Our goal is to provide you with a quick access to the content of the user manual for HP (Hewlett-Packard) HP PHOTOSMART C8100. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with HP (Hewlett-Packard) HP PHOTOSMART C8100.
If looking through the HP (Hewlett-Packard) HP PHOTOSMART C8100 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual HP (Hewlett-Packard) HP PHOTOSMART C8100 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to HP (Hewlett-Packard) HP PHOTOSMART C8100. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
HP Photosmart C8100 All-in-One series
Hewlett-Packard Company notices The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additio
Contents 1 HP All-in-One overview The HP All-in-One at a glance....................................................................................................2 Control panel features................................................................................................................3 Find more information.................................................................................................................4 Use the Roxio Creator Basic Software...........................
HP All-in-One overview 1 HP All-in-One overview Use the HP All-in-One to quickly and easily accomplish tasks such as printing photos from a memory card, burning and labeling CD/DVDs, scanning documents, or making a copy. You can access many HP All-in-One functions directly from the control panel, without turning on your computer. NOTE: This guide introduces basic operations and troubleshooting, as well as provides information for contacting HP support and ordering supplies. The onscreen Help det
(continued) Label Description 8 Front USB port 9 Wireless network indicator and Bluetooth light 10 LightScribe CD/DVD drive 11 Memory card slots and Photo light 12 Glass 13 Slide and Negative Film holder 14 Slide and Negative Film light 15 Lid 16 Lid backing 17 Slide and Negative Film light power port 18 Ethernet port 19 Rear USB port * 20 Power connection 21 Rear door * Use only with the power adapter supplied by HP. Control panel features The following diagram and related table provide a quick
HP All-in-One overview Chapter 1 Label Name and Description 1 Display: The touch screen display shows menus, photos, and messages. The control panel can be pulled up and angled for better viewing of this display. 2 Red Eye Removal: Turns the Red Eye Removal feature On or Off. By default, this feature is turned off. When the feature is turned on, the HP All-in-One automatically corrects red eye coloring in the photo currently shown on the display. 3 Cancel: Stops the current operation and returns
2 Network setup This section describes how to connect the HP All-in-One to a network and how to view and manage network settings. If you want to: See this section: Connect to a wired (Ethernet) network. “Wired network setup” on page 5 Connect to a wireless network with a wireless “Integrated wireless WLAN 802.11 network router (infrastructure). setup” on page 7 Connect directly to a wireless-capable “Wireless ad hoc network setup” on page 10 computer without a wireless router (ad hoc). Install t
Network setup Chapter 2 To set up the HP All-in-One on a wired See this section: network, you need to do the following: First, collect all of the required materials. “What you need for a wired network” on page 6 Next, connect to a wired network. “Connect the HP All-in-One to the network” on page 7 Finally, install the software. “Install the software for a network connection” on page 14 What you need for a wired network Before you connect the HP All-in-One to a network, make sure you have all of
Connect the HP All-in-One to the network To connect the HP All-in-One to the network, use the Ethernet port on the back of the device. To connect the HP All-in-One to the network 1. Remove the yellow plug from the back of the HP All-in-One. 2. Connect the Ethernet cable to the Ethernet port on the back of the HP All-in-One. 3. Connect the other end of the Ethernet cable to an available port on your Ethernet router, switch, or wireless router. 4. Once you have connected the HP All-in-One to the n
Network setup Chapter 2 The advantages of a wireless infrastructure network as compared to an ad hoc network include: • Advanced network security • Enhanced reliability • Network flexibility • Better performance, especially with 802.11 g mode • Shared Broadband Internet access To set up the HP All-in-One on an integrated See this section: wireless WLAN 802.11 network, you need to do the following: First, collect all of the required materials. “What you need for an integrated wireless WLAN 802.11
supports this feature. See the documentation that came with your wireless router or access point to find out if it supports using EasySetup and for additional setup instructions. CAUTION: To prevent other users from accessing your wireless network, HP strongly recommends using a password or passphrase (WPA or WEP security) and a unique network name (SSID) for your wireless router. Your wireless router might have been shipped with a default network name, which is typically the manufacturer name.
Network setup Chapter 2 c. When you have finished entering the new network name, touch Done, and then touch OK. If the HP All-in-One is unable to discover the network based on the network name you entered, you will be prompted to answer additional questions about your network, as described in steps d and e. Before continuing, move the HP All-in- One closer to the computer and run the Wireless Setup Wizard again to see if the HP All-in-One can discover your network automatically. d.Touch Infrastr
NOTE: An ad hoc connection is available if you do not have a wireless router or access point. However, it provides little flexibility, a low level of network security, and slower network performance than with a wireless router or access point. In order to connect the HP All-in-One to your computer (ad hoc), you need to create an ad hoc network profile on your computer. This includes choosing a network name (SSID) and WEP security (optional but recommended) for your ad hoc network. To set up the
Network setup Chapter 2 1. In the Control Panel, double-click Network Connections. 2. On the Network Connections window, right-click the Wireless Network Connection. If you see Enable on the pop-up menu, select it. Otherwise, if you see Disable on the menu, the wireless connection is already enabled. 3. Right-click the Wireless Network Connection icon, and then click Properties. 4. Click the Wireless Networks tab. 5. Select the Use Windows to configure my wireless network settings check box. 6.
Using the LAN card configuration program, create a network profile that has the following values: • Network name (SSID): Mynetwork (example only) NOTE: You should create a network name that is unique and easy for you to remember. Just remember that the network name is case-sensitive. Therefore, you must remember which letters are uppercase and lowercase. • Communication mode: Ad Hoc • Encryption: enabled Connect to a wireless ad hoc network You can use the Wireless Setup Wizard to connect the HP
Network setup Chapter 2 6. If prompted, enter your WEP key as follows. Otherwise go to step 7. a. Touch the appropriate letters or numbers on the visual keyboard. NOTE: You must enter the exact uppercase (capital) and lowercase (small) letters. Otherwise, the wireless connection will fail. b. When you are finished entering the WEP key, touch Done on the visual keyboard. 7. Touch OK again to confirm. The HP All-in-One will attempt to connect to the SSID. If a message says you entered an invalid W
Connect to additional computers on a network You can share the HP All-in-One on a network so that more computers can use it. If the HP All-in-One is already connected to a computer on the network, you must install the HP All-in-One software on the network for each of the computers. During the installation, the software will discover the HP All-in-One on the network for each of the computers. Once you have set up the HP All-in-One on the network you will not need to configure it again when you ad
Network setup Chapter 2 For more detailed instructions on connecting the HP All-in-One to a network, see: •“Wired network setup” on page 5 •“Integrated wireless WLAN 802.11 network setup” on page 7 •“Wireless ad hoc network setup” on page 10 Manage your network settings You can manage network settings for the HP All-in-One through the HP All-in-One control panel. Additional advanced settings are available in the Embedded Web Server, a configuration and status tool you access from your Web browse
Restore network defaults You can reset the network settings to what they were when you purchased the HP All-in- One. CAUTION: This will erase all wireless setup information that you have entered. In order to restore this information, you will need to run the Wireless Setup Wizard again. 1. Touch Setup on the display. 2. Touch Network. NOTE: If the menu option you want is not visible on the screen, touch or to scroll through all the menu options. 3. Touch Restore Network Defaults. 4. Touch Yes
Network setup Chapter 2 Change IP settings The default setting for the IP settings is Automatic, which sets the IP settings automatically. However, if you are an advanced user, you might want to manually change the IP address, subnet mask, or the default gateway. To see the IP address and subnet mask of the HP All-in-One, print a network configuration page from the HP All-in-One. NOTE: When manually entering an IP setting, you must already be connected to an active network, otherwise the setting
|1||HP (Hewlett-Packard) 4100 mfp||All in One Printer||21|
|2||HP (Hewlett-Packard) 3535||All in One Printer||26|
|3||HP (Hewlett-Packard) 140||All in One Printer||23|
|4||HP (Hewlett-Packard) 410||All in One Printer||31|
|5||HP (Hewlett-Packard) 7110||All in One Printer||46|