Resumo do conteúdo contido na página número 1
Web Camera
USER GUIDE
for
IP Camera WCAM71
Version 0.9
2004,06,24
© 2003 ST&T Group. All rights reserved. 1
Resumo do conteúdo contido na página número 2
Chapter One: Introduction......................................................... 3 Features ................................................................................................................................................. 3 Specification.......................................................................................................................................... 3 Package Content................................................................................
Resumo do conteúdo contido na página número 3
Chapter One: Introduction Features Easy to install, Plug and Play Remote surveillance via network Embedded Web Server to watch the video over the internet IP assignment via Web Page / Utility. Easy for user to set. Built-in CMOS module provides an All-In-One system Local/Remote Digital Recording Password protection Specification WCAM71 Image Sensor CMOS Image Sensor Resolution 320x240 / 640x480 Frame rate 1.5-5 fps Compression JPEG ROM 512KB Networking Network Int
Resumo do conteúdo contido na página número 4
Package Content IP camera WCAM71 5V DC / 1A Power Adapter Crosslink cable (RJ45) System Requirement Microsoft Windows 98 or later version. Microsoft Internet Explorer 6.0 or later version. JVM 1.3 or later version. Contact information Phone (+886-6-6006789 ext.213) for technical support and any other query. © 2003 ST&T Group. All rights reserved. 4
Resumo do conteúdo contido na página número 5
Chapter Two: Hardware of IP camera WCAM71 The appearance of IP camera WCAM71 © 2003 ST&T Group. All rights reserved. 5
Resumo do conteúdo contido na página número 6
Port and LEDs DC Power RJ-45 Transmit LED Power LED RJ-45: IP camera WCAM71 has one RJ-45 port for Ethernet connection. DC Power: IP camera WCAM71 use 5V DC / 1A Power Adapter. Power LED: It is ON when a valid connection occurs. Transmit LED: Blink when IP camera WCAM71 transmits Packets. © 2003 ST&T Group. All rights reserved. 6
Resumo do conteúdo contido na página número 7
Chapter Three: Connecting IP Camera WCAM71 This Chapter contains step-by-step instruction to connect IP camera WCAM71P to your network. Local Network (LAN) 1. Plug in the power supply. 2. Connect to your network with a RJ-45 Cable. 3. IP Camera WCAM71’s default IP address is 192.168.0.114. 4. Connect IP Camera WCAM71 to your local network, set the IP in the same network. You should be able to view the image. 5. If the IP address for your IP Camera WCAM71 and your Computer are diffe
Resumo do conteúdo contido na página número 8
7. Click on your TCP/IP protocol then click on < properties >. Under < Specify an IP address > enter the correct IP address and Subnet mask. Then restart your Network connection. 9. If your network is not connected to the Internet, you can use crosslink cable (RJ-45) that comes within the package. Connect RJ45 cable between your computer and IP Camera WCAM71. You will be able to view image through your browser by entering its IP address. World Area Network (WAN) IP camera WCAM71
Resumo do conteúdo contido na página número 9
Chapter Four: Browser This Chapter contains information about how to configure your IP camera WCAM71 and how to see the image. Login Entering IP Camera WCAM71 IP address in your browser, you will be able to access the homepage. If it’s the first time you login the homepage, you need to enter ”Password”. The default Password is ”1234”. For network security, please change password right now. Only one user can login at the same time. © 2003 ST&T Group. All rights reserved. 9
Resumo do conteúdo contido na página número 10
View If login is successful, the image and function buttons will be showed in the browser. 1. Show real-time image, or 2. Press “Image Parameter”, link to the image parameter setting page. 3. Press “Network Configuration”, link to the network configuration setting page. 4. Press “Change Password”, link to the password setting page. © 2003 ST&T Group. All rights reserved. 10
Resumo do conteúdo contido na página número 11
Change Password Input old password and new password, and then press “Save” button. The password will be changed, and return to View page. Image Parameter Press “Image Parameter” to set image parameters. © 2003 ST&T Group. All rights reserved. 11
Resumo do conteúdo contido na página número 12
Image parameters include resolution, anti-flicker, quality, and brightness. Network Configuration There are two ways to set network configuration – “Fixed IP” and “ADSL PPPoE”. 1. Fixed IP © 2003 ST&T Group. All rights reserved. 12
Resumo do conteúdo contido na página número 13
If using a fixed IP setting, please select “Fixed IP”, input IP Address, Gateway, Subnet Mask, and DNS. Then press “Save” to change network setting. The new setting takes effect immediately, so you must connect to new IP address. 2. ADSL PPPoE © 2003 ST&T Group. All rights reserved. 13
Resumo do conteúdo contido na página número 14
If using ADSL PPPoE, please select “ADSL PPPoE”, input ADSL User’s ID, ADSL User’s Password, E-mail, and SMTP Mail Server. After pressing “Save” button, IP camera will send a new IP address to the e-mail that you set. Then you can connect to new IP address. © 2003 ST&T Group. All rights reserved. 14
Resumo do conteúdo contido na página número 15
Chapter Five: Applications 1. Environment surveillance 2. House security 3. Baby/Home care 4. Office Internet © 2003 ST&T Group. All rights reserved. 15
Resumo do conteúdo contido na página número 16
Chapter Six: FAQ Q: IP Camera WCAM71 cannot show image. A: Reset IP camera WCAM71 and re-login. Try to set image parameters as QVGA (320x240) and low quality. Sometimes the condition of network is bad, and the image is not complete. The browser only shows complete image. Q: Sometimes the Network setting doesn’t work. A: Some IP address are reserved – “255.255.255.255”, “0.0.0.0”, “127.0.0.0”, “127.0.0.1” and “X.X.X.255”. You can’t use these IP address. © 2003 ST&T Group. Al
