Our goal is to provide you with a quick access to the content of the user manual for HP (Hewlett-Packard) LASERJET 9040MFP. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with HP (Hewlett-Packard) LASERJET 9040MFP.
If looking through the HP (Hewlett-Packard) LASERJET 9040MFP user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual HP (Hewlett-Packard) LASERJET 9040MFP but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to HP (Hewlett-Packard) LASERJET 9040MFP. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
hp LaserJet 9040mfp
hp LaserJet 9050mfp
English hp LaserJet 9040mfp hp LaserJet 9050mfp Getting Started Guide
© 2004 Copyright Hewlett-Packard The only warranties for HP products and Trademark Credits Development Company, L.P. services are set forth in the express warranty Microsoft , Windows , and Windows NT statements accompanying such products and Reproduction, adaptation, or translation are U.S. registered trademarks of Microsoft services. Nothing herein should be construed without prior written permission is prohibited, Corporation. as constituting an additional warranty. except as allo
English Product Setup Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Where to look for information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Prepare product location. . . . . . . . . . . . .
Introduction Congratulations on your purchase of the HP LaserJet 9040mfp* (product number Q3726A) or HP LaserJet 9050mfp (product number Q3728A). The product comes standard with the following items: ● 256 MB random access memory (RAM) ● copying, digital sending, and wide-format printing capabilities ● two 500-sheet trays (Tray 2 and Tray 3) ● a 100-sheet multipurpose tray (Tray 1) ● a 2,000-sheet input tray (Tray 4) ● an embedded HP Jetdirect print server ● an internal hard disk ● a duplex pri
English Where to look for information Start guide This guide contains information about unpacking and installing your product. Use guide This guide contains detailed information about using and troubleshooting and is available on the CD-ROM that came with the product. If you would like a hard copy, use your product to print the use guide. Installation checklist This guide will help you set up and install your new product. For correct installation, please complete each section in order.
Step 1. Prepare product location Shipping box space requirements Make sure that your building has a door or receiving area large enough for delivery of the shipping box. The approximate dimensions of the shipping box are as follows: 1016 mm wide x 914 mm deep x 1148 mm tall (40 inches wide x 36 inches deep x 57 inches tall). Unpacking space requirements Before removing the plastic wrapping from the shipping box, make sure that you have enough space to remove the contents from the shipping box
English 826 mm 470 mm 3 4 1219 mm (48 in) (33 in) (19 in) Product size Prepare a location for the product that allows for these physical and environmental requirements: 1105 mm (44 in) 643 mm 457 mm 1 2 1201 mm (47 in) (25 in) (18 in) 533 mm (22 in) 648 mm 554 mm 643 mm 457 mm 1 (26 in) (22 in) (25 in) (18 in) 1 The smaller measurement is the space that is required to extend the stacker or stacker/stapler with the attachment bar still attached to the latch under Tray 4. The larger measureme
826 mm 470 mm 3 4 (33 in) (19 in) 1664 mm (66 in) 1105 mm (44 in) 643 mm 457 mm 1 2 1201 mm (47 in) (25 in) (18 in) 533 mm (22 in) 554 mm 648 mm 457 mm 643 mm 1 (26 in) (22 in) (18 in) (25 in) 1 The smaller measurement is the space that is required to extend the stacker or stacker/stapler with the attachment bar still attached to the latch under Tray 4. The larger measurement is the space that is required to remove the stacker or stacker/stapler from the product. The additional space allows
English 826 mm 470 mm 4 5 (33 in) (19 in) 1664 mm (66 in) 1194 mm (47 in) 643 mm 457 mm 1 2 1308 mm (52 in) (25 in) (18 in) 503 mm (20 in) 617 mm 691 mm 643 mm 457 mm 3 (24 in) (27 in) (25 in) (18 in) 1 This measurement is the space that is required to extend the multifunction finisher with the attachment bar still attached to the latch under Tray 4. To remove the attachment bar from the latch, the space that is required is 617.2 mm (24.3 inches). 2 This measurement is the space that is re
826 mm 470 mm 3 4 (33 in) (19 in) 1664 mm (66 in) 2 1018 mm (40 in) 643 mm 45 mm 1 (25 in) (18 in) 555 mm 463 mm 457 mm 643 mm 2 (22 in) (18 in) (18 in) (25 in) 1 This measurement is the space that is required for Tray 1 when it is fully extended for 11 x 17/A3- size media. 2 This measurement is the space that is required to extend the 8-bin mailbox when the attachment bar still attached to the latch under Tray 4. 3 This measurement shows the depth of the product, including the edge of the
English Location requirements for the product ● A level area on the floor, preferably a hard ● Adequate power supply (For the 110 V model, surface without carpet. a dedicated 15 A circuit is recommended; for the 220 V model, a dedicated 8 A circuit is recommended) ● Space allowance around the product. ● A stable environment—no abrupt temperature ● A well-ventilated room. or humidity changes. ● No exposure to direct sunlight or chemicals, ● Relative humidity 20% to 80%. including ammonia-bas
Step 2. Check package contents 220 V power cord, or 110 V power cord control panel overlays MFP product product software print cartridge CD-ROM Start guide (this manual) Quick Reference Poster Package contents 12 Product Setup ENWW
English Step 3. Remove the product from the shipping box WARNING! This product weighs approximately 143.2 kg (315 lb). HP recommends that the product be rolled on its wheels rather than be lifted. See the diagrams on the shipping box for unpacking instructions. The diagrams also include instructions on how to remove the product from the shipping pallet. ENWW Remove the product from the shipping box 13
Step 4. Remove internal packaging CAUTION The product contains orange shipping tape and internal packaging to prevent damage during shipping. You must remove all shipping materials and internal packaging in order for the product to function correctly. 1 Remove all orange packing material from the exterior of the product and remove any cardboard or styrofoam material that is not orange. 2 Remove all orange packing material from the output bin and the protective film from the control panel di
English Step 5. Identify product parts The following illustrations show the location and names of the primary product parts. 1 1 10 1 1 2 11 1 12 1 1 3 1 4 13 1 1 5 14 1 6 1 15 1 16 1 17 1 18 1 7 1 1 19 20 1 8 1 21 1 1 9 22 1 1 23 Product parts (front and back views) 1 ADF output bin 9 Tray 4 power-cord 18 Local area network connector (LAN) connector 2 Control panel with (RJ-45) graphical display 10 ADF cover 19 Foreign interface 3 Front door 11 ADF harness (AUX) 4 Tray 2 12 Tray 1 20 Parall
Step 6. Position the product 1 Unlock the front wheels of the product (if they are locked), and roll 1 the product to its permanent location. Leave space to walk behind the product and to install the output device. 2 Push the locking tabs on the front wheels to the lock position. Only the front wheels lock. 3 If the ADF output bin is installed, remove it. 4 Make sure that the scanner shipping lock is unlocked (moved to the right). The shipping lock is located on the left side of the scanner.
English Step 7. Install the print cartridge Note If you get toner on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into fabric. 1 Before removing the print cartridge from its packaging, set the print 1 cartridge on a sturdy surface. Gently slide the print cartridge out of the packaging. CAUTION To prevent damage to the print cartridge, use two hands when handling the cartridge. Do not expose the print cartridge to light for more than a
Step 8. Install output device Install the output device that you purchased. After the device is installed, go to step 9. Note Use the installation instructions that are packaged with the output device. The instructions might be on a CD-ROM. 3,000-sheet stacker/stapler 3,000-sheet stacker Multifunction finisher 8-bin mailbox Output devices 18 Product Setup ENWW
|1||HP (Hewlett-Packard) 4100 mfp||All in One Printer||21|
|2||HP (Hewlett-Packard) 3535||All in One Printer||32|
|3||HP (Hewlett-Packard) 140||All in One Printer||31|
|4||HP (Hewlett-Packard) 410||All in One Printer||13|
|5||HP (Hewlett-Packard) 7110||All in One Printer||46|