Streszczenie treści zawartej na stronie nr. 1
Cordless Recipro Saw
MODEL 4390D
INSTR U CTION MANU AL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Streszczenie treści zawartej na stronie nr. 2
SPECIFICATIONS Model 4390D Length of stroke 15 mm (9/16”) Soft wood 24 mm (15/16”) Hard wood 12 mm (1/2”) Max. cutting capacities Pipe 40 mm x 2 mm (1-5/8” x 5/64”) (Outer dia. x Thickness) Strokes per minute 2,700/min. Overall length 343 mm (13-1/2”) Net weight 1.4 kg (3.1 lbs) Battery Cartridge 9000 Battery Charger DC9700A Voltage Input Output Charging time 9.6 V A. C. only 50 Hz - 60 Hz D.C.7.2 V - 9.6 V 1 Hr. • Manufacturer reserves the right to change specifications without notice. Specif
Streszczenie treści zawartej na stronie nr. 3
3. Keep bystanders, children, and visitors Tool Use and Care away while operating a power tool. Distrac- 12. Use clamps or other practical way to tions can cause you to lose control. secure and support the workpiece to a Electrical Safety stable platform. Holding the work by hand or against your body is unstable and may lead 4. A battery operated tool with integral bat- to loss of control. teries or a separate battery pack must be recharged only with the specified charger 13. Do not force tool.
Streszczenie treści zawartej na stronie nr. 4
22. When servicing a tool, use only identical SERVICE replacement parts. Follow instructions in 21. Tool service must be performed only by the Maintenance section of this manual. qualified repair personnel. Service or main- Use of unauthorized parts or failure to follow tenance performed by unqualified personnel Maintenance instructions may create a risk of may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES USB029-2 DO NOT let comfort or familiarity with product (gained from
Streszczenie treści zawartej na stronie nr. 5
SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE USC001-3 1. SAVE THESE INSTRUCTIONS - This man- 6. To reduce risk of damage to electric plug ual contains important safety and operat- and cord, pull by plug rather than cord ing instructions for battery charger. when disconnecting charger. 2. Before using battery charger, read all 7. Make
Streszczenie treści zawartej na stronie nr. 6
12. To reduce risk of electric shock, unplug 15. If operating time has become excessively charger from outlet before attempting any shorter, stop operating immediately. It maintenance or cleaning. Turning off con- may result in a risk of overheating, possi- trols will not reduce this risk. ble burns and even an explosion. 13. The battery charger is not intended for 16. If electrolyte gets into your eyes, rinse use by young children or infirm persons them out with clear water and seek medi- witho
Streszczenie treści zawartej na stronie nr. 7
FUNCTIONAL CAUTION: DESCRIPTION Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. 002481 Installing or removing battery cartridge Always switch off the tool before insertion or removal of 1 the battery cartridge. 2 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool. To insert the battery cartridge, align the tongue o
Streszczenie treści zawartej na stronie nr. 8
If you try to charge a battery cartridge from a just operated tool, sometimes the charging light will not come on. If this occurs, let the cartridge cool off for a while. Then re-insert it and try to charge it once more. When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it co
Streszczenie treści zawartej na stronie nr. 9
ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 002498 Installing or removing saw blade 1 CAUTION: 2 Always clean out all chips or foreign matter adhering to the blade, blade clamp and/or slider. Failure to do so may cause insufficient tightening of the blade, resulting in a serious injury. 3 To install the blade, loosen the bolt on the blade clamp with 1. Roller the hex wrench. Keep the back edge o
Streszczenie treści zawartej na stronie nr. 10
002512 Hex wrench storage When not in use, store the hex wrench as shown in the figure to keep it from being lost. 1 1. Hex wrench OPERATION CAUTION: Always press the shoe firmly against the workpiece during operation. If the shoe is held away from the workpiece during operation, strong vibration and/or twisting will be produced, causing the blade to snap dangerously. Always wear gloves to protect your hands from hot flying chips when cutting metal. Be sure to always wear suitable eye prot
Streszczenie treści zawartej na stronie nr. 11
EN0001-1 Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. Ni-Cd 2. a) Take the battery to your nearest Makita Factory Ser- vice Center or b) Take the battery to your nearest Makita Authorized Service Center or Distributor that has been desig- nated as a Makita battery recycling location. Call your nearest Makita Service Center or Distributor to determine
Streszczenie treści zawartej na stronie nr. 12
Memo 12
Streszczenie treści zawartej na stronie nr. 13
First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold 13 Cut
Streszczenie treści zawartej na stronie nr. 14
MAIL THIS PORTION Your answers to the following questions are appreciated. 1. This product was purchased from: 3. How did you learn about this product: Home Center Other ( ) Magazine Radio Hardware/Lumber Store From Dealer Exhibition Tool Distributor Newspaper From Friend Industrial Supply Store Display Previous Usage Construction Supply Catalog Other ( ) 2. Use of the product is intended for: 4. Most favored points are: Construction Trade Design Repair Se
Streszczenie treści zawartej na stronie nr. 15
FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA COLORADO KENTUCKY NEW MEXICO PUERTO RICO 2365 Pelham Parkway 11839 E. 51st Ave. 1215 S. Hurstbourne Parkway 5805 Menaul Blvd. NE 200 Guayama St. Pelham, AL 35124 Denver, CO 80239-2709 Louisville, KY 40222 Albuquerque, NM 87110 Hato Rey, PR 00917 (205) 620-1791 (303) 371-2850 (502) 326-3740 (505) 881-4619 (787) 250-8776 ARIZONA CONNECTICUT LOUSIANA NEW YORK TENNESSEE 3707 E. Broadway Rd., Ste. 6 508 Spring St.
Streszczenie treści zawartej na stronie nr. 16
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of
