ページ1に含まれる内容の要旨
MatrixPRO- II
MATRIX SWITCHER SERIES
USER'S GUIDE
COVERS MatrixPRO-II 12X8 THROUGH 32X32 MODELS
Barco Inc. 11101-A Trade Center Drive Rancho Cordova California 95670-6119 USA 1.916.859.2500
26-0903105-00
ページ2に含まれる内容の要旨
2 MatrixPRO- II
ページ3に含まれる内容の要旨
CONTACT INFORMATION In This Appendix The following topics are discussed in this Appendix: Warranty Return Material Authorization (RMA) Contact Information Warranty All video products are designed and tested to the highest quality standards and are backed by a full 3-year parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. Barco warranties are only valid to the original purchaser/owner. Warranty related repairs include parts and labo
ページ4に含まれる内容の要旨
Copyright © Barco. February 26, 2010 All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco. Notice Barco provides this manual “as is” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fi tness for a particular purpose. Barco may make improvements and/or ch
ページ5に含まれる内容の要旨
Company Address Barco Inc. 11101 Trade Center Drive Rancho Cordova, California 95670 USA Phone: (916) 859-2500 Fax: (916) 859-2515 Website: www.barco.com Barco N.V. Noordlaan 5 8520 Kuurne BELGIUM Phone: +32 56.36.82.11 Fax: +32 56.35.16.51 Technical Support Customer Service Portal — www.barco.com/esupport (866) 374-7878 — Events (24/7) (866) 469-8036 — Digital Cinema (24/7) MatrixPRO- II 5
ページ6に含まれる内容の要旨
Operators Safety Summary The general safety information in this summary is for operating personnel. Do Not Remove Covers or Panels There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed. Power Source This product is intended to operate from a power source that will not apply more than 230 volts rms between the supply conductors o
ページ7に含まれる内容の要旨
Terms In This Manual and Equipment Marking WARNING Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of personnel. Highlights an essential operating procedure, condition or Note statement. CAUTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance
ページ8に含まれる内容の要旨
Change History Rev Date ECP # Description Approved By 00.00 4/1/10 577375 Initial Release R. Pellicano 01.00 4/22/10 577971 Updated feature descriptions and menus R. Pellicano 8 MatrixPRO- II
ページ9に含まれる内容の要旨
TABLE OF CONTENTS CONTACT INFORMATION .............................................................................................................3 IN THIS APPENDIX ...............................................................................................................................................3 W ARRANTY ...........................................................................................................................................................3 RETURN MATERIAL AUTHOR
ページ10に含まれる内容の要旨
INSTALLING THE LEGEND LABEL ASSEMBLY .....................................................................20 SETUP MODE ...................................................................................................................................21 MAIN SETUP MENU PAGE ................................................................................................................................21 INPUT SETUP MENU PAGE.........................................................................
ページ11に含まれる内容の要旨
INTRODUCTION The MatrixPRO-II family is a ground-up development aimed at bringing new capabilities and a new level of performance to matrix switching. In order for a display to accurately reproduce the original image, every component in the video system must have enough bandwidth to carry the signal and be as fl at as possible in order to maintain the clarity and color fi delity. The MatrixPRO-IIs set a new standard in both areas. Bandwidth and Frequency Response At the heart of the MatrixPRO-
ページ12に含まれる内容の要旨
gain settings for each input to maintain optimal S/N ratio. Serial and IP Control The MatrixPRO-II command set is an easy to follow easy to implement ASCII command set that gives control systems complete access to all functions. Each unit is equipped with an RS-232 serial port along with an IP port for today’s remote communications systems. NOTE: The default IP Address is: 192.168.0.244 FEATURES Very High and Very Flat Bandwidth 600MHz of Bandwidth to -3dB +/-1.0 dB to 300MHz Sizes to
ページ13に含まれる内容の要旨
APPLICATION EXAMPLES NATIVE MODE APPLICATION SPLIT MODE APPLICATION MatrixPRO- II i 13
ページ14に含まれる内容の要旨
INSTALLATION ENVIRONMENT The Matrix rack unit should be mounted in a rack where an AC power outlet is nearby. It is a direct AC plug in unit via the supplied EIA power cord. The front and back of the unit should be positioned so that both the installer and operator can conveniently access the front and back for wiring and adjustments. Check each the manufacturer's recommendations on cable requirements and termination. Use stan- dard approved wiring practices. The integrity of all audi
ページ15に含まれる内容の要旨
WIRING DETAIL FOR MatrixPRO-II MODELS WITH AUDIO OPTION MatrixPRO-II AUDIO INPUT CONNECTOR WIRING FROM A STEREO FROM A MONO UNBALANCED SOURCE UNBALANCED SOURCE AUDIO INPUT WIRING I I N N SIGNAL SIGNAL P P FLOW FLOW U U T T SHIELD SHIELD L+ L- SH R+ R- L+ L- SH R+ R- INSTALL JUMPER OPTIONAL JUMPER INSTALL JUMPERS OPTIONAL JUMPER FROM A STEREO BALANCED FROM A MONO BALANCED SOURCE SOURCE I I N N SIGNAL SIGNAL P P FLOW FLOW U U T T SHIELD (2) SHIELD L+ L- SH R+ R- L+ L- SH R+ R- INSTALL JUMPERS
ページ16に含まれる内容の要旨
RJ-45 LAN Interface Cabling This port is used to access the MatrixPRO-II via TCP-IP from a host computer or network. Cable type: RJ-45 Crossover for direct computer to MatrixPRO-II control RJ-45 Straight through for Network to MatrixPRO-II control Recommended Maximum Length: 329 feet Crossover Cable Standard Patch Cable NOTE: The default IP Address is: 192.168.0.244 RS-232 Remote Host Port Cabling (DB9) CABLE PC (typical) RN Remote DB9M RS-232 (DTE) DB9F DB9M Host Port The MatrixPRO-
ページ17に含まれる内容の要旨
LCD DISPLAY MENU TREE MatrixPRO- II 17 MAIN PAGE PRESET VOL MAIN SETUPS (PRESS AND TO ENTER) OUTPUT EXECUTE AUDIO PRESET INPUT OUTPUT SYSTEM PRESET RESET VOLUME SETUP SETUP SETUP SETUP MATRIX RETURN TO OUTPUT INPUT OUTPUT TECH PRESET FACTORY NUMBER NUMBER NUMBER SUPPORT NUMBER SETTINGS RETURN TO SETUPS VERSION OUTPUT AUDIO VIDEO SAVE ALL INFO LEVEL TYPE TYPE OUTPUTS? 866# ARE YOU SURE? OUTPUT INPUT RGB SET TIME/ SAVE MUTE TRIM DELAY DATE SELECTED SYNC EQ VIDEO SET TIM
ページ18に含まれる内容の要旨
UNDERSTANDING THE LCD DISPLAY SELECT BARCO MATRIXPRO-II PRESET VOL ESCAPE LCD SCREEN: The visual interface for the MatrixPRO-II rack SELECT PUSH BUTTON: used to select a menu item or an AV route UP AND DOWN ARROW PUSH BUTTONS: increases or decreases a menu value such as volume level or a numeric value. Also used to scroll through menu items. ESCAPE PUSH BUTTON: allows the user to cancel a command and back out to the previous menu page ON SCREEN MENU ITEM SELECT PUSHBUTTONS(4): used to sele
ページ19に含まれる内容の要旨
FRONT AND REAR PANEL VIEWS SOURCE SELECT BUTTONS - PUSH INPUT SELECT LCD DISPLAY SIMULTANEOUSLY TO ENTER PROGRAM MODE LCD FUNCTION BUTTONS OUTPUT SELECT VIDEO INPUT VIDEO OUTPUT VIDEO INPUT (1 THRU 8) (1 THRU 16) (9 THRU 16) AC POWER INPUT RS-232 REMOTE OR SERIAL CONTROL PORT 0 RJ45 LAN INTERFACE AUDIO INPUT AUDIO OUTPUT AUDIO INPUT (1 THRU 8) (1 THRU 16) (9 THRU 16) BARCO MSRF-1616 SHOWN MatrixPRO- II 19
ページ20に含まれる内容の要旨
INSTALLING THE LEGEND LABEL ASSEMBLY PRINT LABEL STRIP FROM CD-ROM, FILE NAME : MATRIX LABEL.DOT 20 MatrixPRO- II
