Streszczenie treści zawartej na stronie nr. 1
MatrixPRO- II
MATRIX SWITCHER SERIES
USER'S GUIDE
COVERS MatrixPRO-II 12X8 THROUGH 32X32 MODELS
Barco Inc. 11101-A Trade Center Drive Rancho Cordova California 95670-6119 USA 1.916.859.2500
26-0903105-00
Streszczenie treści zawartej na stronie nr. 2
2 MatrixPRO- II
Streszczenie treści zawartej na stronie nr. 3
CONTACT INFORMATION In This Appendix The following topics are discussed in this Appendix: Warranty Return Material Authorization (RMA) Contact Information Warranty All video products are designed and tested to the highest quality standards and are backed by a full 3-year parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. Barco warranties are only valid to the original purchaser/owner. Warranty related repairs include parts and labo
Streszczenie treści zawartej na stronie nr. 4
Copyright © Barco. February 26, 2010 All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco. Notice Barco provides this manual “as is” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fi tness for a particular purpose. Barco may make improvements and/or ch
Streszczenie treści zawartej na stronie nr. 5
Company Address Barco Inc. 11101 Trade Center Drive Rancho Cordova, California 95670 USA Phone: (916) 859-2500 Fax: (916) 859-2515 Website: www.barco.com Barco N.V. Noordlaan 5 8520 Kuurne BELGIUM Phone: +32 56.36.82.11 Fax: +32 56.35.16.51 Technical Support Customer Service Portal — www.barco.com/esupport (866) 374-7878 — Events (24/7) (866) 469-8036 — Digital Cinema (24/7) MatrixPRO- II 5
Streszczenie treści zawartej na stronie nr. 6
Operators Safety Summary The general safety information in this summary is for operating personnel. Do Not Remove Covers or Panels There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed. Power Source This product is intended to operate from a power source that will not apply more than 230 volts rms between the supply conductors o
Streszczenie treści zawartej na stronie nr. 7
Terms In This Manual and Equipment Marking WARNING Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of personnel. Highlights an essential operating procedure, condition or Note statement. CAUTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance
Streszczenie treści zawartej na stronie nr. 8
Change History Rev Date ECP # Description Approved By 00.00 4/1/10 577375 Initial Release R. Pellicano 01.00 4/22/10 577971 Updated feature descriptions and menus R. Pellicano 8 MatrixPRO- II
Streszczenie treści zawartej na stronie nr. 9
TABLE OF CONTENTS CONTACT INFORMATION .............................................................................................................3 IN THIS APPENDIX ...............................................................................................................................................3 W ARRANTY ...........................................................................................................................................................3 RETURN MATERIAL AUTHOR
Streszczenie treści zawartej na stronie nr. 10
INSTALLING THE LEGEND LABEL ASSEMBLY .....................................................................20 SETUP MODE ...................................................................................................................................21 MAIN SETUP MENU PAGE ................................................................................................................................21 INPUT SETUP MENU PAGE.........................................................................
Streszczenie treści zawartej na stronie nr. 11
INTRODUCTION The MatrixPRO-II family is a ground-up development aimed at bringing new capabilities and a new level of performance to matrix switching. In order for a display to accurately reproduce the original image, every component in the video system must have enough bandwidth to carry the signal and be as fl at as possible in order to maintain the clarity and color fi delity. The MatrixPRO-IIs set a new standard in both areas. Bandwidth and Frequency Response At the heart of the MatrixPRO-
Streszczenie treści zawartej na stronie nr. 12
gain settings for each input to maintain optimal S/N ratio. Serial and IP Control The MatrixPRO-II command set is an easy to follow easy to implement ASCII command set that gives control systems complete access to all functions. Each unit is equipped with an RS-232 serial port along with an IP port for today’s remote communications systems. NOTE: The default IP Address is: 192.168.0.244 FEATURES Very High and Very Flat Bandwidth 600MHz of Bandwidth to -3dB +/-1.0 dB to 300MHz Sizes to
Streszczenie treści zawartej na stronie nr. 13
APPLICATION EXAMPLES NATIVE MODE APPLICATION SPLIT MODE APPLICATION MatrixPRO- II i 13
Streszczenie treści zawartej na stronie nr. 14
INSTALLATION ENVIRONMENT The Matrix rack unit should be mounted in a rack where an AC power outlet is nearby. It is a direct AC plug in unit via the supplied EIA power cord. The front and back of the unit should be positioned so that both the installer and operator can conveniently access the front and back for wiring and adjustments. Check each the manufacturer's recommendations on cable requirements and termination. Use stan- dard approved wiring practices. The integrity of all audi
Streszczenie treści zawartej na stronie nr. 15
WIRING DETAIL FOR MatrixPRO-II MODELS WITH AUDIO OPTION MatrixPRO-II AUDIO INPUT CONNECTOR WIRING FROM A STEREO FROM A MONO UNBALANCED SOURCE UNBALANCED SOURCE AUDIO INPUT WIRING I I N N SIGNAL SIGNAL P P FLOW FLOW U U T T SHIELD SHIELD L+ L- SH R+ R- L+ L- SH R+ R- INSTALL JUMPER OPTIONAL JUMPER INSTALL JUMPERS OPTIONAL JUMPER FROM A STEREO BALANCED FROM A MONO BALANCED SOURCE SOURCE I I N N SIGNAL SIGNAL P P FLOW FLOW U U T T SHIELD (2) SHIELD L+ L- SH R+ R- L+ L- SH R+ R- INSTALL JUMPERS
Streszczenie treści zawartej na stronie nr. 16
RJ-45 LAN Interface Cabling This port is used to access the MatrixPRO-II via TCP-IP from a host computer or network. Cable type: RJ-45 Crossover for direct computer to MatrixPRO-II control RJ-45 Straight through for Network to MatrixPRO-II control Recommended Maximum Length: 329 feet Crossover Cable Standard Patch Cable NOTE: The default IP Address is: 192.168.0.244 RS-232 Remote Host Port Cabling (DB9) CABLE PC (typical) RN Remote DB9M RS-232 (DTE) DB9F DB9M Host Port The MatrixPRO-
Streszczenie treści zawartej na stronie nr. 17
LCD DISPLAY MENU TREE MatrixPRO- II 17 MAIN PAGE PRESET VOL MAIN SETUPS (PRESS AND TO ENTER) OUTPUT EXECUTE AUDIO PRESET INPUT OUTPUT SYSTEM PRESET RESET VOLUME SETUP SETUP SETUP SETUP MATRIX RETURN TO OUTPUT INPUT OUTPUT TECH PRESET FACTORY NUMBER NUMBER NUMBER SUPPORT NUMBER SETTINGS RETURN TO SETUPS VERSION OUTPUT AUDIO VIDEO SAVE ALL INFO LEVEL TYPE TYPE OUTPUTS? 866# ARE YOU SURE? OUTPUT INPUT RGB SET TIME/ SAVE MUTE TRIM DELAY DATE SELECTED SYNC EQ VIDEO SET TIM
Streszczenie treści zawartej na stronie nr. 18
UNDERSTANDING THE LCD DISPLAY SELECT BARCO MATRIXPRO-II PRESET VOL ESCAPE LCD SCREEN: The visual interface for the MatrixPRO-II rack SELECT PUSH BUTTON: used to select a menu item or an AV route UP AND DOWN ARROW PUSH BUTTONS: increases or decreases a menu value such as volume level or a numeric value. Also used to scroll through menu items. ESCAPE PUSH BUTTON: allows the user to cancel a command and back out to the previous menu page ON SCREEN MENU ITEM SELECT PUSHBUTTONS(4): used to sele
Streszczenie treści zawartej na stronie nr. 19
FRONT AND REAR PANEL VIEWS SOURCE SELECT BUTTONS - PUSH INPUT SELECT LCD DISPLAY SIMULTANEOUSLY TO ENTER PROGRAM MODE LCD FUNCTION BUTTONS OUTPUT SELECT VIDEO INPUT VIDEO OUTPUT VIDEO INPUT (1 THRU 8) (1 THRU 16) (9 THRU 16) AC POWER INPUT RS-232 REMOTE OR SERIAL CONTROL PORT 0 RJ45 LAN INTERFACE AUDIO INPUT AUDIO OUTPUT AUDIO INPUT (1 THRU 8) (1 THRU 16) (9 THRU 16) BARCO MSRF-1616 SHOWN MatrixPRO- II 19
Streszczenie treści zawartej na stronie nr. 20
INSTALLING THE LEGEND LABEL ASSEMBLY PRINT LABEL STRIP FROM CD-ROM, FILE NAME : MATRIX LABEL.DOT 20 MatrixPRO- II
