Bosch Appliances GLL2-50 user manual

User manual for the device Bosch Appliances GLL2-50

Device: Bosch Appliances GLL2-50
Category: Laser Level
Manufacturer: Bosch Appliances
Size: 2.55 MB
Added : 9/21/2013
Number of pages: 32
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Bosch Appliances GLL2-50. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Bosch Appliances GLL2-50.

For your convenience

If looking through the Bosch Appliances GLL2-50 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Bosch Appliances GLL2-50 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Bosch Appliances GLL2-50 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Bosch Appliances GLL2-50 User manual - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Bosch Appliances GLL2-50 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Bosch Appliances GLL2-50. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
GLL2-50
Call Toll Free for
Pour obtenir des informations Llame gratis para
Consumer Information
et les adresses de nos centres obtener información
& Service Locations
de service après-vente, para el consumidor y
appelez ce numéro gratuit ubicaciones de servicio
1-877-BOSCH99 (1-877-267-2499) www.b

Summary of the content on the page No. 2

OPEN OPEN OPEN 5 4 3 2 6 7 1 1 8 13 2 605 438 682 9 10 12 1 618 C01 066 11 Complies with 21 CFR 1040.10 and 1040.11 except for dev at ons pursuant to Laser Notice 50, 7/26/2001 i i GLL2-50 3 601 K63 110 Battery 3 x 1.5V LR6 (AA) Bosch Tool Corp., Mt. Prospect, IL Made in China IEC 60825-1:2007-03 <1 mW, 635 nm Laser Radiation. Do not stare into the beam. Class 2 Laser product. Radiación láser. No mire al rayo. Producto láser de Clase 2. Rayonnement laser. Ne regardez pas directement dans le

Summary of the content on the page No. 3

A B C D OR E F -3-

Summary of the content on the page No. 4

14 14 18 G H 2 607 990 031 0 601 015 B10 15 16 0 601 069 110 17 0 601 015 A10 I J K L ! WARNING Make sure that this device and the tool are securely mounted before operation. ! AVERTISSEMENT Assurez-vous que cet appareil et l’outil sont solidement assujettis avant de les utiliser. Asegúrese de que este dispositivo y la herramienta estén montados de manera segura ! ADVERTENCIA antes de su utilización. -4- 6cm

Summary of the content on the page No. 5

|2 M N O P Q 1/4" 5/8" -5-

Summary of the content on the page No. 6

General Safety Rules Read all instructions. Failure to follow all instructions listed below may ! WARNING result in hazardous radiation exposure, electric shock, fire and/or serious injury. The term “tool” in all of the warnings listed below refers to your mains-operated (corded) tool or battery-operated (cordless) tool. The following labels are on your laser tool for your convenience and ! WARNING safety. They indicate where the laser light is emitted by the tool. ALWAYS BE AWARE of their loca

Summary of the content on the page No. 7

Work area safety Use and care Keep work area clean and well lit. Use the correct tool for your application. Cluttered or dark areas invite accidents. The correct tool will do the job better and safer. DO NOT operate the laser tool around children or allow children to operate the Do not use the tool if the switch does not laser tool. Serious eye injury could result. turn it on and off. Any tool that cannot be controlled with the switch is dangerous and Electrical safety must be repaired. Batterie

Summary of the content on the page No. 8

Intended Use The tool is intended for determining and checking horizontal and vertical lines. Preparation Inserting/Replacing the Battery When the battery indication 5 flashes red, the batteries must be replaced. Use only alkaline batteries. Always replace all batteries at the same time. To open the battery lid 8, press the latch of Only use batteries from one brand and with the battery lid 11 in the direction of the arrow the identical capacity. and remove the battery lid. Insert the � Remove

Summary of the content on the page No. 9

Operation Initial Operation operating mode button 4 pushed). Operating Modes (see figures A–D) • Protect the tool against moisture and direct sun irradiation. The tool has three operating modes between which you can switch at any time: • Do not subject the tool to extreme temperatures or variations in – Horizontal operation “–”: Produces a temperature. horizontal laser line, As an example, do not leave it in vehicles – Vertical operation “l”: Produces a vertical for longer periods. In case

Summary of the content on the page No. 10

If the automatic levelling function is not Lock Mode - Working without Automatic possible, e.g. because the surface on which Levelling (see figure D) the tool stands deviates by more than 4° For work without automatic levelling, push from the horizontal plane, the laser beams the On/Off switch 7 to the “ on” position. flash. In this case, bring the tool to the level When the automatic levelling is switched off, position and wait for the self-levelling to the laser line flash continuously.

Summary of the content on the page No. 11

d 2 26ft 26ft 26 ft – Without turning the tool, position it close to wall B. Switch the tool on and allow it to level in. A – Align the height of the tool (using a tripod or by underlaying, if required) in such a manner that the cross point of the laser lines is projected against the previously marked point II on the wall B. A B B 180˚ – At a distance of 13 ft from the measuring d tool, mark the centre of the laser line (point I on wall A and point II on wall B) on both walls. A – Withou

Summary of the content on the page No. 12

7 ft d Checking the Leveling Accuracy of the Vertical Line For this check, a door opening is required with at least 13 ft of space (on a firm surface) to each side of the door. – Position the tool on a firm, level surface (not on a tripod) 13 ft away from the door opening. Allow the tool to level in while in cross-line operation mode, and direct the laser beams at the door opening. – Position the tool on the other side of the door opening directly behind point II. Allow the tool to level in

Summary of the content on the page No. 13

Working with the Measuring Plate Working with the Laser Receiver (Accessory) (Optional Accessory) (see figures E & H) With the measuring plate 15, it is possible to Under unfavorable light conditions (bright project the laser mark onto the floor or the environment, direct sunlight) and for larger laser height onto a wall. distances, use the laser receiver for improved finding of the laser lines 16. When With the zero field and the scale, the offset or working with the laser receiver, switch the

Summary of the content on the page No. 14

L LIIM MIIT TE ED D W WA AR RR RA AN NT TY Y O OF F B BO OS SC CH H L LA AS SE ER R A AN ND D M ME EA AS SU UR RIIN NG G T TO OO OL L P PR RO OD DU UC CT TS S Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all BOSCH laser and measuring tool products will be free from defects in material or workmanship for a period of three (3) years from date of purchase. SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the

Summary of the content on the page No. 15

Consignes générales de sécurité Lisez toutes les instructions. Le non-respect de toutes les instructions figurant ci- ! AVERTISSEMENT dessous risquerait de causer une exposition dangereuse aux rayonnements, un choc électrique, un incendie et/ou des blessures graves. L'expression « instrument de topologies » dans tous les avertissements figurant plus bas fait référence à votre instrument de mesure, de détection et de tracé de topologies branché sur le secteur (avec cordon) ou à votre instrument d

Summary of the content on the page No. 16

Sécurité sur le lieu de travail magnétique (Fig. P) peut entraîner des pertes de données irréversibles. Maintenez votre lieu de travail propre et bien éclairé. Les lieux de travail encombrés ou sombres invitent Utilisation et entretien les accidents. Utilisez l'outil correct pour votre application. N'UTILISEZ PAS l'instrument laser à proximité L'instrument de mesure, de détection et de tracé de d'enfants, et ne laissez pas des enfants se servir de topologies correct vous permettra de faire un m

Summary of the content on the page No. 17

Emploi prévu Cet outil a été conçu pour déterminer et vérifier les lignes horizontales et verticales. Préparation Inserting/Replacing the Battery Si l’indicateur de charge des piles 5 clignote rouge, il faut remplacer les piles. Mise en place/changement des piles Toujours remplacer toutes les piles en même temps. N’utiliser que des piles alcalines au manganèse. Pour N’utiliser que des piles de la même marque avec la ouvrir le couvercle du compartiment à piles 8, appuyer même capacité. sur le blo

Summary of the content on the page No. 18

Consignes d’utilisation – Service horizontal « – » : génère une ligne Mise en service laser horizontale, • Protéger l’appareil de mesure contre l’humidité, ne pas l’exposer aux rayons directs du soleil. – Service vertical « l » : génère une ligne laser verticale, • Ne pas exposer l’appareil de mesure ą des températures extrźmes ou de forts changements – Mode lignes croisées « + » : génère une ligne laser de température. Ne le laissez pas traîner horizontale et une ligne laser verticale. lon

Summary of the content on the page No. 19

Mode de verrouillage – Travail sans mise ą niveau possible de tenir l’appareil de mesure simplement en automatique (voir Figure D) main ou de le poser sur un support approprié. En mode lignes croisées, les deux lignes laser ne sont plus Pour travailler sans nivellement automatique, poussez forcément perpendiculaire l’une par rapport à l’autre. l’interrupteur Marche/Arrêt 7 dans la position « on». Lorsque le nivellement automatique est hors Instructions d’utilisation fonctionnement, les lign

Summary of the content on the page No. 20

5, 5,0 m 5 5, ,0 m un nivellement automatique et marquer le point de – Ajuster l’appareil de mesure en hauteur (à l’aide du croisement des faisceaux laser sur le mur trépied ou, le cas échéant, par des cales A (point III). appropriées) de sorte que le milieu du faisceau laser touche le point II sur le mur B tracé auparavant. – L’écart d entre les deux points I et III marqués sur mur A indique la divergence de précision réelle de – Sur mur A, marquer le milieu du faisceau laser l’appareil de


Alternative user manuals
# User manual Category Download
1 Edelbrock 1552 User manual Laser Level 0
2 ADC P-80-412 User manual Laser Level 0
3 Aprilaire 800 User manual Laser Level 2
4 Black & Decker BDL220S User manual Laser Level 150
5 Black & Decker 618898-00 User manual Laser Level 6
6 Black & Decker Crosshair BDL400S User manual Laser Level 138
7 Bosch Power Tools GPL5 User manual Laser Level 52
8 Bushnell FUSION 1600 201250 User manual Laser Level 18
9 Chauvet User manual Laser Level 5
10 Craftsman PALM GRIP LASER WITH LASER TRAC 320.48291 User manual Laser Level 33
11 Cooper Hand Tools LUFKIN LCL4 User manual Laser Level 4
12 Emerson Magnetostrictive Level Transmitter 350 User manual Laser Level 18
13 DeWalt Heavy Duty Rotary Laser DW071 User manual Laser Level 116
14 Epson DW076 User manual Laser Level 1
15 Emerson Magnetostrictive Level Transmitter 250 User manual Laser Level 2