we will guarantee complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate
Summary of the content on the page No. 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 O
Summary of the content on the page No. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure pation of 450 joules. The surge suppressor that all users of this treadmill are adequately must be electrically rated for 120 volts AC and informed of all warnings and precautions. 15 amps. To purchase a surge suppressor, see your local PROFORM dealer or c
Summary of the content on the page No. 4
21. When using iFIT.com CDs and videos, an 24. Inspect and tighten all parts of the treadmill electronic “chirping” sound will alert you regularly. when the speed and/or incline of the treadmill is about to change. Always listen for the 25. Never insert or drop any object into any “chirp” and be prepared for speed and/or in- opening. cline changes. In some instances, the speed and/or incline may change before the per- 26.DANGER: Always unplug the power sonal trainer describes the change. cord
Summary of the content on the page No. 5
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM at 1-800-999-3756, Monday through Friday, 6 a.m. 60 GTS treadmill. The 60 GTS treadmill combines ad- until 6 p.m. Mountain Time (excluding holidays). To vanced technology with innovative design to help you help us assist you, please note the product model get the most from your exercise program in the conve- number and serial number before calling. The model nience and privacy of your home. And when you’re not number of the tre
Summary of the content on the page No. 6
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw- driver and rubber mallet . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
Summary of the content on the page No. 7
3. With the help of a second person, carefully tip the 3 Uprights (82) back to the vertical position. Attach the Latch Assembly (9) to the left Upright (82) with the two 1/2” Screws (89). 9 89 82 89 4. Insert a Handrail Extension (85) into the post on the left 4 Upright (82). Align the holes in the Handrail Extension Post with the holes in the post. If necessary, tap the Handrail 76 Extension with a rubber mallet to fully insert it. Next, attach the Handrail Extension by tightening three Small S
Summary of the content on the page No. 8
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- Your treadmill features a walking belt coated with trated in drawing 1 below. A temporary adapter that TM PERFORMANT LUBE , a high-performance lubricant. looks like the adapter illustrated in drawing 2 may be IMPORTANT: Never apply silicone spray or other used to connect the surge suppressor to a 2-pole substances to the wal
Summary of the content on the page No. 9
CONSOLE DIAGRAM Manual/Program Indicators Display Program Display Display Program Indicators Note: If there is a thin sheet of plastic Clip on the face of the console, remove it. Key audio cable, you can connect the treadmill to your home stereo, portable stereo, or computer and play CAUTION: Before operating the special iFIT.com CD programs (CDs are available sep- console, read the following precautions. arately). IFIT.com CD programs automatically control the speed and incline of the treadmil
Summary of the content on the page No. 10
HOW TO TURN ON THE POWER to flash. To restart the walking belt, press the Start button or the Speed button. Plug in the power cord (see HOW TO PLUG IN 1 Change the incline of the treadmill as desired. THE POWER CORD on page 8). 4 To change the incline of Locate the on/off 2 the treadmill, press the switch on the treadmill On Incline buttons. Each time near the power cord. Position a button is pressed, the Move the on/off switch incline will change by to the on position. 0.5%. Note: After
Summary of the content on the page No. 11
Distance/Laps reading. If the displayed heart rate appears to be display—This display too high or too low, or if your heart rate is not dis- shows the distance that played, lift your thumbs off the sensors and allow you have walked and the the display to reset. Then, place your thumbs on number of 1/4-mile laps the sensors as described above. Remember to you have completed. The stand still while measuring your heart rate. display will change from one number to the other every few seconds, as sh
Summary of the content on the page No. 12
The program display Note: Each time a segment ends and the speed will show the first speed settings move one column to the left, if all of the settings for the pro- indicators in the Current Segment column are lit, gram. The Time/ the speed settings will move downward so that only Incline/Segment Time the highest indicators in the columns will appear in display will show how the program display. When the speed settings long the program will move to the left again and not all of the indicators l
Summary of the content on the page No. 13
HOW TO CONNECT YOUR PORTABLE STEREO HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3.5mm LINE OUT jack, see instruction B. If your To use iFIT.com CDs, the treadmill must be connected stereo has only a PHONES jack, see instruction C. to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 13 and A. Plug one end of the audio cable into the j
Summary of the content on the page No. 14
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, Note: If your computer has a 3.5mm LINE OUT jack, see instruction A below. If the LINE OUT jack is see instruction A. If your computer has only a being used, see instruction B. PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack on the A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the front of the tr
Summary of the content on the page No. 15
HOW TO CONNECT YOUR VCR HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV To use iFIT.com CDs or videocassettes, the treadmill with a built-in VCR, see instruction B. If your VCR must be connected to your portable CD player, portable is connected to your home stereo, see HOW TO stereo, home stereo, computer with CD player, or CONNECT YOUR HOME STEREO on page
Summary of the content on the page No. 16
If the speed or incline settings are too high or too • adjust the volume of your CD player or VCR. If low, you can manually override the settings at any the volume is too high or too low, the console time by pressing the Speed or Incline buttons on may not detect the program signals the console. However, when the next “chirp” is heard, the speed and/or incline will change to • make sure that the audio cable is properly the next settings of the CD or video program. connected, that it is fully plu
Summary of the content on the page No. 17
Return to the treadmill and stand on the foot HOW TO USE PROGRAMS DIRECTLY FROM 7 rails. Find the clip attached to the key and slide OUR WEB SITE the clip onto the waistband of your clothing. When the on-screen countdown ends, the program Our new Web site at www.iFIT.com allows you to will begin and the walking belt will begin to move. access basic programs, audio programs, and video Hold the handrails, step onto the walking belt, and programs directly from the internet. Additional o
Summary of the content on the page No. 18
THE INFORMATION MODE/DEMO MODE THE OPTIONAL CHEST PULSE SENSOR The console features an information mode that keeps An optional chest pulse sensor adds even more fea- track of the total number of hours that the treadmill has tures to the console. The chest pulse sensor offers been operated and the total number of miles that the hands-free operation and continuously monitors your walking belt has moved. The information mode also heart rate during your workouts. To purchase the allows you to switch
Summary of the content on the page No. 19
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of injury, bend your legs and keep you
Summary of the content on the page No. 20
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand 1 as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin. Slowly release the latch knob. Latch Open Knob Pin Catch 2. Hold the treadmill firmly with both hands, and lower the 2 treadmill to the floor. Do not drop the treadmill frame to the floor. CAUTION: To decrease the possibility of injury, bend your legs and keep your ba
