Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Table of Contents ..............................................................................1 Getting started ..................................................................................2 Handset registration .......................................................................3 Touch phone use and handling ......................................................4 Basic operation .................................................................................5 Troubl
Streszczenie treści zawartej na stronie nr. 3
GETTING STARTED The AT&T ID-282H Accessory Handset is for use with the AT&T ID-2820 Digital Cordless Telephone with Touch Sensitive Keypad. You must have the AT&T ID-2820 Digital Cordless Telephone with Touch Sensitive Keypad in order to use the AT&T ID-282H Accessory Handset. This manual only describes the steps necessary to set up the ID-282H Accessory Handset. Please read the manual for the ID-2820 Digital Cordless Telephone for detailed operating instructions. ID-282H Package Contents Mak
Streszczenie treści zawartej na stronie nr. 4
Setup of the ID-282H Accessory Handset 1. Plug the AC Adapter cord into the base unit and then into a wall outlet. 2. Pull the battery contact tab out slowly and remove as shown. 3. Place the handset in the charging cradle. The battery icon on the display will flash and the base indicator light will turn on to show charging is in progress. Charge for at least 15 hours before registering the handset. Connect the charging cradle Pull and remove battery to a wall outlet contact tab USE ONLY CLASS
Streszczenie treści zawartej na stronie nr. 5
3. Touch to confirm. 4. You will see the message: ‘REGISTERING...’. Press and hold the PAGE key on the cradle of the base unit. 5. ‘REGISTRATION ACCEPTED’ indicates that handset is registered. ‘RETRY?’ indicates that registration has failed. Touch to retry or to quit. NOTE : The base unit will then send a signal to the handset registering the handset to the base unit. Once the Registration function has been completed, the handset will return to Standby Mode. TOUCH PHONE USE AND HANDLING •
Streszczenie treści zawartej na stronie nr. 6
BASIC OPERATION To adjust receiver / speakerphone volume: • Touch or during a call to raise or lower the volume. To make a call: 1. Touch and wait for a dial tone. 2. Enter destination phone number using numbers 0 - 9. If you make an error, touch to cancel. To answer a call: • Remove the handset from the base unit and touch . To redial the last number: 1. Touch then and wait for a dial tone. 2. Touch . To dial from the redial list: 1. Touch to access a list of the previous 20 dialed nu
Streszczenie treści zawartej na stronie nr. 7
3. The display will show 'DIAL' and 'DIAL 1+' options. Touch or to toggle between dialing a local call (DIAL) or a long distance call (DIAL 1+). Once you have selected the dialing option, press the key again. The number will be dialed as shown on the display. • DIAL: dials the number for a local call • DIAL 1+: dials the number for a long distance call To store a Caller ID number in Phonebook 1. Touch or to review the call log. The number of new and total calls will be displayed. 2. Us
Streszczenie treści zawartej na stronie nr. 8
8. Touch to confirm and save record. NOTE: A number can be saved without entering a name. When requested to enter the name, press key and move to number entry. To dial from Phonebook 1. Touch . 2. Touch or to select the record you wish to dial. 3. Touch to dial. To program your voice mail access number: 1. Press the key. When the key is pressed, and there is no voice mail number programmed, the unit will momentarily display ‘NO VMAIL SET’ and will then display VMAIL NUMBER to prompt yo
Streszczenie treści zawartej na stronie nr. 9
To page from base to handset(s): 1. Press PAGE on the base unit . 2. All of the handsets registered to the base will beep and the display will show PAGING. 3. Once the handset is located, press to discontinue paging. Intercom call: 1. Touch . 2. Use and to select ‘INTERCOM CALL’ from the menu and touch . 3. Use and to select a handset and touch or dial the handset number you wish to call. To transfer a call between handsets: 1. Touch during a call. 2. Use and to select ‘INTERCOM CALL’
Streszczenie treści zawartej na stronie nr. 10
Headset installation • The ID-282H may be used with any industry standard two-band 2.5mm headset, which must be purchased separately. Connect the headset to the jack located on the side of the handset. Your phone is now ready for headset use. You can purchase a suitable headset from AT&T or from any electronics retailer that sells phone equipment. Using the Room Monitor feature: To enable / disable the Room Monitor handset: 1. Touch and select the Room Monitor menu 2. Use or to select 'ON'
Streszczenie treści zawartej na stronie nr. 11
TROUBLESHOOTING See below for some common problems and their remedies. Whatever the problem, you should first check that: • The base unit is connected to the power supply and phone line. • The main power is switched on at the electrical outlet. • The handset battery is installed and has not run out of power. DO NOT attempt to make repairs yourself. This will void your warranty. PROBLEM POSSIBLE CAUSES / REMEDIES Unable to make • The handset is out of range of base a call - unit - move cl
Streszczenie treści zawartej na stronie nr. 12
Caller ID is not • You must subscribe to Call Waiting Caller ID displayed during a service through your local phone company for Call Waiting call this feature to work. Contact your local phone company to confirm you have subscribed to for Call Waiting Caller ID service. • While receiving the Call Waiting call, a second line was also off hook. The ID-282H cannot receive Call Waiting ID data when a second line is also off hook Handset does • Ring Volume is set to ‘OFF’ (see the not ring section
Streszczenie treści zawartej na stronie nr. 13
• Only one external call and one intermal Unable to make an intercom call can take place at once. Make intemal intercom call sure no other handset is making a call. SAFETY INFORMATION Warning! AT&T DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Observe the following safety precautions and warnings when setting up and using this product. 1. Read and understand all instructions. 2.
Streszczenie treści zawartej na stronie nr. 14
11. Unplug this product from the wall jack and refer servicing to qualified service personnel under the following conditions: a) If liquid has been spilled onto the product. b) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal op
Streszczenie treści zawartej na stronie nr. 15
2. Do not dispose of the battery pack in a fire; the cells may explode. Do not expose battery pack to water. Dispose of old, defective battery packs in an environmentally - friendly manner in accordance with the relevant legislation. 3. Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. The electrolyte may be toxic if swallowed. 4. Exercise care in handling the battery pack in order not to short the battery pack with conductin
Streszczenie treści zawartej na stronie nr. 16
• Handle the handset gently and carefully. Dropping it can damage circuit boards and cases and can cause it to malfunction. • Keep the handset away from excessive dust and dirt. Which can cause premature part wear. • Occasionally wipe the handset with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents. Modifying or tampering with the handset’s internal components can cause a malfunction and might invalidate the warranty and void your FCC a
Streszczenie treści zawartej na stronie nr. 17
SPECIFICATIONS TYPE DESCRIPTION Handset L x W x H 5.55 x 1.73 x 0.94 in Handset weight 4.41oz (with battery) Base L x W x H 3.68 x 3.13 x 1.50 in Base Weight 2.6 oz Standard Worldwide Digital Cordless Telecommunication (WDCT) Frequency range 2.4GHz ISM Channel bandwidth 1.729MHz Modulation GFSK Communication range Up to 984ft in open area Base power supply 120V / 60Hz Handset power supply 1 x NiMH 650mAh 3.6V (AAA) battery pack Operating time Talk: Approximately 5 hours Standby: Approximately 12
Streszczenie treści zawartej na stronie nr. 18
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
Streszczenie treści zawartej na stronie nr. 19
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the AT&T Customer Service Center. [For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: KT5W400BID2820. The digits represented by ## are the
Streszczenie treści zawartej na stronie nr. 20
questions about what will disable alarm equipment, consult AT&T Customer Service or a qualified alarm company. k. Privacy of communications may not be ensured when using the phone. NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor is recommended. NOTICE TO HEARING AID WEARERS: This telephone h
